Alpine

The ALP-HRN-CAMCH is a Wrangler JK specific custom wiring harness and is just the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership. Alpine ALP-HRN-CAMCH Manual

Read more less

The HCE-RCAM-WRA lets you easily add an Alpine rear-view camera to your 2007-2018 Jeep Wrangler JK. It is compatible with Alpine in-dash screen systems, the factory Jeep screen or other aftermarket screens. If used with the factory screen, you can add the Alpine SGS-CH01 Camera Interface (sold separately) with Active Guide Lines, – without factory screen re-programming. With tons of wheel choices for the Wrangler, you need a versatile camera that works with any of them. The HCE-RCAM-WRA consists of the HCE-C1100 Rear-View Camera and bracket that is mounted between the spare tire and the Wrangler’s 5x5 wheel pattern. The upper portion of the bracket can be positioned to the left or right of the wheel’s spokes, ensuring that the attached camera has a clear line of sight behind the vehicle and is not blocked by the wheel.  Backing out of garages or riding through shady trails can be tough on a back-up camera. Standard cameras have difficulty managing changes in light, causing images to wash out and making it difficult to see what’s behind you at times. The HCE-RCAM-WRA has High Dynamic Range (HDR) technology for improved image quality. HDR technology can manage a wider range of luminance through the camera’s sensor as compared to standard cameras. Bright and dark areas are captured and adjusted for even exposure and white balance, preventing the image from being washed-out or too dark as you drive between sunlight and low-light conditions. Specifications Includes HCE-C1100 Rear Camera Adjustable bracket positions the camera in-between the wheel spokes Adjustable camera angle and height Alpine HCE-RCAM-WRA Manual

Read more less

Alpine Spare-Tire Rear-View Camera has a 7-inch diameter footprint and fits directly onto the spare tire mount, along with the tire itself. The result is a clean, integrated look that eliminates the need to drill holes to mount the camera into the bumper. The 6.25” W x 2” H LED third brake light provides added safety, while an additional reverse LED light illuminates the camera’s viewing angle for increased image visibility when your Wrangler is backing up. The optimized camera angle provides visibility for near and far objects behind your Jeep Wrangler; straight down and rear view (+5° up from horizontal which can be displayed on a factory or aftermarket in-dash screen (sold separately). The HCE-TCAM1-WRA is ready for your off-road adventures. The camera is waterproof and, dust-proof (at IP66 ratings), and the camera’s angle is optimized for viewing both near and far objects. The camera housing has a matte black finish with gun metal gray powder coat accents. Specifications Compatible with most Aftermarket and OEM wheels using spare tire mount Works with Aftermarket or OEM in-dash display P66 waterproof and dust-proof rugged camera system design Built-in brake and reverse lights for increased visibility Lug nut mounting for easy removal and wheel locking Optimized camera angle for near and far objects 3 mounting posts included for wheel/tire depth Alpine HCE-TCAM1-WRA Manual

Read more less

A premium sound system for your Jeep Wrangler JK Unlimited is. The PSS-22WRA is a 1200-watt, 9-speaker sound system for 2011-2018 Jeep Wrangler JK Unlimited, providing excellent sound performance with the top on or off.  Caught with the top off in inclement weather? Not to worry.  The PSS-22WRA is IP55 rated, so it can withstand rain and dust. The subwoofer uses rust resistant hardware and can handle water from off-roading adventures or a quick rinse down.  The PSS-22WRA’s subwoofer and amplifier don’t take up any usable space since they mount under the passenger’s seat for an easy bolt-in installation with simple wire routing. All necessary installation accessories are included.  The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-22WRA is compatible with any Alpine Restyle Jeep Wrangler dash system, the Jeep factory base radio, or other aftermarket radio. Specifications Direct fit weather resistant (IP55) speaker package for non-amplified 2011– 2018 4-door Jeep® Wrangler JK Unlimited 600W RMS System SPV-65X-WRA 6.5-inch Convertible Component/Coax water resistant speaker kit SBV-10-WRA 10-inch under passenger seat water resistant enclosed subwoofer KTA-30FW – 75W X 4ch Water Resistant Amplifier KTA-30MW – 300W Water Resistant Mono Amplifier Plug & play sound system Compatible with an Alpine Restyle In-Dash system, aftermarket head unit, or with the factory Jeep radio Includes remote bass knob, vehicle specific harnesses and mounting brackets Alpine PSS-22WRA Manual

Read more less

Alpine 300-Watt Powered Speaker-System Upgrade with Built-in Subwoofer for Select 2018-2022 Jeep-Wrangler and Gladiator-JT Vehicles Enjoy premium sound quality even with your JL’s top off! The PSS-23WRA is a 300 watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler-Unlimited-JL and Gladiator-JT vehicles without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off. The PWE-S8 subwoofer is engineered to load and disperse lower frequency sound into the passenger’s foot well area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy, bolt-in installation with simple wire routing. Mounting brackets for the products are included as well. The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high performance tweeters add much needed high frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response. The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. Specifications Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler Direct fit for non-amplified 2020–Up Jeep Gladiator JT 300 Watts RMS Plug & Play Sound System Compatible with aftermarket radio, or with factory Jeep Radio Includes remote bass knob, vehicle specific harnesses and mounting bracket Alpine PSS-23WRA Manual

Read more less

300-Watt Door-Speaker and Add-On Subwoofer Kit for Select 2018-UP Jeep Wrangler-JL and Gladiator-JT Vehicles The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018–Up Jeep Wrangler-JL and non-amplified 2020–Up Jeep Gladiator-JT. Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier. Specifications Complete, five-channel powered sound system upgrade package   Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangler Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U  180W, 4-channel Power Pack amplifier  120W, 8” powered subwoofer  (2x) 6.5” weather-resistant mid-bass drivers  (2x) 1” weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers  Vehicle specific front speaker pods with vehicle-specific connectors  Tweeter adapter plates allow for use of the original factory tweeter locations  SPV-65-JLT weather-resistant rear soundbar speaker system Rugged, premium grills designed to emulate the factory look and appeal   Vehicle-specific connectors for plug-and-play speaker installation   Utilizes factory bolt locations   Durable stamped, steel frame speaker basket design  Includes template for mounting Vehicle specific T-harness for installation with OEM radio into compatible 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles  Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling  What's in the Box: KTP-445U Universal 4-Channel Power Amplifier  PWE-S8 8" Compact Powered Subwoofer  SPV-65X-WRA Front Component Speakers SPV-65-JLT Rear Sound Bar Speakers ALP-POD-JLT Front Speaker Pod PSU-BKT-JL-R PWE Right Bracket JL PSU-BKT-JL-L PWE Left Bracket JL ALP-HRN-PSU300 PSU Power Harness  ALP-THRN-CH2 Chrysler T-Harness  CT6 6" Cable Ties PHPSM412 Pan Head Phillips Screw M4x12 SLWM4 M4 Split Lock Washers PHSCR832 8-32 Pan Head Phillips screws PSS-WRA-IM Installation Manual Specifications Front (SPV-65X-WRA) Power handling: 75 watts RMS (225 watts peak)  Frequency response: 65kHz – 22kHz  Nominal impedance: 4 ohms  Weather-resistant: IP55   Rear (SPV-65-JLT) Power handling: 90 watts RMS (270 watts peak)  Frequency response: 50kHz – 22kHz  Nominal impedance: 4 ohms  Weather-resistant: IP55 Powered Subwoofer (PWE-S8) 120 watts RMS (240 watts peak)  Frequency response: 32 - 150Hz  Variable low-pass crossover (80-200 Hz)  Variable phase control (0-180 degrees)  preamp- and speaker-level inputs  Four Channel Power Pack Amplifier (KTP-445U) 45 watts RMS x 4 at 4 or 2 ohms  90 watts RMS x 2 bridged at 4 ohms  Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)  Switchable RCA or speaker-level inputs| Dimensions:  27” L x 18.5” W x 19.5” H 40lbs Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler Direct fit for non-amplified 2020–Up Jeep Gladiator JT Alpine PSS-24WRA Installation Manual

Read more less

Alpine 8-Inch 120-Watt Compact Powered Subwoofer-System for 2011-UP 4-Door Jeep-Wrangler Unlimited The small, but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watt amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space. Subwoofer controls like Phase, Gain, LP Crossover and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to easily make bass level adjustments. Specifications 120 Watts bass upgrade for 2011-UP 4-door Jeep Wrangler* Under driver seat plug & play system for improved bass/mid-bass performance Works with an Alpine or aftermarket head unit, or with the factory Jeep radio Includes powered 8" subwoofer, remote bass knob, harnesses and mounting brackets Not compatible with the factory equipped subwoofer system Alpine PWE-S8-WRA Manual

Read more less

From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

Read more less

S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

Read more less

Alpine 75-Watt 2-Way Component Speaker-System for 2007-2018 Jeep Wrangler-JK These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears. The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar. Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction. Specifications 6.5” Component or Coaxial 2-Way Speaker System w/ Convertible Design Weather Resistant (IP55 rating) Power Handling: 75W RMS/225W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Teteron Dome Tweeter CustomSteel Frame w/ factory speaker mounting tabs OEM speaker connectors

Read more less