JL Audio XDM300/1 : Mono Marine Amplifier, 300W/200W @ 2Ω/4Ω

Description

XDM-Series Monoblock Class-D Marine-Grade Amplifier, 300-Watts @ 2-Ohm or 200-Watts @ 4-Ohm

This little monoblock powerhouse employs JL-Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).

Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Specifications

@ 4 Ω 200 W RMS x 1 @ 14.4V
@ 3 Ω 250 W RMS x 1 @ 14.4V
@ 2 Ω 300 W RMS x 1 @ 14.4V
@ 1.5 Ω N/A
@ 4 Ω 160 W RMS x 1 @ 12.5V
@ 3 Ω 210 W RMS x 1 @ 12.5V
@ 2 Ω 270 W RMS x 1 @ 12.5V
@ 1.5 Ω N/A
Frequency Response 10 Hz - 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >120 / 50 Hz
Damping Factor @ 2 Ω >60 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge 8 AWG wire
Fuse Rating 30 A (AFS, AGU or MaxiFuse™)
Filter Mode(s) Low-Pass only
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer Yes
Filter Defeat Function Yes
Infrasonic Filter none
Bass Boost EQ No
Output Polarity Switch No
Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
Remote Bass EQ Boost Control No
Pass-Through Preamp Output Buffered
Height (H) 2.05 in / 52 mm
Width (W) 6.85 in / 174 mm
Depth (D) 7.09 in / 180 mm
Net Weight 3.8 lb / 1.72 kg

JL Audio XDM300/1 Manual

Product form

XDM-Series Monoblock Class-D Marine-Grade Amplifier, 300-Watts @ 2-Ohm or 200-Watts @ 4-Ohm This little monoblock powerhouse employs JL-Audio's high-speed NexD switching design to achieve unprecedented efficiency... Read more

In-store pickup or installation our shop location

SKU: 98680

Pre-Order Today!

$499.99

Description

XDM-Series Monoblock Class-D Marine-Grade Amplifier, 300-Watts @ 2-Ohm or 200-Watts @ 4-Ohm

This little monoblock powerhouse employs JL-Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).

Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Specifications

@ 4 Ω 200 W RMS x 1 @ 14.4V
@ 3 Ω 250 W RMS x 1 @ 14.4V
@ 2 Ω 300 W RMS x 1 @ 14.4V
@ 1.5 Ω N/A
@ 4 Ω 160 W RMS x 1 @ 12.5V
@ 3 Ω 210 W RMS x 1 @ 12.5V
@ 2 Ω 270 W RMS x 1 @ 12.5V
@ 1.5 Ω N/A
Frequency Response 10 Hz - 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >120 / 50 Hz
Damping Factor @ 2 Ω >60 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge 8 AWG wire
Fuse Rating 30 A (AFS, AGU or MaxiFuse™)
Filter Mode(s) Low-Pass only
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer Yes
Filter Defeat Function Yes
Infrasonic Filter none
Bass Boost EQ No
Output Polarity Switch No
Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
Remote Bass EQ Boost Control No
Pass-Through Preamp Output Buffered
Height (H) 2.05 in / 52 mm
Width (W) 6.85 in / 174 mm
Depth (D) 7.09 in / 180 mm
Net Weight 3.8 lb / 1.72 kg

JL Audio XDM300/1 Manual

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account