Loaded Subwoofer Enclosure

From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

Read more less

R-Series Loaded 600-Watt Thin 12-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 12" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 12” R-Shallow Subwoofer (RS-W12D4) Rubber, modular stackable foot design Specifications Dimensions: 26.5” W x 5.25” H x 17” D 600W RMS Power Handling  Frequency response: 26Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

Read more less

12-Inch 1500-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This 12" L7 dual sub box enclosure features a custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch subwoofers pound out 1500W bass with a single 2Ω speaker terminal. Specifications Type dual Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 1500 Peak Power (watts, per ANSI/CTA-2031-A) 3000 SENSITIVITY [dB 1w/1m] 89.9 Box Top Depth (in, cm): 16 1/4, 41.3 Box Bottom Depth (in, cm): 19 1/2, 19.4 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 33 3/4, 85.7 Kicker CompC Subwoofer Enclosure Manual

Read more less

R-Series Loaded 600-Watt Thin 10-Inch 2-Ohm Subwoofer Enclosure Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow preloaded subwoofer enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series shallow subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling. Integrated cooling fins located in the core of the subwoofer help dissipate the heat generated by the rapid subwoofer movement for enhanced cooling reliability and hours of uninterrupted playtime. The unique CoolMount dual-panel mount subwoofer motor enhances cooling. Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in lower distortion and precise bass control. The preloaded enclosures use the subwoofer frame as bracing fora more ridged design and better bass response. A lightweight yet rigid aluminum dust cap allows the R-Series shallow subwoofer to transition sound quickly with minimal distortion and project the bass off the surface of the speaker for hard-hitting yet smooth bass performance. The included adjustable mounting brackets allow for a downfire mount configuration. With dual voice coils wired in parallel for a 2Ω load, the Alpine R-Series 10" shallow subwoofer enclosure is optimized to perform with Alpine's S-A60M or R-A75M mono amplifiers. Features Optimal sealed cabinet quality   Aluminum Dust Cap Neodymium Magnet    Alpine Gen2 DD Linear Magnetic Circuit   CARB compliant ¾” MDF construction   Premium Alpine embroidered black carpet  Alpine-branded terminal cup  Pre-installed steel mesh grille  Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design Specifications Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling  Frequency response: 29Hz – 200Hz  Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M)  Nominal Impedance: 2Ω  Voice Coil: 4”(101.6mm)

Read more less

S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

Read more less

Dual 12-Inch 1200-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series dual 12" loaded sub box by Kicker comes with two Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 12-inch L7 dual subwoofer enclosure is best suited with 1200W RMS of amplified power. Specifications Type dual Woofers/size [in, cm] 2 Solo-Baric L7R 12" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 1200 SENSITIVITY [dB 1w/1m] 95 Box Top Depth (in, cm): 15 1/4, 38.7 Box Bottom Depth (in, cm): 20 3/8, 51.8 Box Height (in, cm): 15 7/8, 40.2 Box Width (in, cm): 33 3/4, 85.7

Read more less

12-Inch 1000-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This CompR dual 12" subwoofer enclosure by Kicker makes surprisingly strong, smooth bass. Black carpeting with a front-facing tuned port raises the bar for acoustic efficiency, creating incredible bass levels.This CompR dual 12-Inch subwoofer enclosure works best with 1000 watts of recommended power. Specifications TYPE: dual NO. OF WOOFERS/SIZE (in, cm): (2) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 1000 Peak Power (watts, per ANSI/CTA-2031-A) 2000 SENSITIVITY (dB 1w/1m): 95.8 BOX TOP DEPTH (in, cm): 14, 35.6 BOX BOTTOM DEPTH (in, cm): 17 1/4,43.8 BOX HEIGHT (in, cm): 16, 40.6 BOX WIDTH (in, cm): 32 3/8, 82.3 Kicker CompR Subwoofer Enclosure Manual

Read more less

10-Inch 800-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This CompR dual 10" subwoofer enclosure by Kicker makes surprisingly strong, smooth bass. Black carpeting with a front-facing tuned port raises the bar for acoustic efficiency, creating incredible bass levels.This CompR dual 10-Inch subwoofer enclosure works best with 800 watts of recommended power. Specifications TYPE: dual NO. OF WOOFERS/SIZE (in, cm): (2) 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 800 Peak Power (watts, per ANSI/CTA-2031-A) 1600 SENSITIVITY (dB 1w/1m): 94 BOX TOP DEPTH (in, cm): 14 1/2, 36.8 BOX BOTTOM DEPTH (in, cm): 17 5/16,43.9 BOX HEIGHT (in, cm): 14, 35.6 BOX WIDTH (in, cm): 28 7/16, 72.3 Kicker CompR Subwoofer Enclosure Manual

Read more less

12-Inch 750-Watt Loaded Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series 12" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 12-inch L7 subwoofer enclosure is best suited with 750W RMS of amplified power. Specifications Type single Woofer [in, cm] Solo-Baric L7 12" Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 750 Peak Power (watts, per ANSI/CTA-2031-A) 1500 SENSITIVITY [dB 1w/1m] 86.9 Box Top Depth (in, cm): 14 3/4, 37.4 Box Bottom Depth (in, cm): 17 7/8, 45.5 Box Height (in, cm): 16, 40.6 Box Width (in, cm): 18-3/4, 47.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

Read more less

12-Inch 600-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 12" square sub box you get up to 20% more air movement compared to a round driver. This 600W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 12 Inch square driver with an RMS power rating of 600W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 12" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 94 Box Top Depth (in, cm): 8 1/2, 21.7 Box Bottom Depth (in, cm): 14 7/8, 37.8 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 28, 71.1 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

10-Inch 600-Watt Loaded Thin Subwoofer Enclosure, 2-Ohm Final Impedance This L7 series thin 10" loaded sub box by Kicker comes with one Solo-Baric L7S sub loaded into a custom engineered to spec subwoofer enclosure made of thick MDF construction with a custom port design. Heavy internal bracing with thick black carpeting complement the Kicker embroidered logo on this box. This 10-inch L7 thin subwoofer enclosure is best suited with 600W RMS of amplified power. Specifications Type thin-profile Woofer [in, cm] Solo-Baric L7S 10" 2Ω Impedance [Ohms] 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 SENSITIVITY [dB 1w/1m] 89.5 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 Kicker L7 Solo-Baric Subwoofer Enclosure Manual

Read more less

12-Inch 600-Watt Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance The CompC dual 12" sub box drivers from Kicker that are loaded into this spec-built enclosure have thick stamped steel baskets that hold injection-molded polypropylene cones with stabilizing ribs in the surround. This CompC 12" dual loaded sub box is rated for 600W RMS of amplified power at 2Ω.  Specifications Dual Subwoofers (in, cm) (2) 12, 30 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 99.9 Box Top Depth (in, cm) 14, 35.6 Box Bottom Depth (in, cm) 17 3/8, 44.1 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 32 3/8, 82.2 Recommended Amplifiers! CX600.1 Kicker CompC Subwoofer Enclosure Manual

Read more less

12-Inch Thin Loaded Subwoofer Enclosure, 600-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 12" 2 Ω or 4Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 600 SENSITIVITY [dB 1w/1m] 86.54 Box Top Depth (in, cm): 4-3/8, 11.2 Box Bottom Depth (in, cm): 7-3/4, 19.6 Box Height (in, cm): 13-3/4, 35 Box Width (in, cm): 21-1/2, 54.6 What's in the box? one loaded enclosure with one 12-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

10-Inch 500-Watt Loaded Square Subwoofer Enclosure, 2-Ohm Final Impedance With this L7R series 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This L7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88.8 Box Top Depth (in, cm): 8 1/4, 21 Box Bottom Depth (in, cm): 13 7/8, 35.1 Box Height (in, cm): 13, 33 Box Width (in, cm): 24, 61 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

10-Inch 600-Watt Dual Loaded Subwoofer Enclosure, 2-Ohm Final Impedance The CompC dual 10" sub box drivers from Kicker that are loaded into this spec-built enclosure have thick stamped steel baskets that hold injection-molded polypropylene cones with stabilizing ribs in the surround. This CompC 10" dual loaded sub box is rated for 600W RMS of amplified power.  Specifications Dual Subwoofers (in, cm) (2) 10, 25 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 600 Peak Power (watts, per ANSI/CTA-2031-A) 1200 Sensitivity (dB 1w/1m) 98.4 Box Top Depth (in, cm) 13 7/16, 34.1 Box Bottom Depth (in, cm) 16 3/8, 41.6 Box Height (in, cm) 14, 35.6 Box Width (in, cm) 28, 71.1 Recommended Amplifiers! Kicker CX600.1 Kicker CompC Subwoofer Enclosure Manual

Read more less

Dual 12-Inch Thin Subwoofer Enclosure, 500-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 12-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 12-inch subwoofer enclosure works best with 500-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 14-5/8, 37 BOX BOTTOM DEPTH (in, cm): 14-5/8, 37 BOX HEIGHT (in, cm): 6-1/8, 15.6 BOX WIDTH (in, cm): 27-1/2, 70 Kicker TRTP Subwoofer Enclosure Manual

Read more less

12-Inch 500-Watt Loaded Thin Dual Subwoofer Enclosure, 2-Ohm Configuration The CompRT 12" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω configuration. This thin 12 inch sub magnet structure delivers 500W RMS of power. The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 12" CompRT thin subwoofer driver nice and cool.The Kicker 43TCWRT122 12" subwoofer enclosure works best with 500 watts of RMS power. Specifications TYPE: single NO. OF WOOFERS/SIZE (in, cm): (1) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 98 BOX TOP DEPTH (in, cm): 3-1/2, 8.9 BOX BOTTOM DEPTH (in, cm): 7, 17.7 BOX HEIGHT (in, cm): 13-1/2, 34.3 BOX WIDTH (in, cm): 27, 68.5vv Kicker CompRT Subwoofer Enclosure Manual

Read more less

12-Inch 500-Watt Loaded Dual Subwoofer Enclosure, 2-Ohm Final Impedance The CompR 12-Inch Subwoofer Enclosure comes loaded, carpeted and ready to ride.Covered in stylish black carpeting and built with thick MDF, this loaded sub box is one of the sturdiest enclosures money can buy. The enclosure comes in a 2-Ohm impedance to make your sub amp deliver some serious juice!The CompR 12-Inch Subwoofer Enclosure works best with 500 watts of recommended power. See below for more details. Specifications TYPE: single NO. OF WOOFERS/SIZE (in, cm): (1) 12, 30 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY (dB 1w/1m): 90.8 BOX TOP DEPTH (in, cm): 11-3/8, 28.9 BOX BOTTOM DEPTH (in, cm): 14-1/2, 36.8 BOX HEIGHT (in, cm): 16, 40.6 BOX WIDTH (in, cm): 23, 58.4 Kicker CompR Subwoofer Enclosure Manual

Read more less

Dual 10-Inch Thin Subwoofer Enclosure, 400-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 10-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 10-inch subwoofer enclosure works best with 400-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY (dB 1w/1m): 96.5 BOX TOP DEPTH (in, cm): 13-1/4, 33.5 BOX BOTTOM DEPTH (in, cm): 13-1/4, 33.5 BOX HEIGHT (in, cm): 5-5/8, 14.2 BOX WIDTH (in, cm): 25-5/8, 65 Kicker TRTP Subwoofer Enclosure Manual

Read more less

10-Inch 400-Watt Loaded Thin Dual Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT 10" thin subwoofer by Kicker is a weather resistant thin sub with a 2Ω configuration with this box. The thin 10 inch sub magnet structure delivers 400W RMS of power with a chassis mounting depth of just under 3 1/2". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 10" CompRT thin subwoofer driver nice and cool.The Kicker 43TCWRT102 10" subwoofer enclosure works best with 400 watts of RMS power. Specifications TYPE: thin-profile NO. OF WOOFERS/SIZE (in, cm): 10, 25 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY (dB 1w/1m): 96.5 BOX TOP DEPTH (in, cm): 3-7/16, 8.8 BOX BOTTOM DEPTH (in, cm): 6-9/16, 16.7 BOX HEIGHT (in, cm): 11-13/16, 39 BOX WIDTH (in, cm): 23-1/4, 59.1 Kicker CompRT Subwoofer Enclosure Manual

Read more less

10-Inch Thin Loaded Subwoofer Enclosure, 500-Watts RMS, 2-Ohm or 4-Ohm Impedance Barely seven inches deep, the Kicker TL7T 10-Inch thin subwoofer enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Type single truck Woofer [in, cm] Solo-Baric L7T 10" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 85.98 Box Top Depth (in, cm): 4-3/8, 11.3 Box Bottom Depth (in, cm): 7-1/4, 18.5 Box Height (in, cm): 12, 30.4 Box Width (in, cm): 20-1/4, 51.5 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

10-Inch 500-Watt Loaded Thin Square Subwoofer Enclosure, 2-Ohm Final Impedance With this TL7R series thin 10" square sub box you get up to 20% more air movement compared to a round driver. This 500W loaded enclosure has an angled back, heavy duty internal bracing, thick MDF construction and black carpeting with a Kicker embroidered logo. This TL7R subwoofer enclosure contains a single 10 Inch square driver with an RMS power rating of 500W @ 2Ω. Specifications Type single truck Woofer [in, cm] Solo-Baric L7R 10" Impedance [Ohms] 2 Recommended Amplifier Power [watts RMS] 500 SENSITIVITY [dB 1w/1m] 88 Box Top Depth (in, cm): 6 1/2, 16.4 Box Bottom Depth (in, cm): 10, 25.4 Box Height (in, cm): 15, 38.1 Box Width (in, cm): 21 1/2, 54.6 What's in the box? one loaded enclosure with one 10-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers

Read more less

Alpine 350-Watt 10-Inch Truck Subwoofer Enclosure, 2Ω Final Impedance With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. Radial Vented VC Heat Sink & Airflow Management System actively manages voice coil temperatures by forcing air directly across the heat sink system. FEA Optimized Dual-Sided Machined CRC Motor Structure creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions. Specifications 2Ω Impedance Ported Enclosure Design Frequency Response: 28Hz-200Hz Dimensions 21-5/8" Wide x 15-1/4" Tall x 7-1/4" Deep 1x 3-15/16" Alpine SBT-S10V Manual

Read more less

8-Inch Thin Loaded Subwoofer Enclosure, 350-Watt RMS, 2-Ohm or 4-Ohm Impedance Barely six inches deep, the KICKER TL7T 8-Inch Subwoofer Enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 8" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 350 Sensitivity [dB 1w/1m] 84.835 Box Top Depth (in, cm): 3-5/8, 9.2 Box Bottom Depth (in, cm): 6-1/4, 16 Box Height (in, cm): 11-1/4, 28.5 Box Width (in, cm): 19-5/8, 50 What's in the box? one loaded enclosure with one 8-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

Dual 8-Inch Thin Subwoofer Enclosure, 300-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 8-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 8-inch subwoofer enclosure works best with 300-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 8, 20 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY (dB 1w/1m): 85.5 BOX TOP DEPTH (in, cm): 12-1/4, 31 BOX BOTTOM DEPTH (in, cm): 12-1/4, 31 BOX HEIGHT (in, cm): 5-3/8, 13.8 BOX WIDTH (in, cm): 23-5/8, 60 Kicker TRTP Subwoofer Enclosure Manual

Read more less

8-Inch 300-Watt Loaded Dual Thin Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT Thin Profile 8-Inch subwoofer enclosure comes loaded with a Reflex subwoofer and RT sub, then carpeted and loaded with a single 2Ω terminal. Covered in sleek black carpeting and built with stout MDF construction & rounded corners, these tough enclosures take plenty of power, yet fit nearly anywhere. The Kicker 43TCWRT82 enclosure works best with 300 watts of RMS power. Specifications TYPE: thin-profile NO. OF WOOFERS/SIZE (in, cm): 8, 20 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY (dB 1w/1m): 85.5 BOX TOP DEPTH (in, cm): 3 9/16, 9 BOX BOTTOM DEPTH (in, cm): 6 7/16, 16.4 BOX HEIGHT (in, cm): 11 13/16, 39 BOX WIDTH (in, cm): 19-5/16, 49 Kicker CompRT Subwoofer Enclosure Manual

Read more less

12-Inch 300-Watt Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 12" loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  This thin 2Ω or 4Ω 12-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 12, 30 Impedance (Ohms) 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 95.3 Box Top Depth (in, cm) 11 7/16, 29 Box Bottom Depth (in, cm) 14 5/8, 37.2 Box Height (in, cm) 16, 40.6 Box Width (in, cm) 17 1/2, 44.5 Kicker CompC Subwoofer Enclosure Manual

Read more less

10-Inch 300-Watt Thin Subwoofer Enclosure, 2-Ohm or 4-Ohm Final Impedance This CompC 10" thin loaded loaded sub box is custom-sized to optimize subwoofer performance. This enclosure can fit under or behind a rear seat, has heavy MDF construction, is covered in black carpet with yellow embroidery, and comes with spring loaded speaker terminals for an easy connection of your subwoofer wire.  These thin 44TCWC102 and 44TCWC104 10-inch enclosure works best with 300 watts of RMS amplified power. Specifications Subwoofer (in, cm) 10, 25 Impedance (Ohms) 2, 4 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 Sensitivity (dB 1w/1m) 93.8 Box Top Depth (in, cm) 4,10.2 Box Bottom Depth (in, cm) 7 5/8, 19.4 Box Height (in, cm) 15, 38.1 Box Width (in, cm) 21 1/2, 54.6 Kicker CompC Subwoofer Enclosure Manual

Read more less

6 3/4-Inch 150-Watt RMS Loaded Dual Thin Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT Thin Profile 6-¾-Inch subwoofer enclosure comes loaded with a Reflex subwoofer and RT sub, then carpeted and loaded with a single 2Ω terminal. Covered in sleek black carpeting and built with stout MDF construction & rounded corners, these tough enclosures take plenty of power, yet fit nearly anywhere. The Kicker 43TCWRT672 enclosure works best with 150 watts of RMS power. Specifications Woofer [in, cm] 6-¾, 165 Recommended Amplifier Power (watts RMS) 150 Peak Power (watts, per ANSI/CTA-2031-A) 300 Rated Impedance [Ω] 2 Frequency Response [Hz] 35-500 BOX TOP DEPTH (in, cm): 3-5⁄16 , 8.5 BOX BOTTOM DEPTH (in, cm): 5-11⁄16 , 14.5 BOX HEIGHT (in, cm): 10, 25.4 BOX WIDTH (in, cm): 15-¼, 38.7 Kicker CompRT Subwoofer Enclosure Manual

Read more less