At this present time our store location is open by appointment only.

Line Converter

Automotive Line Converters for Sound System Installations

Automotive Line Converters for Sound System Installations

38 products

  • Last One! Axxess AXDSP-L : Amplifier Add-On LIne Converter Interface, 6ch DSP and BT-Media Player Upgradable

    Axxess AXDSP-L : Amplifier Add-On LIne Converter Interface, 6ch DSP and BT-Media Player Upgradable

    1 Available for pickup

    Six-Channel Line-Converter with DSP and Optional Add-on Hi-Res Digital Output, Bluetooth Media Player Upgradable Use the AXDSP-L with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to six channels of analog signal for use with an aftermarket amplifier or DSP. While this may be a “Lite” version, it still provides retention of many important vehicle functions. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits. There are four inputs and six outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10 ms. 2-Channel Digital Output Upgradeable with AXDSP-SP (sold separately)Convertible to a Media Receiver with AXDSPL-BT (sold separately) 15-band graphic EQ on each channel with high pass, low pass, and bandpass filters 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Selectable Graphic or Parametric EQ Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Chime control for GM/Chrysler vehicles Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Sync® and OnStar®) Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Micro “B” USB updatable 1-year limited warranty Axxess AXDSP-L Manual

    1 Available for pickup

    $329.99

  • Axxess AXDSPL-HK2 : Amplifier Add-On Line Converter & 6ch DSP, 2011-2016 KIA (SPDIF Amplified)

    Axxess AXDSPL-HK2 : Amplifier Add-On Line Converter & 6ch DSP, 2011-UP Hyundai KIA (SPDIF Amplified)

    Pre-Order Today!

    Amplifier Add-On OEM Line-Converter & T-Harness for Select 2011-UP SPDIF-Amplified Hyundai and KIA Vehicles Upgrade your sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Blue Link®/UVO) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Designed for S/PDIF amplified models Retains the ability to work with S/PDIF digitally controlled amplified systems Factory amplifier does NOT need to be retained Wiring to be completed at the amplifier location Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Micro “B” USB updatable 1-year limited warranty Applications - confirmed as of 2/7/2023 HYUNDAI Azera (Sony/Phillips) 2012-2017 Elantra 2011-2016 Equus 2011-2016 Sonata (JBL Amplifier) 2018-2020 Sonata (non-JBL) 2011-2013 Tucson 2011-2019 Veloster 2012-2017 KIA Cadenza 2014-2016 Optima 2011-2018 Soul (Standard Amplifier) 2012-2016 Sportage 2011-2016 Axxess AXDSPL-HK2 Manual

    Pre-Order Today!

    $440.00

  • Axxess AXDSPL-HK4 : Amplifier Add-On Line Converter & 6ch DSP, 2017-UP Hyundai KIA (SPDIF Amplified)

    Axxess AXDSPL-HK4 : Amplifier Add-On Line Converter & 6ch DSP, 2017-UP Hyundai KIA (SPDIF Amplified)

    Pre-Order Today!

    Amplifier Add-On OEM Line-Converter & T-Harness for Select 2017-UP SPDIF-Amplified Hyundai and KIA Vehicles Upgrade your sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP. Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do. Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall. Package includes the AXDSP-L and vehicle-specific T-harness 15-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 4 inputs and 6 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10 ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (Blue Link®/UVO) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Designed for S/PDIF amplified models Retains the ability to work with S/PDIF digitally controlled amplified systems Factory amplifier does NOT need to be retained Wiring to be completed at the amplifier location Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Micro “B” USB updatable 1-year limited warranty Applications HYUNDAI Elantra 2017-2020 Elantra GT 2018-2020 Kona 2018-2020 Santa Fe 2013-2020 KIA Cadenza 2017-2020 Forte 2019-2020 Niro (EV) 2019-2020 Niro (Hybrid Electrical) 2020-2020 Niro (Plug-In Hybrid) 2018-2020 Optima 2019-2020 Sorento 2017-2020 Soul 2017-2020 Soul EV 2020-2020 Sportage 2017-2020 Axxess AXDSPL-HK4 Manual

    Pre-Order Today!

    $440.00

  • Axxess AXDSPX-A2B2 : Amplifier Add-On Interface Adapter w/Amp Bypass Harness, 2015-UP Ford (Amplified B&O or Sony System)

    Axxess AXDSPX-A2B2 : Amplifier Add-On Interface Adapter w/Amp Bypass Harness, 2015-UP Ford (Amplified B&O or Sony System)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Line Converter with DSP and Factory-Amplifier Bypass-Harness for Select 2015-UP Amplified Ford Vehicles with Bang and Olufsen or Sony Sound Systems Upgrade your sound system with this cost-effective, easy-to-install DSPpackage that includes a vehicle-specific T-harness. Complete Tuning ControlInstallers will have full control to fine-tune each of the 10 channel outputs individually, controlled wirelessly via a free app available for smartphones and tablets. The app makes tuning easy with a 31-band graphic EQ and up to 10ms time delay for each channel, with independent high pass, low pass, and bandpass filters. Retain Features with a Built-in InterfaceUtilizing Axxess’s data interface technology, the AXDSP-X goes beyond what a traditional DSP can do and retains many of the features commonly lost when upgrading a sound system. Voice prompts, parking sensor chimes, and other factory chimes are retained with an adjustable volume control that many traditional DSPs cannot offer. This is a cost-effective solution for customers who want to retain their factory radio and improve their vehicle sound quality, while still retaining systems like SYNC or OnStar®. One Solution, Many ApplicationsThe AXDSP-X solution already works with a wide range of vehicle applications and systems, including OE or aftermarket radios, and fixed-level analog and/or digitally controlled amplified systems, in addition to non-amplified vehicles that do not have chimes. The AXDSP-X works with all the existing DSP T-harnesses and still offers the same easy installation behind the radio. Package includes the A2B interface, vehicle-specific T-harness, and amplifier bypass harness Designed for select vehicles with a B&O A2B amplifier Uses AXDSP-X technology 31-band graphic EQ or 5-band Parametric EQ Selectable high pass, low pass, or bandpass filters on each channel 6 inputs and 10 individually assignable outputs Independent equalization on each of the 6 outputs Selectable slope (12, 24, 36, or 48db per octave) Each channel can be delayed independently for up to 10ms Easy behind the radio installation in most applications Can be used with OE and aftermarket radios Clipping detection and limiting circuits Internal header port for adding interface modules Bass knob included Retains OE voice prompts (SYNC) with adjustable level Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level Chimes and voice prompts go through the aftermarket amplifier Factory amplifier does NOT need to be retained Settings adjusted wirelessly in a smart device application (tablet or mobile phone) Read, write, and store configurations for future recall Password-protect feature is available in the mobile app Micro “B” USB updatable 1-year limited warranty Applications - confirmed as of 1/9/2024 FORD Escape Sony 2015-2019 Fusion Sony 2017-2020 Bronco B&O system 2020-2023 Bronco Sport B&O system 2020-2023 EcoSport B&O system 2016-2023 Edge B&O system 2019-2023 Escape B&O system 2020-2023 Explorer B&O system 2020-2023 F-150 B&O system 2017-2022 F-250 B&O system 2020 Ranger B&O system 2019-2023 Axxess AXDSPX-A2B2 Manual

    Pre-Order Today!

    $499.99

  • Last One! Axxess AXLOC-BM1 : Amplifier Add-On Interface Adapter, 2001-2017 BMW MINI VW. Axxess AXLOC-BM1 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-BM1 : Amplifier Add-On Interface Adapter, 2001-2017 BMW MINI VW (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2001-2017 Non-Amplified BMW, MINI and Volkswagen Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-BM1 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications BMW 3 Series 2002-2006 5 Series 2001-2003 M3 2002-2006 X3 2004-2010 X5 2001-2006 Z4 2003-2008 MINI Clubman 2008-2014 Convertible 2009-2015 Coupe 2012-2015 Hatchback 2007-2013 Roadster 2012-2015 Volkswagon Beetle 2012-2015 CC 2009-2017 EOS 2007-2016 Golf 2002-2014 GTI 2006-2014 Jetta 2002-2015 Jetta Sportwagon 2010-2014 Passat 2002-2015 R32 2007-2008 Tiguan 2009-2015 Touareg 2004-2010 Axxess AXLOC-BM1 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-CH3 : Amplifier Add-On Interface Adapter, 2011-2020 Chrysler Dodge. Axxess AXLOC-CH3 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-CH3 : Amplifier Add-On Interface Adapter, 2011-2020 Chrysler Dodge (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2011-2020 Non-Amplified Chrysler and Dodge Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-CH3 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/5/2023 Chrysler 300 2011-2014 300C 2011-2014 Dodge Charger 2011-2014 Journey 2011-2020 Axxess AXLOC-CH3 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-CH4 : Amplifier Add-On Interface Adapter, 2007-2021 Chrysler Dodge Jeep. Axxess AXLOC-CH4 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-CH4 : Amplifier Add-On Interface Adapter, 2007-2021 Chrysler Dodge Jeep (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2007-2021 Non-Amplified Chrysler, Dodge and Jeep Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-CH4 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/5/2023 Chrysler 200 2011-2014 300 2008-2010 Aspen 2008-2009 Sebring 2007-2010 Town & Country 2008-2017 Dodge Avenger 2008-2014 Caliber 2009-2012 Caravan 2008-2020 Grand Caravan 2008-2020 Challenger 2008-2014 Charger 2008-2010 Dakota 2008-2011 Durango 2008-2013 Journey 2009-2010 Magnum 2008-2009 RAM 2009-2011 Jeep Commander 2008-2010 Compass 2009-2017 Grand Cherokee 2008-2013 Liberty 2008-2012 Patriot 2009-2017 Wrangler(JK) 2007-2021 Axxess AXLOC-CH4 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-CH5 : Amplifier Add-On Interface Adapter, 2007-2021 Chrysler Dodge Fiat Jeep RAM. Axxess AXLOC-CH5 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-CH5 : Amplifier Add-On Interface Adapter, 2007-2021 Chrysler Dodge Fiat Jeep RAM (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2007-2021 Non-Amplified Chrysler, Dodge, Fiat, Jeep and RAM Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel INTERFACE COMPONENTS AXLOC-CH5 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/5/2023 Chrysler 200 2015-2017 Pacifica 2017-2020 Dodge Dart 2011-2014 Durango 2011-2020 1500, 2500, 3500 2013-Up Fiat 500 2016-2019 500L 2014-2020 500X 2016-2021 Jeep Cherokee 2013-2021 Compass 2017-2021 Renegade 2015-2021 RAM Chassis Cab 2500/3500/4500/5500 2013-2021 Promaster 1500/2500/3500 2014-2021 Promaster City 2015-2021 Axxess AXLOC-CH5 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-FD1 : Amplifier Add-On Interface Adapter, 2003-2019 Ford Lincoln Mazda Mercury. Axxess AXLOC-FD1 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-FD1 : Amplifier Add-On Interface Adapter, 2003-2019 Ford Lincoln Mazda Mercury (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2003-2019 Non-Amplified Ford, Lincoln, Mazda and Mercury Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-FD1 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Ford Crown Victoria 2003-2011 E-Series 2014-2019 Econoline 2009-2013 Edge 2007-2010 Escape 2008-2012 Expedition 2003-2015 Explorer 2006-2010 F-150 2004-2014 F250/350/450/550 2005-2016 F650/750 2011-2019 Five Hundred 2005-2007 Flex 2009-2012 Focus 2005-2011 Freestar 2004-2007 Freestyle 2005-2007 Fusion 2006-2012 Mustang 2004-2014 Taurus 2008-2012 Thunderbird 2004-2005 Transit Connect 2010-2013 Lincoln LS 2003-2006 MKX 2007-2010 MKZ 2007-2009 Navigator 2003-2006 Town Car 2003-2011 Zephyr 2006 Mazda Tribute 2008-2011 Mercury Grand Marquis 2003-2011 Mariner 2005-2011 Milan 2006-2011 Montego 2005-2007 Monterey 2004-2007 Mountaineer 2006-2010 Sable 2008-2009 Axxess AXLOC-FD1 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-FD2 : Amplifier Add-On Interface Adapter, 2011-2021 Ford. Axxess AXLOC-FD2 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-FD2 : Amplifier Add-On Interface Adapter, 2011-2021 Ford (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2011-2021 Non-Amplified Ford Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-FD2 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Ford Edge 2011-2020 Escape 2013-2019 Explorer 2011-2019 F-150 2013-2020 F250/350/450/550 2017-2019 Fiesta 2011-2021 Focus 2012-2018 Fusion 2013-2019 Mustang 2015-2020 Ranger 2019-2020 Transit 150/250/350 2015-2019 Transit Connect 2014-2018 Axxess AXLOC-FD2 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-GM31 : Amplifier Add-On Interface Adapter, 2019-2021 Chevy GMC. Axxess AXLOC-GM31 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-GM31 : Amplifier Add-On Interface Adapter, 2019-2021 Chevy GMC (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2019-2021 Non-Amplified Chevy and GMC Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers. Contents AXLOC-GM31 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Chevy Camaro (RPO IOR) 2019-2021 Cheyenne (RPO IOR) 2019-2021 Colorado (RPO IOR) 2019-2021 Cruze 2019 Equinox (RPO IOR) 2019-2021 Malibu (RPO IOR) 2019-2021 Silverado (RPO IOR) 2019-2021 Sonic 2019-2021 Spark (RPO IOR) 2019-2021 GMC Canyon (RPO IOR) 2019-2021 Sierra (RPO IOR) 2019-2021 Terrain (RPO IOR) 2019-2021 Axxess AXLOC-GM31 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-GM44 : Amplifier Add-On Interface Adapter, 2010-2017 Chevy GMC. Axxess AXLOC-GM44 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-GM44 : Amplifier Add-On Interface Adapter, 2010-2017 Chevy GMC (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2010-2017 Non-Amplified Chevy and GMC Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-GM44 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Chevy Avalanche 2012-2013 Camaro 2010-2015 Cruze 2011-2015 Equinox 2010-2017 Express 2013-2015 Malibu 2013-2015 Sonic 2012-2014 Spark 2013-2015 Suburban 2012-2014 Tahoe 2012-2014 Trax 2015-2016 GMC Savana 2013-2015 Sierra 2012-2013 Terrain 2010-2017 Yukon/XL 2012-2014 Axxess AXLOC-GM44 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-GMLN1 : Amplifier Add-On Interface Adapter, 2006-2021 GM Vehicles. Axxess AXLOC-GMLN1 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-GMLN1 : Amplifier Add-On Interface Adapter, 2006-2021 GM (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2006-2021 Non-Amplified Buick, Cadillac, Chevy, GMC, Hummer, Pontiac, Saturn and Suzuki Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-GMLN1 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Buick Lucerne 2006-2011 Cadillac DTS 2006-2011 Escalade 2007-2014 SRX 2007-2009 Chevrolet Avalanche 2007-2013 Captiva Sport 2012-2015 Cheyenne (RPO IOB) 2016-2018 Cheyenne 2012-2014 Equinox 2007-2009 Express van (Full Size) 2008-2021 Impala Limited (Fleet) 2014 Impala 2006-2013 Monte Carlo 2006-2007 Silverado Pickup 2007-2013 Spark (RPO IOB) 2016-2018 Suburban 2007-2014 Tahoe 2007-2014 Traverse 2009-2017 GMC Acadia 2007-2016 Savana Full Size Van 2008-2014 Sierra (New Body) 2007-2013 Sierra 2500/3500 2014 Yukon XL / Denali 2007-2014 Yukon 2007-2014 Hummer H2 2008-2009 Pontiac Torrent 2007-2009 Saturn Outlook 2007-2009 VUE 2008-2009 Suzuki XL-7 2007-2009 Axxess AXLOC-GMLN1 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-GMLN10 : Amplifier Add-On Interface Adapter, 2016-2020 Chevy GMC. Axxess AXLOC-GMLN10 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-GMLN10 : Amplifier Add-On Interface Adapter, 2016-2020 Chevy GMC (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2016-2020 Non-Amplified Chevy and GMC Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-GM10 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Chevrolet Camaro 2016-2018 ‡ Colorado 2016-2018 ‡ Cruze 2016-2018 † Equinox 2018-2018 ‡ Malibu 2016-2018 † Silverado LD 2019-2019 ‡ Silverado 2016-2018 ‡ Silverado 2500/3500 2016-2019 ‡ Trax 2017-2020 †  GMC Acadia 2017-2019 ‡ Canyon 2017-2018 ‡ Sierra 2016-2018 ‡ Sierra Limited 2019-2019 ‡ Sierra 2500/2500 HD 2016-2019 ‡ † RPO IOA‡ RPO IOB Axxess AXLOC-GMLN10 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-HN2 : Amplifier Add-On Interface Adapter, 2008-2021 Acura Honda. Axxess AXLOC-HN2 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-HN2 : Amplifier Add-On Interface Adapter, 2008-2021 Acura Honda (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2008-2021 Non-Amplified Acura and Honda Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-HN2 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Acura TL 2009-2014 TSX 2009-2014 ZDX 2010-2013 Honda Accord 2008-2012 Civic 2009-2015 CR-V 2012-2016 Fit 2009-2017 HR-V 2016-2018 Insight 2010-2014 Odyssey 2011-2017 Pilot 2009-2017 Ridgeline 2009-2021 Axxess AXLOC-HN2 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-HN3 : Amplifier Add-On Interface Adapter, 2016-2021 Honda. Axxess AXLOC-HN3 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-HN3 : Amplifier Add-On Interface Adapter, 2016-2021 Honda (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2016-2021 Non-Amplified Honda Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-HN3 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Honda Civic 2016-2018 Civic Hatchback 2017-2018 CR-V 2017-2021 Fit 2018-2021 HR-V 2019-2021 Insight 2019-2021 Axxess AXLOC-HN3 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-HYKIA3 : Amplifier Add-On Interface Adapter, 2016-2021 Hyundai KIA. Axxess AXLOC-HYKIA3 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-HYKIA3 : Amplifier Add-On Interface Adapter, 2016-2021 Hyundai KIA (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2016-2021 Non-Amplified Hyundai and KIA Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-HYKIA3 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Hyundai Accent 2018-2021 Elantra 2017-2021 Elantra GT 2018-2021 IONIQ 2018-2021 Kona 2018-2021 Santa Fe 2019-2021 Santa Fe XL 2019 Sonata 2018-2021 Tucson 2019-2021 Veloster 2019-2021 KIA Cadenza 2017-2021 Forte 2017-2021 Forte 5 2017-2021 K5 2021-2021 Optima 2019- 2020 Sedona 2017-2021 Sorento 2017-2021 Stinger 2018-2021 Axxess AXLOC-HYKIA3 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-NIS1 : Amplifier Add-On Interface Adapter, 2007-2021 Nissan Subaru Suzuki. Axxess AXLOC-NIS1 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-NIS1 : Amplifier Add-On Interface Adapter, 2007-2021 Nissan Subaru Suzuki (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2007-2021 Non-Amplified Nissan, Subaru and Suzuki Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-NIS1 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Nissan 370Z 2009-2021 Altima 2007-2021 Cube 2009-2014 Frontier 2008-2021 Juke 2011-2017 Kicks 2018-2021 Leaf 2012-2021 Maxima 2007-2021 Murano 2009-2021 Murano (Cross-Cabriolet) 2011-2014 NV – 1500/2500/3500 2012-2021 NV200 2013-2021 Pathfinder 2013-2020 Quest 2011-2016 Rogue 2008-2017 Sentra 2007-2019 Titan, Titan XD 2017-2021 Titan 2008-2015 Versa 2007-2021 Versa Note 2014-2019 Xterra 2008-2015 Subaru Forester 2009-2015 Impreza 2008-2014 Legacy 2010-2014 Outback 2010-2014 WRX 2015 XV Crosstrek 2013-2014 Suzuki Equator 2009-2011 Axxess AXLOC-NIS1 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-TY1 : Amplifier Add-On Interface Adapter, 1987-2020 Toyota. Axxess AXLOC-TY1 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-TY1 : Amplifier Add-On Interface Adapter, 1987-2020 Toyota (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 1987-2020 Non-Amplified Toyota Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-TY1 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Toyota 4Runner 1987-2019 86 2017-2020 Avalon 1995-2018 C-HR 2018-2018 Solara 1999-2008 Camry 1987-2017 Celica 1989-2005 Corolla 1987-2019 Cressida 1987-1992 Echo 2000-2005 FJ Cruiser 2007-2014 Highlander 2001-2019 Land Cruiser 1988-1993 Matrix 2005-2013 MR2 1987-1995 MR2 Spyder 2000-2005 Paseo 1992-1997 Pickup 1987-1995 Previa 1991-1997 Prius 2001-2019 Prius C 2012-2019 Prius Prime 2017-2020 Prius V 2012-2017 RAV-4 1996-2018 Sequoia 2001-2019 Sienna 1996-2017 Solara 1999-2008 Supra 1986-1992 T-100 1993-1998 Tacoma 1995-2019 Tundra 2000-2019 Van 1987-1990 Venza 2009-2015 Yaris 2007-2018 Axxess AXLOC-TY1 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-TY3 : Amplifier Add-On Interface Adapter, 2018-2021 Toyota. Axxess AXLOC-TY3 : Amplifier Add-On Interface Adapter, connector view.

    Axxess AXLOC-TY3 : Amplifier Add-On Interface Adapter, 2018-2021 Toyota (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2018-2021 Non-Amplified Toyota Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-TY3 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Toyota 4Runner 2020-2021 Avalon 2019-2021 C-HR 2019-2021 Camry 2018-2021 Corolla 2019-2021 Highlander 2020-2021 Prius 2020-2021 RAV-4 2019-2021 Sequoia 2020-2021 Sienna 2018-2021 Tacoma 2020-2021 Tundra 2020-2021 Axxess AXLOC-TY3 Manual

    1 Available for pickup

    $67.99

  • Last One! Axxess AXLOC-VW2 : Amplifier Add-On Interface Adapter, 2015-2021 Volkswagen. Axxess AXLOC-VW2 : Amplifier Add-On Interface Adapter, connection view.

    Axxess AXLOC-VW2 : Amplifier Add-On Interface Adapter, 2015-2021 Volkswagen (Non-Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2015-2021 Non-Amplified Volkswagen Vehicles This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Contents AXLOC-VW2 Wiring Harness Gain Controller 12v-500mA Remote Wire Auxiliary Cable Applications - confirmed as of 2/6/2023 Volkswagen Beetle 2016-2021 Golf 2015-2021 Jetta 2016-2021 Passat 2016-2021 Tiguan 2016-2021 Axxess AXLOC-VW2 Manual

    1 Available for pickup

    $67.99

  • JL Audio LoC-22 : 2 Channel Line Output Converter JL Audio LoC-22 : 2 Channel Line Output Converter top side.

    JL Audio LoC-22 : 2 Channel Line Output Converter

    2 Available for pickup

    Fully Active 2-Channel Speaker Level to Line Output Converter Designed by JL Audio Sr. Engineer Bruce Macmillan, the LoC-22 is an active two-channel processor engineered for applications requiring the attenuation of factory audio signals for use with aftermarket amplifiers and signal processors. The LoC-22 utilizes a fully regulated, switching MOSFET power supply and an all-analog circuit design to deliver flat frequency response, at any signal level (3 Hz – 32 kHz, +0, -1dB), without altering bass response at high levels, like many passive line output converters do. Engineered to combat induced cable noise, the LoC-22 features a differential-balanced input architecture making it compatible with virtually any analog audio signal. Capable of accepting up to 40V RMS per channel (equivalent to 400W @ 4 ohms), the LoC-22 easily handles the most powerful factory amplifier outputs. An onboard dual-range input load switch allows compatibility with most factory amplifiers that employ impedance sensing to mute channels. Ideal for full-range or low-frequency applications, the LoC-22 is equipped with a pair of analog RCA-type, line-level output jacks (up to 8V RMS) to feed audio signals to your aftermarket system. Analog outputs are compatible with most types of aftermarket signal processors or amplifiers. Setting output levels is super simple and easy, thanks to a specially calibrated, onboard clipping indicator that works with test tones or music. The LoC-22 offers two automatic turn-on methods (DC-Offset Sensing or Signal Sensing) and provides a positive 12V turn-on output to activate aftermarket amplifiers or other downstream electronics. The LoC-22 includes the following features: Fully active, all analog circuit design by Bruce Macmillan, handles powerful factory amplifier outputs, up to 40 volts per channel Differential-balanced input architecture offers noise rejection and compatibility with most analog outputs from OEM source units and amplifiers Dual range input load switch (20 kΩ/Normal, 60 Ω/Low Z, thermally protected) for maximum compatibility with OEM amplifiers One stereo pair of crystal-clear, line-level RCA output jacks (up to 8V RMS) Automatic turn-on via DC-Offset or Signal-Sensing A dedicated 12V remote turn-on output (maximum 100 mA) to activate aftermarket signal processors or amplifiers Onboard LED clipping indicator makes output level setting quick & easy Ultra-compact chassis design fits into just about any installation location! Specifications Power Supply Type Switching, MOSFET PWM, Regulated Operating Voltage 9 - 16 V DC Standby Current Draw <1.6 mA Operating Current Draw 0.13 A at 13.8V Frequency Response 3 Hz - 32 kHz (+0 dB, -1dB) S/N Ratio @ 2V RMS Gain at Min: 118 dB Gain at Max: 103 dB (20 kHz Bandwidth) Remote Output Capacity 100 mA (maximum) Recommended Fuse Value 1 A Recommended Fuse Type Fast-Acting, ATO/ATC or similar Input Channels Two Input Type Differential-Balanced Input Voltage 40V RMS per channel (maximum) Input Impedance Normal: 20kΩLow Z: 60Ω Turn-On Threshold Signal-Sensing: 5 mV On/3.5 mV Off at1 kHz (Left Input) DC-Offset: 4.5 V Output Channels Two Analog Output Unbalanced, stereo RCA jacks Max. Unclipped Output 8V RMS Output Impedance 450 Ω Gain Range -27.3 dB (full CCW) to +3.2 dB (full CW) THD+N 0.01% at 2V RMS (1kHz) JL Audio LoC-22 Manual

    2 Available for pickup

    $99.99

  • Last One! Pac Audio AP4-CH21 : Amplifier Add-On Interface Adapter, 2007-2018 Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH21 : Amplifier Add-On Interface Adapter, 2007-2018 Chrysler Dodge Jeep RAM (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. Benefits Simplifies amplifier installation It prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention. Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications Year(s) Make Model Trim Level Additional Info 2008-2016 CHRYSLER TOWN & COUNTRY ALL TRIM LEVELS — 2008-2014 DODGE CHALLENGER ALL TRIM LEVELS — 2008-2010 DODGE CHARGER ALL TRIM LEVELS — 2009, 2011-2013 DODGE DURANGO ALL TRIM LEVELS — 2008-2018 DODGE GRAND CARAVAN ALL TRIM LEVELS — 2009-2012 DODGE RAM TRUCK ALL TRIM LEVELS — 2008-2013 JEEP GRAND CHEROKEE ALL TRIM LEVELS — 2007-2017 JEEP WRANGLER ALL TRIM LEVELS — 2018 JEEP WRANGLER JK — 2007-2017 JEEP WRANGLER UNLIMITED ALL TRIM LEVELS — 2018 JEEP WRANGLER UNLIMITED JK — 2010-2012 RAM RAM TRUCK ALL TRIM LEVELS — Pac Audio AP4-CH21 Manual

    1 Available for pickup

    $324.99

  • Pac Audio AP4-CH31 : Amplifier Add-On Interface Adapter, 2011-2016 Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH31 : Amplifier Add-On Interface Adapter, 2011-2016 Chrysler Dodge Jeep RAM (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (Dual MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications Year(s) Make Model Trim Level Additional Info 2011-2014 CHRYSLER 300 ALL TRIM LEVELS — 2011-2014 DODGE CHARGER ALL TRIM LEVELS — 2011-2015 DODGE JOURNEY ALL TRIM LEVELS — 2015 MASERATI GHIBLI ALL TRIM LEVELS — 2014-2016 MASERATI QUATTROPORTE ALL TRIM LEVELS — Pac Audio AP4-CH31 Manual

    Pre-Order Today!

    $324.99

  • Last One! Pac-Audio AP4-CH41 R.2 : Amplifier Add-On Interface Adapter, 2013-UP Chrysler Dodge Jeep RAM

    Pac Audio AP4-CH41 R.2 : Amplifier Add-On Interface Adapter, 2013-2022 Chrysler Dodge Jeep RAM (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2013-2022 Amplified Chrysler, Dodge, Jeep, Maserati and RAM Vehicles This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems  With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier Enables the addition of a subwoofer to an amplified sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately)  Includes AmpPRO module 52-pin harness (MS-CAN) Bass knob with harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01   Current Vehicle Compatibility as of 1/25/2023 Year(s) Make Model Trim Level Additional Info 2015-2017 CHRYSLER 200 ALL TRIM LEVELS — 2015-2022 CHRYSLER 300 ALL TRIM LEVELS — 2017-2022 CHRYSLER PACIFICA ALL TRIM LEVELS — 2015-2022 DODGE CHALLENGER ALL TRIM LEVELS — 2015-2022 DODGE CHARGER ALL TRIM LEVELS — 2014-2020 DODGE DURANGO ALL TRIM LEVELS — 2021 DODGE DURANGO ALL TRIM LEVELS 10.1" Screen 2021 DODGE DURANGO ALL TRIM LEVELS 8.4" Screen 2013-2021 DODGE RAM TRUCK ALL TRIM LEVELS — 2022 DODGE RAM TRUCK NON-CLASSIC — 2015-2021 JEEP CHEROKEE ALL TRIM LEVELS — 2020-2022 JEEP GLADIATOR ALL TRIM LEVELS — 2014-2021 JEEP GRAND CHEROKEE ALL TRIM LEVELS — 2022 JEEP GRAND CHEROKEE WK — 2018-2022 JEEP WRANGLER JL — 2021-2022 JEEP WRANGLER 4XE — 2018-2022 JEEP WRANGLER UNLIMITED JL — 2018 MASERATI LEVANTE ALL TRIM LEVELS — 2017 MASERATI QUATTROPORTE ALL TRIM LEVELS — 2013-2021 RAM RAM TRUCK ALL TRIM LEVELS — 2022 RAM RAM TRUCK NON-CLASSIC — Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin Compatible with both amplified and non-amplified factory systems. Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present. When installing into any of the following vehicles, the APHCH42 is required (sold separately): Year(s) Make Model Trim Level Additional Info 2021-2022 CHRYSLER PACIFICA ALL TRIM LEVELS — 2021 DODGE DURANGO ALL TRIM LEVELS 10.1" Screen 2022 DODGE RAM TRUCK NON-CLASSIC — 2022 RAM RAM TRUCK NON-CLASSIC — Amplified Vehicles Compatible with all data-bus controlled amplified systems, no matter the screen size (including the new 12" screen). To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. Non-Amplified Vehicles Jeep Wrangler/Gladiator: Compatible with all screen sizes (5”, 7”, and 8”). All other models: Only compatible in vehicles equipped with the 7” or 8” screen. Vehicles equipped with the 5” screen are not compatible. If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4 channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly. Non-amplified vehicles equipped with an Active Noise Cancellation (ANC) system require the ANC module to be bypassed. This can be done manually or with the ANC bypass harness ANC-CH01 (coming soon). Click here to see how to tell the difference between an amplifier and an ANC module and for module locations. The following vehicles have an ANC module that needs to be bypassed: 2017-2019 Chrysler Pacifica 2015-2016 Jeep Grand Cherokee 2019 RAM Truck (Non-Classic)

    1 Available for pickup

    $324.99

  • Pac Audio AP4-FD11 : Amplifier Add-On Interface Adapter, 2007-2014 Ford Lincoln

    Pac Audio AP4-FD11 : Amplifier Add-On Interface Adapter, 2007-2014 Ford Lincoln (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Compatibility Note: This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-FD01 harness (sold separately) Applications Year(s) Make Model Trim Level Additional Info 2009-2012 FORD F-150 ALL TRIM LEVELS — 2009-2012 FORD FLEX ALL TRIM LEVELS — 2010-2012 FORD FUSION ALL TRIM LEVELS — 2010-2012 FORD TAURUS ALL TRIM LEVELS — 2009-2012 LINCOLN MKS ALL TRIM LEVELS — 2010-2012 LINCOLN MKT ALL TRIM LEVELS — 2007-2010 LINCOLN MKX ALL TRIM LEVELS — 2007-2012 LINCOLN MKZ ALL TRIM LEVELS — 2007-2014 LINCOLN NAVIGATOR ALL TRIM LEVELS — Pac Audio AP4-FD11 Manual

    Pre-Order Today!

    $324.99

  • Pac Audio AP4-FD21 : Amplifier Add-On Interface Adapter, 2011-2020 Ford

    Pac Audio AP4-FD21 : Amplifier Add-On Interface Adapter, 2011-2020 Ford (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio and all warning chimes Plug & play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin and 54-pin harness (MS CAN) (Dual MS CAN) Bass knob Knob harness Manual Also available for fast easy install: APH-FD01 harness (sold separately) Applications - confirmed through 2/3/2023 Year(s) Make Model Trim Level Additional Info 2015-2017 FORD EDGE ALL TRIM LEVELS — 2016 FORD ESCAPE ALL TRIM LEVELS — 2015-2017 FORD EXPEDITION ALL TRIM LEVELS — 2011-2018 FORD EXPLORER ALL TRIM LEVELS — 2013-2017 FORD F-150 ALL TRIM LEVELS — 2013-2019 FORD F-250 ALL TRIM LEVELS — 2013-2019 FORD F-350 ALL TRIM LEVELS — 2013-2019 FORD F-450 ALL TRIM LEVELS — 2013-2019 FORD F-550 ALL TRIM LEVELS — 2012-2017 FORD FOCUS ALL TRIM LEVELS — 2013-2016 FORD FUSION ALL TRIM LEVELS — 2019-2020 FORD MUSTANG ALL TRIM LEVELS — 2013-2015 FORD TAURUS ALL TRIM LEVELS — Pac Audio AP4-FD21 Manual

    Pre-Order Today!

    $324.99

  • Pac Audio AP4-FD31 : Amplifier Add-On Interface Adapter, 2018-2022 Ford

    Pac Audio AP4-FD31 : Amplifier Add-On Interface Adapter, 2018-2022 Ford (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2018-2022 Amplified Ford  Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Simplifies amplifier installation in data-bus controlled factory sound systems Provides variable volume, control, fade, balance, bass, mid, and treble audio settings Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped) Front, rear, and sub preamp outputs (5V RMS) Plug-and-play installation with factory-matched harness Sub level controller included Optical output included Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2021 FORD BRONCO ALL TRIM LEVELS — 2021 FORD BRONCO SPORT ALL TRIM LEVELS — 2021 FORD ECO SPORT ALL TRIM LEVELS — 2019-2022 FORD EDGE ALL TRIM LEVELS — 2021-2022 FORD ESCAPE ALL TRIM LEVELS — 2018-2020 FORD EXPEDITION ALL TRIM LEVELS — 2020-2022 FORD EXPLORER ALL TRIM LEVELS — 2018-2022 FORD F-150 ALL TRIM LEVELS — 2020-2022 FORD F-250 ALL TRIM LEVELS — 2020 FORD F-350 ALL TRIM LEVELS — 2020 FORD F-450 ALL TRIM LEVELS — 2022 FORD LIGHTNING ALL TRIM LEVELS — 2022 FORD MAVERICK ALL TRIM LEVELS — 2021 FORD MUSTANG MACH E ALL TRIM LEVELS — 2020 FORD RANGER ALL TRIM LEVELS — Pac Audio AP4-FD31 Manual

    Pre-Order Today!

    $429.99

  • Pac Audio AP4-GM61 : Amplifier Add-On Interface Adapter, 2014-2019 Cadillac Chevy GMC.

    Pac Audio AP4-GM61 : Amplifier Add-On Interface Adapter, 2014-2019 Cadillac Chevy GMC (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC  Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Factory sound system upgrade Time-saving design Prevents the need for summing and audio correction devices Reliable PAC quality Features Upgrade solution for factory, fixed level, data-bus controlled sound systems The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes Front, rear, sub, and center channel preamp outputs (5 volt RMS) Provides full range, flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation Remote sub level controller INCLUDED Optional TOSLINK optical output with APA-TOS1 (sold separately) Includes AmpPRO module Harness Bass knob Knob harness Manual Also available for fast, easy install: APH-GM02 harness (sold separately) Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2015 CADILLAC ATS ALL TRIM LEVELS — 2017 CADILLAC CT6 ALL TRIM LEVELS — 2015-2019 CADILLAC ESCALADE ALL TRIM LEVELS — 2016-2018 CHEVROLET CAMARO ALL TRIM LEVELS — 2015-2018 CHEVROLET COLORADO ALL TRIM LEVELS — 2014-2019 CHEVROLET CORVETTE ALL TRIM LEVELS — 2017-2018 CHEVROLET CRUZE ALL TRIM LEVELS — 2018 CHEVROLET EQUINOX ALL TRIM LEVELS — 2014-2016 CHEVROLET IMPALA NON-CLASSIC — 2017-2019 CHEVROLET IMPALA ALL TRIM LEVELS — 2016 CHEVROLET MALIBU NON-CLASSIC — 2017-2018 CHEVROLET MALIBU ALL TRIM LEVELS — 2014-2018 CHEVROLET SILVERADO ALL TRIM LEVELS — 2019 CHEVROLET SILVERADO CLASSIC — 2015-2019 CHEVROLET SILVERADO HD ALL TRIM LEVELS — 2015-2019 CHEVROLET SUBURBAN ALL TRIM LEVELS — 2015-2019 CHEVROLET TAHOE ALL TRIM LEVELS — 2018-2019 CHEVROLET TRAVERSE ALL TRIM LEVELS — 2016-2018 CHEVROLET VOLT ALL TRIM LEVELS — 2018-2019 GMC ACADIA ALL TRIM LEVELS — 2015-2018 GMC CANYON ALL TRIM LEVELS — 2014-2018 GMC SIERRA ALL TRIM LEVELS — 2015-2019 GMC SIERRA HD ALL TRIM LEVELS — 2018 GMC TERRAIN ALL TRIM LEVELS — 2015-2019 GMC YUKON ALL TRIM LEVELS — 2015-2019 GMC YUKON XL ALL TRIM LEVELS — Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations

    Pre-Order Today!

    $429.99

  • Pac Audio AP4-TY11 : Amplifier Add-On Interface Adapter, 2002-2015 Lexus Toyota

    Pac Audio AP4-TY11 : Amplifier Add-On Interface Adapter, 2002-2015 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications - confirmed of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2011-2013 LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2002-2003 LEXUS ES 300 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2013-2014 LEXUS ES 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2004-2006 LEXUS ES 330 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2007-2009 LEXUS ES 350 ALL TRIM LEVELS — 2010-2014 LEXUS ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2009-2013 LEXUS GX460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2004-2009 LEXUS GX470 ALL TRIM LEVELS — 2010-2012 LEXUS HS 250H ALL TRIM LEVELS For AmpPRO: Without Navigation 2006-2009 LEXUS IS 250 ALL TRIM LEVELS — 2010-2013 LEXUS IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2006-2009 LEXUS IS 350 ALL TRIM LEVELS — 2010-2013 LEXUS IS 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 LEXUS IS F ALL TRIM LEVELS For AmpPRO: Without Navigation 2001-2006 LEXUS LS 430 ALL TRIM LEVELS — 2004-2006 LEXUS RX 330 ALL TRIM LEVELS — 2007-2009 LEXUS RX 350 ALL TRIM LEVELS — 2010-2015 LEXUS RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2006-2008 LEXUS RX 400H ALL TRIM LEVELS — 2010-2015 LEXUS RX 450H ALL TRIM LEVELS For AmpPRO: Without Navigation 2003-2013 TOYOTA 4RUNNER ALL TRIM LEVELS — 2005-2012 TOYOTA AVALON ALL TRIM LEVELS — 2013-2014 TOYOTA AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2007-2011 TOYOTA CAMRY ALL TRIM LEVELS — 2012-2014 TOYOTA CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2005-2011 TOYOTA COROLLA ALL TRIM LEVELS — 2011-2014 TOYOTA FJ CRUISER ALL TRIM LEVELS — 2008-2013 TOYOTA HIGHLANDER ALL TRIM LEVELS — 2008 TOYOTA LAND CRUISER ALL TRIM LEVELS — 2004-2011 TOYOTA PRIUS ALL TRIM LEVELS — 2012-2015 TOYOTA PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2004-2013 TOYOTA RAV-4 ALL TRIM LEVELS — 2014 TOYOTA RAV-4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2005-2012 TOYOTA SEQUOIA ALL TRIM LEVELS — 2013 TOYOTA SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness 2014 TOYOTA SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2004-2014 TOYOTA SIENNA ALL TRIM LEVELS — 2005-2013 TOYOTA TACOMA ALL TRIM LEVELS — 2005-2013 TOYOTA TUNDRA ALL TRIM LEVELS — 2009-2012 TOYOTA VENZA ALL TRIM LEVELS — 2013-2014 TOYOTA VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness Pac Audio AP4-TY11 Manual

    Pre-Order Today!

    $324.99

  • Pac Audio AP4-TY12 : Amplifier Add-On Interface Adapter, 2012-2019 Lexus Toyota

    Pac Audio AP4-TY12 : Amplifier Add-On Interface Adapter, 2012-2019 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2014-2017 LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 LEXUS ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 LEXUS GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 LEXUS IS 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2015 LEXUS IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 LEXUS IS 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 LEXUS NX 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 LEXUS NX 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 LEXUS RC 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 LEXUS RC 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 LEXUS RC 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 LEXUS RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2018 TOYOTA 4RUNNER ALL TRIM LEVELS — 2013-2014 TOYOTA AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2015-2018 TOYOTA AVALON ALL TRIM LEVELS — 2012-2014 TOYOTA CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2015-2017 TOYOTA CAMRY ALL TRIM LEVELS — 2014-2018 TOYOTA HIGHLANDER ALL TRIM LEVELS — 2012-2015 TOYOTA PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2016-2017 TOYOTA PRIUS ALL TRIM LEVELS — 2014 TOYOTA RAV-4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2015-2018 TOYOTA RAV4 ALL TRIM LEVELS — 2013 TOYOTA SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2014 TOYOTA SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2015-2018 TOYOTA SEQUOIA ALL TRIM LEVELS — 2015-2017 TOYOTA SIENNA ALL TRIM LEVELS — 2014-2018 TOYOTA TACOMA ALL TRIM LEVELS — 2014-2015 TOYOTA TUNDRA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2016-2019 TOYOTA TUNDRA ALL TRIM LEVELS — 2013-2014 TOYOTA VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2015-2016 TOYOTA VENZA ALL TRIM LEVELS — Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin

    Pre-Order Today!

    $324.99

  • Pac Audio AP4-TY13 (R.2) : Amplifier Add-On Interface Adapter, 2018-2021 Lexus Toyota

    Pac Audio AP4-TY13 (R.2) : Amplifier Add-On Interface Adapter, 2018-2021 Lexus Toyota (Amplified)

    Pre-Order Today!

    Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.  The harness connects to the radio for easier installation. Provides variable volume, fade, and balance Provides bass, mid and treble audio settings Retains warning chimes and navigation prompts Retains Bluetooth and telematic audio (if equipped) Front/Rear/Sub RCA outputs (5 Volt RMS) Includes sub level controller Optional TOSLINK optical output (APA-TOS1) sold separately. Optional speaker connection harness (APH-TY02) sold separately. Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level 2019-2021 LEXUS ES 250 ALL TRIM LEVELS 2019-2021 LEXUS ES 350 ALL TRIM LEVELS 2019-2021 LEXUS NX 300 ALL TRIM LEVELS 2019-2021 LEXUS RX 350 ALL TRIM LEVELS 2019-2020 LEXUS RX 450H ALL TRIM LEVELS 2019-2020 TOYOTA 4RUNNER ALL TRIM LEVELS 2019-2021 TOYOTA AVALON ALL TRIM LEVELS 2018-2021 TOYOTA CAMRY ALL TRIM LEVELS 2019 TOYOTA COROLLA ALL TRIM LEVELS 2020-2021 TOYOTA HIGHLANDER ALL TRIM LEVELS 2019-2020 TOYOTA RAV-4 ALL TRIM LEVELS 2019-2021 TOYOTA SEQUOIA ALL TRIM LEVELS 2018-2020 TOYOTA SIENNA ALL TRIM LEVELS 2019-2021 TOYOTA TACOMA ALL TRIM LEVELS 2019-2021 TOYOTA TUNDRA ALL TRIM LEVELS Pac Audio AP4-TY13 (R.2) Manual

    Pre-Order Today!

    $324.99

  • Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output, bottom side.

    Pac Audio APA-TOS1 : AmpPro Toslink Fiber-Optic Audio Output

    2 Available for pickup

    Add-On Fiber Optic Output for Select Pac-Audio AmpPro Interfaces The APA-TOS1 is a fiber-optic audio output add-on accessory for use with an AmpPRO interface. The APA-TOS1 easily installs in your AmpPRO interface and instantly provides a digital Toslink output. APA-TOS1 is compatible with any brand and length of Toslink cable for connection into a Toslink equipped DSP, or amplifier. Benefits APA-TOS1 provides a pure digital output for aftermarket amplifier and/or DSP installationDigital audio signals are less susceptible to noise/hiss or interference Features Quick and easy installation into any AmpPRO interfaceProvides digital fiber-optic variable audio signal outputCompatible with Toslink equipped DSPs or amplifiers NOTE: Toslink cable is not included Pac Audio AP4-TOS1 Manual

    2 Available for pickup

    $59.99

  • Last One! Pac Audio APH-TY01 : OE Amplifier Bypass Adapter, 2005-2021 Toyota

    Pac Audio APH-TY01 : OE Amplifier Bypass Adapter, 2005-2021 Toyota (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2005-2021 Amplified Toyota Vehicles Easily add amplifier(s) to Toyota factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY01 speaker connection harness when adding aftermarket amplifier(s) to select Toyota vehicles. Featuring OEM quality, factory style plugs, the APH-TY01 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY01 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY01 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2005-2010 TOYOTA AVALON ALL TRIM LEVELS — 2007-2011 TOYOTA CAMRY ALL TRIM LEVELS — 2009-2011 TOYOTA COROLLA ALL TRIM LEVELS — 2008-2013 TOYOTA HIGHLANDER ALL TRIM LEVELS — 2006-2011 TOYOTA PRIUS ALL TRIM LEVELS — 2006-2011 TOYOTA RAV-4 ALL TRIM LEVELS — 2009-2011, 2018-2021 TOYOTA TACOMA ALL TRIM LEVELS — 2007-2021 TOYOTA TUNDRA ALL TRIM LEVELS — Pac Audio APH-TY01 Manual

    1 Available for pickup

    $45.99

  • Last One! Pac Audio APH-TY02 : OE Amplifier Bypass Adapter, 2012-2022 Toyota Lexus

    Pac Audio APH-TY02 : OE Amplifier Bypass Adapter, 2012-2022 Toyota Lexus (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2012-2022 Amplified Toyota and Lexus Vehicles Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY02 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY02 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY02 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 or AP4-TY12 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY02 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2014-2017 LEXUS CT 200H ALL TRIM LEVELS — 2019-2021 LEXUS ES 250 ALL TRIM LEVELS — 2013-2020 LEXUS ES 300H ALL TRIM LEVELS — 2013-2021 LEXUS ES 350 ALL TRIM LEVELS — 2013-2020 LEXUS GS 350 ALL TRIM LEVELS — 2013-2018 LEXUS GS 450H ALL TRIM LEVELS — 2014-2017 LEXUS GX 460 ALL TRIM LEVELS — 2016-2017 LEXUS IS 200T ALL TRIM LEVELS — 2014-2015 LEXUS IS 250 ALL TRIM LEVELS — 2016-2020 LEXUS IS 300 ALL TRIM LEVELS — 2015-2017 LEXUS NX 200T ALL TRIM LEVELS — 2019-2021 LEXUS NX 300 ALL TRIM LEVELS — 2015-2017 LEXUS NX 300H ALL TRIM LEVELS — 2016-2017 LEXUS RC 200T ALL TRIM LEVELS — 2016-2020 LEXUS RC 300 ALL TRIM LEVELS — 2015-2020 LEXUS RC 350 ALL TRIM LEVELS — 2013-2021 LEXUS RX 350 ALL TRIM LEVELS — 2016-2021 LEXUS RX 450H ALL TRIM LEVELS — 2013-2020 TOYOTA AVALON ALL TRIM LEVELS — 2012-2021 TOYOTA CAMRY ALL TRIM LEVELS — 2019-2021 TOYOTA COROLLA ALL TRIM LEVELS — 2014-2021 TOYOTA HIGHLANDER ALL TRIM LEVELS — 2013-2021 TOYOTA LAND CRUISER ALL TRIM LEVELS — 2012-2021 TOYOTA PRIUS ALL TRIM LEVELS — 2013-2021 TOYOTA RAV-4 ALL TRIM LEVELS — 2021 TOYOTA SIENNA ALL TRIM LEVELS — 2007-2013, 2022 TOYOTA TUNDRA ALL TRIM LEVELS — Pac Audio APH-TY02 Manual

    1 Available for pickup

    $45.99

  • Last One! Pac Audio APH-TY03 : OE Amplifier Bypass Adapter, 2003-2010 Toyota

    Pac Audio APH-TY03 : OE Amplifier Bypass Adapter, 2003-2010 Toyota (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2003-2010 Amplified Toyota Vehicles Easily add amplifier(s) to Toyota factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections using the APH-TY03 speaker connection harness when adding aftermarket amplifier(s) to select Toyota vehicles. Featuring OEM quality, factory style plugs, the APH-TY03 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY03 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY03 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2003-2008 TOYOTA 4RUNNER ALL TRIM LEVELS — 2005-2008 TOYOTA COROLLA ALL TRIM LEVELS — 2004-2005 TOYOTA PRIUS ALL TRIM LEVELS — 2004-2005 TOYOTA RAV-4 ALL TRIM LEVELS — 2005-2007 TOYOTA SEQUOIA ALL TRIM LEVELS — 2004-2010 TOYOTA SIENNA ALL TRIM LEVELS — 2005-2008 TOYOTA TACOMA ALL TRIM LEVELS — 2005-2006 TOYOTA TUNDRA ALL TRIM LEVELS — Pac Audio APH-TY03 Manual

    1 Available for pickup

    $48.99

  • Last One! Pac Audio APH-TY04 : OE Amplifier Bypass Adapter, 2006-2021 Lexus Toyota

    Pac Audio APH-TY04 : OE Amplifier Bypass Adapter, 2006-2021 Lexus Toyota (Amplified)

    1 Available for pickup

    Add-On Amplifier OEM Integration Interface for Select 2006-2021 Amplified Lexus and Toyota Vehicles Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 and AP4-TY12 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY04 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications - confirmed as of 2/4/2023 Year(s) Make Model Trim Level Additional Info 2011-2013 LEXUS CT 200H ALL TRIM LEVELS — 2007-2012 LEXUS ES 350 ALL TRIM LEVELS — 2007-2011 LEXUS GS 350 ALL TRIM LEVELS — 2007-2011 LEXUS GS 450H ALL TRIM LEVELS — 2010-2013 LEXUS GX 460 ALL TRIM LEVELS — 2010-2012 LEXUS HS 250H ALL TRIM LEVELS — 2006-2013 LEXUS IS 250 ALL TRIM LEVELS — 2006-2013 LEXUS IS 350 ALL TRIM LEVELS — 2008-2012 LEXUS RX 350 ALL TRIM LEVELS — 2007-2008 LEXUS RX 400H ALL TRIM LEVELS — 2012 LEXUS RX 450H ALL TRIM LEVELS — 2010-2017, 2019-2021 TOYOTA 4RUNNER ALL TRIM LEVELS — 2011-2012 TOYOTA AVALON ALL TRIM LEVELS — 2008-2011 TOYOTA LAND CRUISER ALL TRIM LEVELS — 2008-2020 TOYOTA SEQUOIA ALL TRIM LEVELS — 2011-2020 TOYOTA SIENNA ALL TRIM LEVELS — 2012-2017 TOYOTA TACOMA ALL TRIM LEVELS — 2009-2016 TOYOTA VENZA ALL TRIM LEVELS — Pac Audio APH-TY04 Manual

    1 Available for pickup

    $45.99

  • Pac Audio LC-2 : Line Output Audio Converter with Bass Knob

    Pac Audio LC-2 : Line Output Audio Converter with Bass Knob

    Pre-Order Today!

    Audio Line-Output Converter with Rotary Volume Control

    Pre-Order Today!

    $24.99

Login

Forgot your password?

Don't have an account yet?
Create account