Alpine

A premium sound system for your Jeep Wrangler JK Unlimited is. The PSS-22WRA is a 1200-watt, 9-speaker sound system for 2011-2018 Jeep Wrangler JK Unlimited, providing excellent sound performance with the top on or off.  Caught with the top off in inclement weather? Not to worry.  The PSS-22WRA is IP55 rated, so it can withstand rain and dust. The subwoofer uses rust resistant hardware and can handle water from off-roading adventures or a quick rinse down.  The PSS-22WRA’s subwoofer and amplifier don’t take up any usable space since they mount under the passenger’s seat for an easy bolt-in installation with simple wire routing. All necessary installation accessories are included.  The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-22WRA is compatible with any Alpine Restyle Jeep Wrangler dash system, the Jeep factory base radio, or other aftermarket radio. Specifications Direct fit weather resistant (IP55) speaker package for non-amplified 2011– 2018 4-door Jeep® Wrangler JK Unlimited 600W RMS System SPV-65X-WRA 6.5-inch Convertible Component/Coax water resistant speaker kit SBV-10-WRA 10-inch under passenger seat water resistant enclosed subwoofer KTA-30FW – 75W X 4ch Water Resistant Amplifier KTA-30MW – 300W Water Resistant Mono Amplifier Plug & play sound system Compatible with an Alpine Restyle In-Dash system, aftermarket head unit, or with the factory Jeep radio Includes remote bass knob, vehicle specific harnesses and mounting brackets Alpine PSS-22WRA Manual

Read more less

R-Series Loaded 600-Watt Thin 10-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 10" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design Specifications Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling  Frequency response: 29Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

Read more less

R-Series Loaded 600-Watt Thin 12-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 12" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 12” R-Shallow Subwoofer (RS-W12D4) Rubber, modular stackable foot design Specifications Dimensions: 26.5” W x 5.25” H x 17” D 600W RMS Power Handling  Frequency response: 26Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

Read more less

S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

Read more less

Alpine S-Series 600-Watt 10-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications 10" DVC High Performance Subwoofer Power Handling: 600W RMS/1800W Peak Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 28Hz-200Hz Mounting Depth 4-11/16” Alpine S-W10D2, S-W10D4 Manual

Read more less

Alpine S-Series 600-Watt 12-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications Power Handling: 600W RMS/1800W Peak @ 2Ω Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 26Hz-200Hz Mounting Depth 5-1/16” Alpine S-W12D2, S-W12D4 Manual

Read more less