Loaded Subwoofer Enclosure

MicroSub-Series 8-Inch 250-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure  This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 250WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 250 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 18.625 in / 473 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm Net Weight 17.40 lb / 7.89 kg JL Audio CP108LG-W3v3 Brochure

Read more less

Ten-Inch Loaded Marine Subwoofer Enclosure, 400-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB102 and 46CWTB104 10-Inch loaded subwoofer enclosures works best with 400-watts of amplified power. Specifications Type Reflex Size (in., cm) 10, 25 Impedance (ohms) 2 Power Watts (peak/RMS) 800/400 Sensitivity (dB 1w/1m) 85.7 Box Bottom Depth (in, cm) 16-9/16, 42.1 Box Height (in, cm) Vert. Mount: 17-1/16, 43.4; Horiz. Mount: 10-3/4, 27.3 Box Width (in, cm) 10-5/8, 27 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

Read more less

MicroSub-Series 6-Inch 150-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 50 - 150WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 150 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 14.125 in / 359 mm External Height (H) 9.625 in / 245 mm External Depth (D1) 5.125 in / 130 mm Net Weight 12 lb / 5.44 kg JL Audio CP106LG-W3v3 Brochure

Read more less

12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 12" 2 Ω or 4Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 86.54 Box Top Depth (in, cm): 4-3/8, 11.2 Box Bottom Depth (in, cm): 7-3/4, 19.6 Box Height (in, cm): 13-3/4, 35 Box Width (in, cm): 21-1/2, 54.6 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

Eight-Inch Loaded Marine Subwoofer Enclosure, 300-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB82 and 46CWTB84 8-Inch loaded subwoofer enclosures works best with 300-watts of amplified power. Specifications Type Reflex Size (in., cm) 8, 20 Impedance (ohms) 2 Power Watts (peak/RMS) 600/300 Sensitivity (dB 1w/1m) 84.4 Box Bottom Depth (in, cm) 12-7/8, 32.8 Box Height (in, cm) Vert. Mount: 13-7/16, 34.1; Horiz. Mount: 8-5/8, 21.9 Box Width (in, cm) 8-1/2, 21.6 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

Read more less

10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Type single truck Woofer [in, cm] Solo-Baric L7T 10" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 85.98 Box Top Depth (in, cm): 4-3/8, 11.3 Box Bottom Depth (in, cm): 7-1/4, 18.5 Box Height (in, cm): 12, 30.4 Box Width (in, cm): 20-1/4, 51.5 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

8-Inch Thin Loaded Subwoofer Enclosure, 350-Watt RMS, 2-Ohm or 4-Ohm Impedance Barely six inches deep, the KICKER TL7T 8-Inch Subwoofer Enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 8" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 350 Sensitivity [dB 1w/1m] 84.835 Box Top Depth (in, cm): 3-5/8, 9.2 Box Bottom Depth (in, cm): 6-1/4, 16 Box Height (in, cm): 11-1/4, 28.5 Box Width (in, cm): 19-5/8, 50 What's in the box? one loaded enclosure with one 8-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

BassWedge-Series 12-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 16.31 in / 414 mm External Height (H) 15.18 in / 386 mm External Depth (D1) 20.3 in / 516 mm External Top Surface Depth (D2) 15.75 in / 400 mm Net Weight 33.1 lb / 15 kg JL Audio CP112-W0v3 Brochure

Read more less

12-Inch 300-Watt Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 12" loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  This thin 2Ω or 4Ω 12-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 12, 30 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 95.3 Box Top Depth (in, cm) 11 7/16, 29 Box Bottom Depth (in, cm) 14 5/8, 37.2 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 17 1/2, 44.5 Kicker CompC Subwoofer Enclosure Manual

Read more less

BassWedge-Series 10-Inch 300-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg JL Audio CP110-W0v3 Brochure

Read more less

10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

Read more less