JL Audio

BassWedge-Series Dual 12-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 31.375 in / 797 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 60.3 lb / 27.35 kg JL Audio CP212-W0v3 Brochure

Read more less

W3-Series 13-Inch 600-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Single Voice Coil If you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels. As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability. The 13W3v3 2Ω or 4Ω model is best used with an amplifier powered in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. General Specifications Continuous Power Handling (RMS) 600W Recommended Amplifier Power (RMS) 150 - 600W Nominal Impedance (Znom) 4Ω Nominal Diameter 13.5 in / 345 mm Overall Diameter (A) 14.0 in / 356 mm Mounting Hole Diameter (B) 12.5625 in / 319 mm Bolt Hole Circle Diameter (C) 13.2 in / 335 mm Motor Outer Diameter (D) 5.79 in / 147 mm Mounting Depth (E) 7.63 in / 194 mm Driver Displacement 0.096 cu ft / 2.72 liters Net Weight 17.75 lb / 8.05 kg Free Air Resonance (Fs) 23.66 Hz Electrical “Q” (Qes) 0.465 Mechanical “Q” (Qms) 6.774 Total Speaker “Q” (Qts) 0.435 Equivalent Compliance (Vas) 4.793 cu ft / 135.74 L One-Way Linear Excursion (Xmax)* 0.610 in / 15.5 mm Reference Efficiency (no) 0.37% Efficiency (1 W / 1 m)** 87.90 dB SPL Effective Piston Area (Sd) 103.850 sq in / 0.0670 sq m DC Resistance (Re) 3.569 Ω JL Audio 13W3v3 Manual

Read more less

W6-Series 10-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 10W6v3 subwoofer driver offers several technologies similar to JL Audio's W7AE top line of subwoofers to provide powerful advantages in motor linearity and suspension behavior. This 10" automotive sub has a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. This 10" W6v3 driver is best used with an amplifier in the 200W - 600W RMS range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. The JL Audio 10W6V3-D4 subwoofer driver comes with Dual 4Ω voice coils that allow the 10W6v3 to be installed in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200 - 600W RMS Nominal Impedance Dual 4Ω JL Audio 10W6v3 Manual

Read more less

High Output Series 10-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W6v3, and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-10W6v2/v3), if additional woofer protection is desired. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 12.125 in / 308 mm External Height (H) 14 in / 356 mm External Depth (D1) 21.75 in / 552 mm Net Weight 47.8 lb / 21.7 kg JL Audio HO110-W6v3 Brochure

Read more less

W6-Series 12-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 12" W6v3 subwoofer driver is an audiophile subwoofer that offers powerful advantages in motor linearity and suspension behavior. The 12W6v3 sub offers a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The JL 12W6v3-4 automotive sub is best used with an amplifier in the 200-Watt - 600-Watt RMS range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Greater excursion capability and higher power handling distinguish the 12" JL W6v3 subwoofer from the 12W3v3 12-inch subwoofer driver, allowing for higher output. Dual 4Ω voice coils allow the W6v3 to be wired in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200W - 600W RMS Nominal Impedance Dual 4Ω JL Audio 12W6v3 Manual

Read more less

TW5-Series 13.5-Inch 600-Watt Thin Subwoofer Driver, 2-Ohm or 4-Ohm SVC The JL Audio 13.5" TW5v2 thin subwoofer driver uses a chassis with a “concentric tube” structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the subwoofer chassis than with conventional thin sub designs, while allowing excellent linear excursion capability and mechanical stability. The 13TW5v2 improves upon the original 13-Inch TW5 driver with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is available in single 2-ohm and single 4-ohm voice coil configurations. In keeping with its “tight-spaces” mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 12-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer. The JL Audio 13TW5v2-2 and the 13TW5v2-4 thin subwoofers are best used with amplifier power in the 250-Watt - 600-Watt range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure. Never has such high-quality subwoofers-bass been possible in the most challenging thin installation applications. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 250W - 600W RMS Nominal Impedance 2Ω JL Audio 13TW5v2 Manual

Read more less

PowerWedge-Series 13-Inch 600-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure The 13TW5v2 low-profile subwoofer driver has received awards from around the world for its breakthrough performance capabilities in impossibly tight spaces. In this sealed Truck PowerWedge™ subwoofer system, JL harnessed the performance of this patented subwoofer driver to deliver amazing sub-bass performance from an enclosure that is only 7.25 in. (184 mm) deep at its base and 4.5 in. (114 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13TW5v2 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 250 - 600WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Sealed, truck enclosure Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 21.25 in / 540 mm External Height (H) 15.75 in / 400 mm External Depth (D1) 7.25 in / 184 mm External Top Surface Depth (D2) 4.5 in / 114 mm Net Weight 34 lb / 15.42 kg JL Audio CS113TG-TW5v2 Brochure

Read more less

High Output Series 12-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO112-W6v3, the high power handling of the 12W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3, and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2/v3), if additional woofer protection is desired. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 600WNominal Impedance: 2Ω General Specifications Continuous Power Handling (RMS) 600 W System Nominal Impedance 2 Ω Enclosure Type Chamber-coupled, slot-ported, rear-firing design Finish Dark gray carpet with black insert Grille Included No Physical Specifications External Width (W) 14.5 in / 368 mm External Height (H) 16 in / 406 mm External Depth (D1) 24 in / 610 mm Net Weight 60.7 lb / 27.52 kg JL Audio HO112-W6v3 Brochure

Read more less

Single 13-Inch 600-Watt 4-Ohm Thin Subwoofer-Enclosure for Select 2007-2013 Toyota Tundra-CrewMax Pickups Toyota's largest truck offers amazing people space, but doesn't leave much for a traditional subwoofer enclosure. It's a good thing JL Didn't let conventional thinking get in the way of creating Stealthbox® solutions. Using the remarkable 13TW5v2 thin-line subwoofer, JL Audio have created a powerful Stealthbox® that can be installed behind the back seat of the big Tundra. One is enough for creating outstanding sub-bass with deep extension and solid impact, but for those looking for maximum performance, installing a pair of them will deliver up to 6dB more output. The Hard Data: Contains one 13TW5v2-4 subwoofer in a sealed enclosure. 600 watt power handling. Wired for 4 ohm mono. Installs behind the rear bench. One notch of seat travel is lost with installation and full-recline of the seat-back is only available when the seat is in its more forward positions. If the vehicle is equipped with the factory JBL® subwoofer, you must do one of the following to install the Stealthbox®: A) Permanently modify (cut) the factory trim panel.  B) Obtain a replacement “no-subwoofer” trim panel from Toyota Parts prior to installation. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-T-TUNDCMAX/13TW5v2 Installation Manual

Read more less

Single 600-Watt 2-Ohm Thin 13-Inch Subwoofer-Enclosure for Select 2004-2016 Ford SuperDuty Crew-Cab Trucks with FlexFold 60/40 Split-Bench Rear-Seat Ford's big trucks were designed to haul people and serious payloads with ease. They also present a tough challenge for a conventional subwoofer solution due to a severe shortage of unused space in the cab. It's a good thing JL didn't let convention get in the way of creating outstanding sub-bass. JL Audio now offers two clever Stealthbox® solutions for Ford's biggest hauler: one that installs inside the center console and this one: a super-thin, all fiberglass enclosure loaded with JL's revolutionary 13TW5v2 subwoofer and designed to install under the rear bench seat. So, if your console space is non-negotiable, you can still get world-class sub-bass that remains invisible and doesn't compromise your truck's people space. Whether your miles pile up towing a boat or using your truck for work, you can now enjoy every one of them with one of our Stealthbox® solutions. The Hard Data: Contains one 13TW5v2-2 subwoofer in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Installs under driver side of rear bench seat. Does not affect folding or reclining of seat. Please Note: “Black (leather)”, as indicated in the chart below is the OEM color/material. The Stealthbox® model that matches that OEM color is carpeted Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-SUPRCC/13TW5v2 Installation Manual

Read more less

Single 12-Inch 2-Ohm 600-Watt Subwoofer-Enclosure for Select 2016-Up Chevrolet-Camaro Coupe Vehicles Chevrolet’s 6th generation Camaro delivers a powerful shot of adrenalin and all-American, classic muscle car looks. Unfortunately, its stock sound system lacks real low-frequency punch and definitely needs some help in the bass department. This Stealthbox® is designed to produce powerful amounts of ultra-deep bass with minimal loss of useful cargo space. Its 100% fiberglass sealed enclosure houses a highly potent 12W6v3 JL Audio 12-inch subwoofer and neatly tucks into the driver side, rear corner of the trunk. Rear-seat pass-through functionality remains unaffected, and full access to the under floor battery compartment is retained. Also available in 12TW3 driver model. The Hard Data: Contains one 12W6v3-D4 in a sealed enclosure. 600 watt power handling. Wired for a 2 ohm load. Installs in the driver side rear corner of the trunk. Minimal loss of trunk space. Black steel mesh woofer grille included. Installation requires permanent modification to the driver’s side trunk liner. Will not fit convertible models! Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-CAM6G/12W6v3 Installation Manual

Read more less

Dual 10-Inch 600-Watt 2-Ohm Carpeted Fiberglass Subwoofer-Enclosure for Select 2002-2018 Dodge Ram 1500 Quad Cab, 2003-Up 2500 & 3500 Quad Cab & 2009-2018 1500 Crew Cab & 2009-Up 2500 & 3500 Crew Cab Trucks Dodge’s big hauler combines large sedan passenger comfort with tough pickup truck capabilities, but does not have a lot of extra interior space for a bulky subwoofer enclosure. JL's Stealthbox® for the Quad Cab® neatly negotiates these challenges and tucks under the rear seat, enclosing dual 10-inch thin line subwoofer drivers for impressive sub-bass performance. Seat folding and comfort are unaffected, and plenty of room is left in the center for amplifier installation or storage. Best of all, this Stealthbox® is essentially invisible once installed, but certainly noticeable when you fire up your favorite music and experience world-class sub-bass. The Hard Data:Contains two 10TW1-4 subwoofer drivers in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Some models may require cutting and removal of the underseat carpet and/or carpet padding. Will not fit Standard Cab, '02-'08 Crew Cab, or Mega Cab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-QDRAMD/10TW1 Installation Manual

Read more less

Dual 10-Inch 2-Ohm 600-Watt Thin Subwoofer-Enclosure for Select 2014-2018 Chevrolet-Silverado and GMC-Sierra Extended-Cab Trucks with Jet-Black or Dark-Ash Interior Whether your GM truck is used to work hard or play even harder, it brings a whole lot to the table, including great towing and hauling capabilities, a spacious interior and a smooth ride. JL's Stealthbox® enhances your GM truck by adding quality JL Audio bass without losing much of your precious space or interior functionality. Inside this Stealthbox®, two of JL Audio's revolutionary 10TW1 thin-line subwoofer drivers deliver absolutely stellar sub-bass impact and quality. The Hard Data: Contains two 10TW1-4 subwoofers in a sealed enclosure. 600 watt power handling. Wired for a 2 ohm load. Installs under rear seat. Will not affect the folding of the rear seat or rear leg room. Installation requires removal of plastic storage tray under rear seat (if equipped). Will not fit Crew Cab or Standard Cab trucks. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-SLVD/10TW1/BK Installation Manual

Read more less

Dual 10-Inch 600-Watt 2-Ohm Thin Subwoofer-Enclosure for Select 2020-UP Jeep Gladiator-JL Vehicles More than just a Jeep pickup, the Gladiator is an accomplished off-road vehicle with dramatic styling and advanced technology features. JL Audio's Stealthbox® enhances all this by adding impressive, high-quality bass without losing any of your precious people space or interior functionality. Featuring an all-fiberglass, sealed enclosure design, this Stealthbox® houses two of JL's innovative 10TW1 thin-line subwoofers and mounts neatly under the rear seat, without compromising rear passenger comfort. Rear seat folding is unaffected, and they even left space on the enclosure that’s perfect for a clean, hidden amplifier installation! The Hard Data: Contains two 10TW1-4 Subwoofers in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Installation requires removal of under seat storage compartment, if equipped. Retains hardtop hardware storage box and jack stowage. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-J-JTGLAD/10TW1 Installation Manual

Read more less