Automotive Electronics and Stereo Installation Accessories
Here you will find many items you will need when installing your automotive electronics. Many popular accessories are here like fuses, trim rings, wire harnesses, dash kits, audio and video cable, cameras, DVR's, DVD and CD players, and many more items. Please use the Filter to narrow your search results.
12-Gauge Speaker Cable - Blue/Clear Price by the Linear Foot.
$1.45
16-Gauge Speaker Cable 500' Roll - Blue/Clear Price by the Linear Foot.
$0.76
RBC-Series Remote Bass Control Knob for Select JL Amplifiers The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers: JD-Series: JD250/1, JD500/1, JD1000/1 JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) MX-Series: MX300/1, MX500/1 in Low Pass Mode (Note: M-RBC-1 is also available) RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5 When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The RBC-1 remotely controls the Bass Level of the following JL Audio subwoofer systems: PowerWedge+: All ModelsMicroSub+: All Models When the RBC-1 is connected to the above subwoofer systems, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers: Slash v3 Series: 600/1v3, 1200/1v3 Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2 Original Slash Series: 500/1, 1000/1, 450/4, 500/5 G-Series: All Models A-Series: All Models e-Series: All Models (including marine versions) M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600 When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller. The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable. JL Audio RBC-1 Manual
$54.99
Remote Bass Control Knob for Select JL Audio Amplifiers The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers: HD-Series: All modelsXD-Series: All modelsMHD-Series: All modelsM-Series: All models When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable. A satin-finish aluminum knob can be purchased separately. JL Audio HD-RLC Manual
$54.99
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2018-UP Jeep Wrangler-JL and Gladiator-JL Vehicles The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA. Includes predrilled mounting locations and hardware to install one of the following amplifier models: VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions JL Audio SBA-J-JLU-UAR Manual
$249.99
Ten-Inch Black-Mesh Grille for Select JL-Audio Subwoofer-Drivers Provide attractive, sturdy protection to your Subwoofer with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring. Fits: 10WX, 10WXv2, 10W0v2, 10W0v3, 10W1v2, 10W1v3, 10W3v3
$39.99
Twelve-Inch Black-Mesh Grille for Select JL-Audio Subwoofer-Drivers Provide attractive, sturdy protection to your Subwoofer with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring. Fits: 12WX, 12WXv2, 12W0v2, 12W0v3, 12W1v2, 12W1v3, 12W3v3
$49.99
Fuse-Holder Mounting Bracket for Under-The-Hood Locations in Select 2018-UP Jeep Wrangler-JL and Gladiator-JL Vehicles The SBA-J-JL-FHB Fuse Holder Bracket is designed to securely mount up to two JL Audio XB-MFBU-ANL Master ANL Fuse Blocks (sold separately). Engineered and Built in USA, the SBA-J-JL-FHB Fuse Holder Bracket requires no drilled holes and installs using factory hardware. The Hard Data: Attaches to the vehicle's firewall using factory hardware. Fits 2-Door or 4-Door models. Will not fit Rubicon 392 or models equipped with the EcoDiesel engine. Will not fit any 2018 "JK" Jeep® models. JL Audio SBA-J-JL-FHB Installation Manual
$99.99
Remote Bass Control Knob for Select JL Audio Amplifiers The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid port of compatible JL Audio electronics. Functions: Dual-concentric rotary controls with stops Push-button mode selector Status indicator (RGB LED) Common uses include: Master Volume Subwoofer Volume Preset or Mode Selection The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to. The DRC-205 is compatible with the following JL Audio products: FiX® OEM Integration DSP: All modelsTwK® System Tuning DSP: All modelsVXi-Series Amplifiers: All models JL Audio DRC-205 Manual
$129.99
Fuse-Holder Mounting Bracket for Under-The-Hood Locations in Select 2007-2018 Jeep Wrangler-JK Vehicles The SBA-J-JK-FHB Fuse Holder Bracket easily and securely mounts up to two JL Audio XB-MFBU-ANL Master Fuse Blocks (sold separately). Attaches to the firewall of your 2-door or 4-door Wrangler using factory hardware (no drilling required). Powder-coated steel, engineered and built in USA. JL Audio SBA-J-JK-FHB Installation Manual
$119.99
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2007-2017 Jeep Wrangler-JK Vehicles The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA. Will not fit 2-Door models. Includes predrilled mounting locations and hardware to install one of the following amplifier models: VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions JL Audio SBA-J-JKU-UAR Installation Manual
$279.99
Digital Optical Audio Interconnect Cable with Toslink Connectors - 12 ft (3.7 m)
$64.99
Water-Resistant Remote Bass-Knob for Select JL Audio Amplifiers The MHD-RLC remotely controls the Bass Level of the following JL Audio amplifiers: HD-Series: All models XD-Series: All models MHD-Series: All models M-Series: All models When the MHD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The MHD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 16.4 ft. (5 m) cable. A satin-finish aluminum knob can be purchased separately.
$79.99
