Add-On Amplifier OEM Integration Line Converter with DSP for Select 2016-2022 Honda Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
HONDA
Accord
2016-2017
Accord
2018-2022
Civic / Si
2016-2019
CR-V
2017-2020
Axxess AXDSPL-HN2 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2008-2017 Acura and Honda Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
ACURA
TL
2009-2014
TSX
2009-2014
ZDX
2010-2013
HONDA
Accord
2008-2017
Civic
2009-2015
CR-V
2010-2016
CR-Z
2011-2017
Fit
2009-2017
HR-V
2016-2017
Insight
2010-2014
Odyssey
2011-2017
Pilot
2016-2016
Pilot
2009-2016
Ridgeline
2009-2017
Axxess AXDSPL-HN1 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2013-2020 Hyundai and KIA Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Blue Link®/UVO)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
HYUNDAI
Elantra
2017-2020
Elantra GT
2018-2020
Kona
2018-2020
Santa Fe
2013-2020
KIA
Cadenza
2017-2020
Forte
UVO
2017-2018
Forte
2019-2020
Niro (EV)
Non-NAV
2019-2020
Niro (Hybrid Electrical)
Non-NAV
2017-2019
Niro (Hybrid Electrical)
Non-NAV
2020-2020
Niro (Plug-In Hybrid)
Non-NAV
2018-2020
Optima
2019-2020
Rio
2018-2020
Sedona
Non-NAV
2017-2020
Sorento
Non-NAV Display
2017-2018
Sorento
2019-2020
Soul
2017-2020
Soul EV
Non-Nav
2017-2019
Soul EV
2020-2020
Sportage
2017-2020
Axxess AXDSPL-HK3 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2020-UP Ford Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
Selectable 15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear and sub
Selectable crossover slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10ms
Easy behind the radio installation with pre-wired harness
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone) compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
FORD
Bronco
2020-2023
Bronco Sport
2020-2023
E series
2021-2023
EcoSport
2020-2023
Escape
2020-2023
Expedition
non-amplified
2018-2021
Explorer
2020-2023
F-150
2021-2022
Axxess AXDSPL-FD3 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2007-2020 Mitsubishi Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
MITSUBISHI
Eclipse Cross
2018-2020
Lancer
2008-2013
Lancer / Lancer Sportback
2014-2017
Mirage / Mirage G4
2014-2015
Outlander
2007-2019
Axxess AXDSPL-MI2 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 1992-2012 Mitsubishi Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
MITSUBISHI
Diamante
1992
2004
Eclipse
1995
2012
Endeavor
2004
2011
Galant
1994
2012
Lancer
2002
2007
Mirage
1997
2002
Montero
1993
2006
Montero Sport
1997
1999
Outlander
2003
2006
Axxess AXDSPL-MI1 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2021-UP Chrysler, Dodge, Jeep and RAM Vehicles
Upgrade your sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Includes a DSP (Digital Signal Processor)
Selectable 15-band graphic EQ or 5-band parametric EQ
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear, and sub
Selectable low pass, band pass, and high pass filters
Selectable crossover slopes; 12db, 24db, 36db, 48db
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Easy installation behind the radio with a pre-wired harness
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone)
Compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Applications
CHRYSLER
Pacifica
with separate screen
2021-2022
DODGE
Durango
with separate screen
2021-2022
Voyager
2022-2022
JEEP
Compass
2022-2022
Gladiator
2024-2024
Wrangler (JL)
2024-2024
RAM
1500
RFV radio
2022-2022
2500/3500
RFA/RFL radio
2022-2022
Promaster
2022-2022
Axxess AXDSPL-CH8 Manual
Add-On Amplifier OEM Integration Interface for Select 2016-2020 Non-Amplified Chevy and GMC Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GM10 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Camaro ‡
2016-2018
Colorado ‡
2016-2018
Cruze †
2016-2018
Equinox ‡
2018-2018
Malibu †
2016-2018
Silverado 1500 LD ‡
2019-2019
Silverado 1500 ‡
2016-2018
Silverado 2500 HD/3500 HD ‡
2016-2019
Trax †
2017-2020
GMC
Acadia ‡
2017-2019
Canyon ‡
2017-2018
Sierra 1500 ‡
2016-2018
Sierra Limited ‡
2019-2019
Sierra 2500 HD/3500 HD ‡
2016-2019
† RPO IOA‡ RPO IOB
Axxess AXLOC-GMLN10 Manual
Add-On Amplifier OEM Integration Interface for Select 2006-2012 Chevy, Pontiac and Saturn Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GMLN1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVY
Cobalt
non-amplified
2007-2010
HHR
non-amplified
2006-2011
Malibu
non-amplified
2008-2012
PONTIAC
G5
non-amplified
2007-2009
G6
non-amplified
2009-2012
Solstice
non-amplified
2006-2009
SATURN
Aura
non-amplified
2007-2009
Sky
non-amplified
2007-2009
Axxess AXLOC-GMLN1 Manual
Add-On Amplifier OEM Integration Interface for Select 1985-UP Nissan, Subaru and Suzuki Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-NIS1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
NISSAN
370z
non-amplified
2009-2020
Altima
non-amplified
2007-2018
ARMADA
non-amplified
2008-2017
Cube
non-amplified
2009-2014
Frontier
non-amplified
2008-2018
Juke
non-amplified
2011-2017
Kicks
non-amplified
2018-Up*
Leaf
non-amplified
2012-2018
Maxima
non-amplified
2007-2016
Murano
non-amplified
2003-2017
Murano (Cabriolet)
non-amplified
2011-2014
NV (1500/2500/3500)
non-amplified
2012-2018
NV 200
non-amplified
2012-2018
Pathfinder
non-amplified
2013-2020
PATHFINDER
non-amplified
2010-2017
Quest
non-amplified
2011-2016
Rogue
non-amplified
2008-2018
Sentra
non-amplified
2007-2019
Titan
non-amplified
2008-2015
Titan/ Titan XD
non-amplified
2017-Up*
Versa
non-amplified
2007-2018
Versa Note
non-amplified
2014-2018
Xterra
non-amplified
2008-2014
SUBARU
Forester
non-amplified
2009-2015
Impreza
non-amplified
2008-2014
IMPREZA WRX
non-amplified
2008-2014
Legacy
non-amplified
2010-2014
Outback
non-amplified
2010-2014
WRX
non-amplified
2012-2021
XT COUPE
non-amplified
1985-1990
XV CROSSTREK
non-amplified
2013-2015
SUZUKI
Equator
non-amplified
2009-2011
Axxess AXLOC-NIS1 Manual
Add-On Amplifier OEM Integration Interface for Select 2010-2017 Chevy and GMC Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-GM44 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Avalanche
with NAV
2012-2013
Camaro
non-amplified
2010-2015
Cruze
non-amplified
2011-2015
Equinox
non-amplified
2010-2017
Express
non-amplified
2013-2015
Malibu
non-amplified
2013-2015
Sonic
non-amplified
2012-2014
Spark
non-amplified
2013-2015
Suburban
IOR
2012-2014
Tahoe
non-amplified
2012-2014
Trax
non-amplified
2015-2016
GMC
Savanna
non-amplified
2013-2015
Terrain
non-amplified
2010-2017
Yukon/XL
With Nav without amp
2012-2014
Axxess AXLOC-GM44 Manual
Add-On Amplifier OEM Integration Interface for Select 2019-UP Chevy and GMC Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.
Contents
AXLOC-GM31 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHEVEROLET
Camaro
IOR
2019-2023
Cheyenne
IOR
2019-2021
Colorado
IOR
2019-2022
Cruze
IOR
2019-2019
Equinox
IOR
2019-2022
Malibu
IOR
2019-2022
Silverado
IOR
2019-2022
Sonic
IOR
2019-2020
Spark
IOR
2019-2022
GMC
ACADIA
IOR
2020-Up*
Canyon
IOR
2019-Up*
Sierra
IOR
2019-Up*
SIERRA HD
IOR
2020-Up*
Terrain
IOR
2019-Up*
Axxess AXLOC-GM31 Manual
Add-On Amplifier OEM Integration Interface for Select 2015-UP Non-Amplified Volkswagen Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-VW2 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
VOLKSWAGEN
Beetle
2016-2019
Golf
2015-2021
Jetta
2016-2019
Passat
2016-2022
Tiguan
2016-2022
Axxess AXLOC-VW2 Manual
Add-On Amplifier OEM Integration Interface for Select 2016-UP Honda Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-HN3 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
HONDA
Civic
non-amplified
2016-2018
Civic Hatchback
non-amplified
2017-2018
CRV
non-amplified
2017-Up*
Fit
non-amplified
2018-Up*
HRV
non-amplified
2019-Up*
Insight
non-amplified
2019-Up*
Axxess AXLOC-HN3 Manual
Add-On Amplifier OEM Integration Interface for Select 2008-UP Acura and Honda Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-HN2 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
HONDA
Accord
non-amplified
2008-2012
Civic
non-amplified
2009-2015
CRV
non-amplified
2012-2016
Fit
non-amplified
2009-2017
HRV
non-amplified
2016-2018
Insight
non-amplified
2010-2014
Odyssey
non-amplified
2011-2017
Pilot
non-amplified
2009-2017
Ridgeline
non-amplified
2009-Up*
Axxess AXLOC-HN2 Manual
Add-On Amplifier OEM Integration Interface for Select 2003-2019 Ford, Lincoln, Mazda and Mercury Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-FD1 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
FORD
Crown Victoria
non-amplified
2003-2011
E-Series
non-amplified
2009-2019
Edge
non-amplified
2007-2010
Explorer
non-amplified
2006-2010
F-Series
non-amplified
2004-2016
F650/F750
non-amplified
2011-2019
Five Hundred
non-amplified
2005-2007
Flex
non-amplified
2009-2012
Focus
non-amplified
2005-2011
Freestar
non-amplified
2004-2007
Freestyle
non-amplified
2005-2007
Fusion
non-amplified
2006-2012
Mustang
non-amplified
2004-2014
Taurus
non-amplified
2008-2012
Thunderbird
non-amplified
2004-2005
Transit Connect
non-amplified
2010-2013
LINCOLN
LS
non-amplified
2003-2006
MKX
non-amplified
2007-2010
MKZ
non-amplified
2007-2009
Navigator
non-amplified
2003-2006
Towncar
non-amplified
2003-2011
Zephyr
non-amplified
2006-2006
MAZDA
Tribute
non-amplified
2008-2011
MERCURY
Grand Marquis
non-amplified
2003-2011
Mariner
non-amplified
2005-2011
Milan
non-amplified
2006-2011
Montego
non-amplified
2005-2007
Monterey
non-amplified
2004-2011
Mountainer
non-amplified
2006-2010
Sable
non-amplified
2008-2009
Axxess AXLOC-FD1 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-UP Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-CH5 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHRYSLER
200
non-amplified
2015-2017
300
non-amplified
2015-2023
Pacifica
non-amplified
2017-2020
DODGE
CHALLENGER
non-amplified
2015-2023
CHARGER
non-amplified
2015-2023
Dart
non-amplified
2013-2016
Durango
non-amplified
2014-2020
DURANGO
non-amplified
2011-2013
FIAT
500
non-amplified
2016-2019
500L
non-amplified
2014-2020
500x
non-amplified
2016-2021
JEEP
Cherokee
non-amplified
2014-Up*
COMPASS
non-amplified
2022-2023
Compass
non-amplified
2017-2021
GLADIATOR
non-amplified
2020-2023
GRAND CHEROKEE
non-amplified
2022-2023
Grand Cherokee
non-amplified
2014-2017
Renegade
non-amplified
2015-2023
WRANGLER (JL)
non-amplified
2018-2023
WRANGLER 4XE
non-amplified
2021-2022
RAM
Chasis Cab 2500-5500
non-amplified
2013-Up*
PROMASTER
non-amplified
2022-2023
PROMASTER
non-amplified
2014-2021
PROMASTER CITY
non-amplified
2015-2021
RAM TRUCK
non-amplified
2013-2021
Axxess AXLOC-CH5 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2014 Chrysler Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-CH3 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
CHRYSLER
300/300C
non-amplified
2011-2014
Axxess AXLOC-CH3 Manual
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles equipped with the Mark Levinson system are not compatible.
Lexus vehicles equipped with navigation are not compatible.
Lexus CT200h: Must be equipped with a center channel and a subwoofer
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2014-2018
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
AVALON
ALL TRIM LEVELS
—
2015-2018
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2014
CAMRY
ALL TRIM LEVELS
—
2015-2017
HIGHLANDER
ALL TRIM LEVELS
—
2014-2018
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2015
PRIUS
ALL TRIM LEVELS
—
2016-2017
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
RAV4
ALL TRIM LEVELS
—
2015-2018
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2015-2018
SIENNA
ALL TRIM LEVELS
—
2015-2017
TACOMA
ALL TRIM LEVELS
—
2014-2018
TUNDRA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014-2015
TUNDRA
ALL TRIM LEVELS
—
2016-2019
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
VENZA
ALL TRIM LEVELS
—
2015-2016
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2006-2021 Amplified Lexus and Toyota Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 and AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY04 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018-2020 Toyota Sequoia: Only compatible in models equipped with the 14 speaker system
LEXUS
CT 200H
ALL TRIM LEVELS
2011-2013
ES 350
ALL TRIM LEVELS
2007-2012
GS 350
ALL TRIM LEVELS
2007-2011
GS 450H
ALL TRIM LEVELS
2007-2011
GX 460
ALL TRIM LEVELS
2010-2013
HS 250H
ALL TRIM LEVELS
2010-2012
IS 250
ALL TRIM LEVELS
2006-2013
IS 350
ALL TRIM LEVELS
2006-2013
RX 350
ALL TRIM LEVELS
2008-2012
RX 400H
ALL TRIM LEVELS
2007-2008
RX 450H
ALL TRIM LEVELS
2012
TOYOTA
4RUNNER
ALL TRIM LEVELS
2010-2017
4RUNNER
ALL TRIM LEVELS
2019-2021
AVALON
ALL TRIM LEVELS
2011-2012
LAND CRUISER
ALL TRIM LEVELS
2008-2011
SEQUOIA
ALL TRIM LEVELS
2008-2020
SIENNA
ALL TRIM LEVELS
2011-2020
TACOMA
ALL TRIM LEVELS
2012-2017
VENZA
ALL TRIM LEVELS
2009-2016
Pac Audio APH-TY04 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2022 Amplified Toyota and Lexus Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY02 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY02 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY02 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 or AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY02 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018 Toyota Avalon: Only compatible in models with 11 speaker system
2019-2020 Toyota Avalon: Only compatible in models with the 14 speaker system
LEXUS
CT 200H
ALL TRIM LEVELS
2014-2017
ES 250
ALL TRIM LEVELS
2019-2021
ES 300H
ALL TRIM LEVELS
2013-2020
ES 350
ALL TRIM LEVELS
2013-2021
GS 350
ALL TRIM LEVELS
2013-2020
GS 450H
ALL TRIM LEVELS
2013-2018
GX 460
ALL TRIM LEVELS
2014-2017
IS 200T
ALL TRIM LEVELS
2016-2017
IS 250
ALL TRIM LEVELS
2014-2015
IS 300
ALL TRIM LEVELS
2016-2020
NX 200T
ALL TRIM LEVELS
2015-2017
NX 300
ALL TRIM LEVELS
2019-2021
NX 300H
ALL TRIM LEVELS
2015-2017
RC 200T
ALL TRIM LEVELS
2016-2017
RC 300
ALL TRIM LEVELS
2016-2020
RC 350
ALL TRIM LEVELS
2015-2020
RX 350
ALL TRIM LEVELS
2013-2021
RX 450H
ALL TRIM LEVELS
2016-2021
TOYOTA
AVALON
ALL TRIM LEVELS
2013-2020
CAMRY
ALL TRIM LEVELS
2012-2021
COROLLA
ALL TRIM LEVELS
2019-2021
HIGHLANDER
ALL TRIM LEVELS
2014-2021
LAND CRUISER
ALL TRIM LEVELS
2013-2021
PRIUS
ALL TRIM LEVELS
2012-2021
RAV4
ALL TRIM LEVELS
2013-2021
SIENNA
ALL TRIM LEVELS
2021
TUNDRA
ALL TRIM LEVELS
2007-2013
TUNDRA
ALL TRIM LEVELS
2022
Pac Audio APH-TY02 Manual
Add-On Amplifier OEM Integration Interface for Select 2005-2021 Amplified Toyota Vehicles
Easily add amplifier(s) to Toyota factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY01 speaker connection harness when adding aftermarket amplifier(s) to select Toyota vehicles. Featuring OEM quality, factory style plugs, the APH-TY01 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY01 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY01 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
TOYOTA
AVALON
ALL TRIM LEVELS
2005-2010
CAMRY
ALL TRIM LEVELS
2007-2011
COROLLA
ALL TRIM LEVELS
2009-2011
HIGHLANDER
ALL TRIM LEVELS
2008-2013
PRIUS
ALL TRIM LEVELS
2006-2011
RAV4
ALL TRIM LEVELS
2006-2011
TACOMA
ALL TRIM LEVELS
2009-2011
TACOMA
ALL TRIM LEVELS
2018-2021
TUNDRA
ALL TRIM LEVELS
2007-2021
Pac Audio APH-TY01 Manual
Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible:
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2011-2013
ES 300
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2002-2003
ES 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2013-2014
ES 330
ALL TRIM LEVELS
For AmpPRO: With Double DIN Radio
2004-2006
ES 350
ALL TRIM LEVELS
—
2007-2009
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2014
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2009-2013
GX 470
ALL TRIM LEVELS
—
2004-2009
HS 250H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
IS 250
ALL TRIM LEVELS
—
2006-2009
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS 350
ALL TRIM LEVELS
—
2006-2009
IS 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2013
IS F
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2012
LS 430
ALL TRIM LEVELS
—
2001-2006
RX 330
ALL TRIM LEVELS
—
2004-2006
RX 350
ALL TRIM LEVELS
—
2007-2009
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
RX 400H
ALL TRIM LEVELS
—
2006-2008
RX 450H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2010-2015
TOYOTA
4RUNNER
ALL TRIM LEVELS
—
2003-2013
AVALON
ALL TRIM LEVELS
—
2005-2012
AVALON
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
CAMRY
ALL TRIM LEVELS
—
2007-2011
CAMRY
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2014
COROLLA
ALL TRIM LEVELS
—
2005-2011
FJ CRUISER
ALL TRIM LEVELS
—
2011-2014
HIGHLANDER
ALL TRIM LEVELS
—
2008-2013
LAND CRUISER
ALL TRIM LEVELS
—
2008
PRIUS
ALL TRIM LEVELS
—
2004-2011
PRIUS
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2012-2015
RAV4
ALL TRIM LEVELS
—
2004-2013
RAV4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SEQUOIA
ALL TRIM LEVELS
—
2005-2012
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness
2013
SEQUOIA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2014
SIENNA
ALL TRIM LEVELS
—
2004-2014
TACOMA
ALL TRIM LEVELS
—
2005-2013
TUNDRA
ALL TRIM LEVELS
—
2005-2013
VENZA
ALL TRIM LEVELS
—
2009-2012
VENZA
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness
2013-2014
Pac Audio AP4-TY11 Manual
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's Speaker Connection Harness. Can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. APH-GM02 works with PAC AmpPRO module: AP4-GM61
Features:
Can be used for other installations requiring plug-n-play speaker wire connections
Easily add amplifiers without cutting or modifying the vehicle’s original wiring.
Provides a plug-n-play connection at the vehicle’s original amplifier location
Saves time by quickly utilizing the original speaker wires
Harness length 18"
Applications
CADILLAC
ESCALADE
ALL TRIM LEVELS
2015-2018
CHEVROLET
CAMARO
ALL TRIM LEVELS
2016-2018
COLORADO
ALL TRIM LEVELS
2015-2018
CORVETTE
ALL TRIM LEVELS
2014-2019
CRUZE
ALL TRIM LEVELS
2017-2018
EQUINOX
ALL TRIM LEVELS
2018
IMPALA
NON-CLASSIC
2014-2016
IMPALA
ALL TRIM LEVELS
2017-2019
MALIBU
NON-CLASSIC
2016
MALIBU
ALL TRIM LEVELS
2017-2018
SILVERADO
ALL TRIM LEVELS
2014-2018
SILVERADO
CLASSIC
2019
SILVERADO HD
ALL TRIM LEVELS
2015-2019
SUBURBAN
ALL TRIM LEVELS
2015-2018
TAHOE
ALL TRIM LEVELS
2015-2019
TRAVERSE
ALL TRIM LEVELS
2018-2019
GMC
ACADIA
ALL TRIM LEVELS
2018-2019
CANYON
ALL TRIM LEVELS
2015-2018
SIERRA
ALL TRIM LEVELS
2014-2018
SIERRA HD
ALL TRIM LEVELS
2015-2019
TERRAIN
ALL TRIM LEVELS
2018
YUKON
ALL TRIM LEVELS
2015-2019
YUKON XL
ALL TRIM LEVELS
2015-2019
Pac Audio APH-GM02 Manual
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Factory sound system upgrade
Time-saving design
Prevents the need for summing and audio correction devices
Reliable PAC quality
Features
Upgrade solution for factory, fixed level, data-bus controlled sound systems
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Front, rear, sub, and center channel preamp outputs (5 volt RMS)
Provides full range, flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation
Remote sub level controller INCLUDED
Optional TOSLINK optical output with APA-TOS1 (sold separately)
Includes
AmpPRO module
Harness
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-GM02 harness (sold separately)
Applications
Must have BOSE factory sound system.
Must have Infotainment system RPO code IO5 or IO6 to be compatible.
To verify the "IO" RPO code on your vehicle, check the glove compartment or spare tire well for a silver sticker with these codes. If this sticker is not present, you must scan the QR code on the GM label found in the driver's door jamb. The RPO codes will be listed in alphabetical order in either scenario.
CADILLAC
ATS
ALL TRIM LEVELS
2015
CT6
ALL TRIM LEVELS
2017
ESCALADE
ALL TRIM LEVELS
2015-2019
CHEVEROLET
CAMARO
ALL TRIM LEVELS
2016-2018
COLORADO
ALL TRIM LEVELS
2015-2018
CORVETTE
ALL TRIM LEVELS
2014-2019
CRUZE
ALL TRIM LEVELS
2017-2018
EQUINOX
ALL TRIM LEVELS
2018
IMPALA
NON-CLASSIC
2014-2016
IMPALA
ALL TRIM LEVELS
2017-2019
MALIBU
NON-CLASSIC
2016
MALIBU
ALL TRIM LEVELS
2017-2018
SILVERADO
ALL TRIM LEVELS
2014-2018
SILVERADO
CLASSIC
2019
SILVERADO HD
ALL TRIM LEVELS
2015-2019
SUBURBAN
ALL TRIM LEVELS
2015-2019
TAHOE
ALL TRIM LEVELS
2015-2019
TRAVERSE
ALL TRIM LEVELS
2018-2019
VOLT
ALL TRIM LEVELS
2016-2018
GMC
ACADIA
ALL TRIM LEVELS
2018-2019
CANYON
ALL TRIM LEVELS
2015-2018
SIERRA
ALL TRIM LEVELS
2014-2018
SIERRA HD
ALL TRIM LEVELS
2015-2019
TERRAIN
ALL TRIM LEVELS
2018
YUKON
ALL TRIM LEVELS
2015-2019
YUKON XL
ALL TRIM LEVELS
2015-2019
Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations
Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Simplifies amplifier installation in data-bus controlled factory sound systems
Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped)
Front, rear, and sub preamp outputs (5V RMS)
Plug-and-play installation with factory-matched harness
Sub level controller included
Optical output included
Applications
Vehicle must be equipped with factory B&O system to be compatible
Factory amplifier must be removed from vehicle when installing this interface
FORD
BRONCO
ALL TRIM LEVELS
2021-2023
BRONCO SPORT
ALL TRIM LEVELS
2021
ECO SPORT
ALL TRIM LEVELS
2021
EDGE
ALL TRIM LEVELS
2019-2022
ESCAPE
ALL TRIM LEVELS
2021-2022
EXPEDITION
ALL TRIM LEVELS
2018-2020
EXPLORER
ALL TRIM LEVELS
2020-2023
F-150
ALL TRIM LEVELS
2018-2023
F-250
ALL TRIM LEVELS
2020-2023
F-350
ALL TRIM LEVELS
2020-2023
F-450
ALL TRIM LEVELS
2020
LIGHTNING
ALL TRIM LEVELS
2022
MAVERICK
ALL TRIM LEVELS
2022
MUSTANG MACH E
ALL TRIM LEVELS
2021
RANGER
ALL TRIM LEVELS
2020-2023
Pac Audio AP4-FD31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-FD01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification.
FORD
F-150
ALL TRIM LEVELS
2009-2012
FLEX
ALL TRIM LEVELS
2009-2012
FUSION
ALL TRIM LEVELS
2010-2012
TAURUS
ALL TRIM LEVELS
2010-2012
LINCOLN
MKS
ALL TRIM LEVELS
2009-2012
MKT
ALL TRIM LEVELS
2010-2012
MKX
ALL TRIM LEVELS
2007-2010
MKZ
ALL TRIM LEVELS
2007-2012
NAVIGATOR
ALL TRIM LEVELS
2007-2014
Pac Audio AP4-FD11 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (Dual MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
300
ALL TRIM LEVELS
2011-2014
DODGE
CHARGER
ALL TRIM LEVELS
2011-2014
JOURNEY
ALL TRIM LEVELS
2011-2015
MASERATI
GHIBLI
ALL TRIM LEVELS
2015
QUATTROPORTE
ALL TRIM LEVELS
2014-2016
Pac Audio AP4-CH31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
TOWN & COUNTRY
ALL TRIM LEVELS
2008-2016
DODGE
CHALLENGER
ALL TRIM LEVELS
2008-2014
CHARGER
ALL TRIM LEVELS
2008-2010
DURANGO
ALL TRIM LEVELS
2009, 2011-2013
GRAND CARAVAN
ALL TRIM LEVELS
2008-2018
RAM TRUCK
ALL TRIM LEVELS
2009-2012
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
2008-2013
WRANGLER
ALL TRIM LEVELS
2007-2017
WRANGLER
JK
2018
WRANGLER UNLIMITED
ALL TRIM LEVELS
2007-2017
WRANGLER UNLIMITED
JK
2018
RAM
RAM TRUCK
ALL TRIM LEVELS
2010-2012
Pac Audio AP4-CH21 Manual
Add-On OE Amplifier-Integration Wiring-Harness for Select 2021-UP Amplified Chrysler, Dodge, Jeep and RAM Vehicles with uConnect5 Factory Audio Systems
Must be used with AP4-CH41 R.2
Plug and play solution for UConnect5 that allows you to use an AmpPRO with most Chrysler vehicles.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Must be used with AP4-CH41 R.2
Amplified Vehicles
Compatible with all data-bus controlled amplified systems, no matter the screen size. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Non-Amplified Vehicles
All other models: Only compatible in vehicles equipped with the 7” or bigger screen. Vehicles equipped with the 5” screen are not compatible.
If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4-channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly.
CHRYSLER
PACIFICA
ALL TRIM LEVELS
2021-2022
DODGE
DURANGO
ALL TRIM LEVELS
2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
RAM
RAM TRUCK
NON-CLASSIC
2022
No Manual Available
Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles
Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring.
Quickly and easily bypass the ANC Module.
Keeps ANC module on data-bus for vehicle diagnostics health
Factory fit plug-in connectors
Prevents cutting of factory wires
Applications - confirmed as of 2/1/2023
Year(s)
Make
Model
Trim Level
Additional Info
2017-2019
CHRYSLER
PACIFICA
ALL TRIM LEVELS
—
2019
DODGE
RAM TRUCK
NON-CLASSIC
—
2019
JEEP
CHEROKEE
ALL TRIM LEVELS
—
2015-2016
JEEP
GRAND CHEROKEE
ALL TRIM LEVELS
—
2019
RAM
RAM TRUCK
NON-CLASSIC
—
Pac Audio ANC-CH01 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2020 Amplified Alfa-Romeo, Chrysler, Dodge, Fiat, Jeep, Maserati, RAM and Volkswagen Vehicles
Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's speaker connection harnesses. This adapter can easily add amplifiers with no need to cut or modify a vehicle’s original wiring.
Features:
Works with PAC AmpPRO: AP4-CH21, AP4-CH31, and AP4-CH41
Can use it for other installations requiring plug-n-play speaker wire connections
Easily add amplifiers without cutting or modifying the vehicle’s original wiring.
Provides a plug-n-play connection at the vehicle’s original amplifier location
Saves time by quickly utilizing the original speaker wires
Harness length 18 inches
Applications
ALFA ROMEO
4C
ALL TRIM LEVELS
2018-2020
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2012-2019
TOWN & COUNTRY
ALL TRIM LEVELS
2008-2016
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2020
CHARGER
ALL TRIM LEVELS
2012-2020
DART
ALL TRIM LEVELS
2013-2016
DURANGO
ALL TRIM LEVELS
2011-2020
GRAND CARAVAN
ALL TRIM LEVELS
2008-2020
JOURNEY
ALL TRIM LEVELS
2009-2020
NITRO
ALL TRIM LEVELS
2007-2011
RAM TRUCK
ALL TRIM LEVELS
2010-2018
FIAT
500
ALL TRIM LEVELS
2014-2019
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2020
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2017
LIBERTY
ALL TRIM LEVELS
2008-2012
WRANGLER
ALL TRIM LEVELS
2008-2017
WRANGLER
JK
2018
WRANGLER UNLIMITED
ALL TRIM LEVELS
2008-2017
WRANGLER UNLIMITED
JK
2018
RAM
RAM TRUCK
ALL TRIM LEVELS
2010-2015
VOLKSWAGEN
ROUTAN
ALL TRIM LEVELS
2010-2014
Pac Audio APH-CH01 Manual
Add-On Fiber Optic Output for Select Pac-Audio AmpPro Interfaces
The APA-TOS1 is a fiber-optic audio output add-on accessory for use with an AmpPRO interface. The APA-TOS1 easily installs in your AmpPRO interface and instantly provides a digital Toslink output.
APA-TOS1 is compatible with any brand and length of Toslink cable for connection into a Toslink equipped DSP, or amplifier.
Benefits
APA-TOS1 provides a pure digital output for aftermarket amplifier and/or DSP installationDigital audio signals are less susceptible to noise/hiss or interference
Features
Quick and easy installation into any AmpPRO interfaceProvides digital fiber-optic variable audio signal outputCompatible with Toslink equipped DSPs or amplifiers
NOTE: Toslink cable is not included
Pac Audio AP4-TOS1 Manual
Head-Unit Replacement Antenna-Adapter Female-Cable for Select 2005-2013 Subaru Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector on one end and a male Subaru-style antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector on one end
Male Subaru-style antenna connector on the other end
Applications
SUBARU
Forester
2009-2013
Impreza
2008-2011
Impreza Outback Sport
2011-2011
Impreza WRX STI
2008-2012
Legacy
2005-2012
Outback
2005-2012
Tribeca
2008-2012
Stereo-Replacement Antenna Adapter Set for Select 1987-2006 Infiniti and Nissan Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and a Nissan-style antenna connector on the other
Cable #2 has a female Motorola™ connector on one end and a Nissan-style antenna connector on the other
Retains diversity functions
Applications
INFINITI
FX35, FX45
2003-2008
G35
2003-2007
G20
1991-2002
I35
2002-2004
I30
1996-2001
J30
1993-1997
M45
2003-2004
M30
1990-1992
Q45
1990-2005
QX4
1997-2003
QX56
2004-2007
NISSAN
200SX
1995-1998
240SX
1989-1998
300ZX
1990-1996
Altima
1993-2001
Maxima
1987-2006
Murano
2003-2007
Pathfinder
1987-2012
Quest
1993-2006
Stereo-Replacement Female Antenna Adapter for Select 1987-2006 Infiniti and Nissan Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original Nissan Diversity radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s original factory radio with a female Motorola™ connector on one end and a Nissan-style antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s factory Diversity radio with a 2-pin connector to use with an aftermarket antenna
Retains Diversity functions
Female Motorola™ connector on one end
Nissan-style antenna connector on the other end
Applications
INFINITI
FX35, FX45
2003-2008
G35
2003-2007
G20
1991-2002
I35
2002-2004
I30
1996-2001
J30
1993-1997
M45
2003-2004
M30
1990-1992
Q45
1990-2005
QX4
1997-2003
QX56
2004-2007
NISSAN
200SX
1995-1998
240SX
1989-1998
300ZX
1990-1996
Altima
1993-2001
Maxima
1987-2006
Murano
2003-2007
Pathfinder
1987-2012
Quest
1993-2006
Stereo-Replacement Antenna Female Adapter for Select 2007-UP Acura, Chevy, Infiniti, Nissan and Suzuki Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector and a blue wire lead on one end and a male antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector and a blue wire lead on one end
Male Nissan-style antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead
Applications
ACURA
RL
2005-2012
CHEVY
City Express
2015-2018
INFINITI
EX35
2008-2011
FX35, FX50
2009-2013
G37
2008-2013
G35
2007-2008
G25
2011-2012
JX35
2013
M37, M56
2011-2013
M35, M45
2006-2010
Q70, Q70L
2015-2019
Q60
2014-2020
Q50
2015-2020
Q40
2015-2015
QX80
2015-2019
QX70
2014-2018
QX60
2014-2020
QX56
2008-2012
QX50
2015-2017
QX30
2017-2019
NISSAN
370Z
2009-2020
Altima
2007-2020
Armada
2008-2020
Cube
2009-2014
Frontier
2008-2021
GT-R
2009-2020
Juke
2011-2017
Kicks
2018-2021
LEAF
2012-2020
Maxima
2007-2020
Murano
2009-2019
NP 300
2017-2018
NV
2012-2021
NV200
2013-2021
Pathfinder
2008-2020
Quest
2011-2016
Rogue
2008-2020
Rogue Select
2014-2015
Rogue Sport
2017-2020
Sentra
2007-2021
Titan
2008-2019
Titan XD
2016-2019
Versa
2007-2022
Versa Note
2014-2019
Xterra
2008.5-2015
SUZUKI
Equator
2009-2011
Head-Unit Replacement Antenna-Adapter Male/Female Set for Select 2007-UP Acura, Chevy, Infiniti, Nissan and Suzuki Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector and a blue wire lead on one end and a Nissan-style antenna connector on the other
Cable #2 has a female Motorola™ connector and a blue wire lead on one end and a Nissan-style antenna connector on the other
Applications
ACURA
RL
2005-2012
CHEVY
City Express
2015-2018
INFINITI
EX35
2008-2011
FX35, FX50
2009-2013
G37
2008-2013
G35
2007-2008
G25
2011-2012
JX35
2013
M37, M56
2011-2013
M35, M45
2006-2010
Q70, Q70L
2015-2019
Q60
2014-2020
Q50
2015-2020
Q40
2015-2015
QX80
2015-2019
QX70
2014-2018
QX60
2014-2020
QX56
2008-2012
QX50
2015-2017
QX30
2017-2019
NISSAN
370Z
2009-2020
Altima
2007-2020
Armada
2008-2020
Cube
2009-2014
Frontier
2008-2021
GT-R
2009-2020
Juke
2011-2017
Kicks
2018-2021
LEAF
2012-2020
Maxima
2007-2020
Murano
2009-2019
NP 300
2017-2018
NV
2012-2021
NV200
2013-2021
Pathfinder
2008-2020
Quest
2011-2016
Rogue
2008-2020
Rogue Select
2014-2015
Rogue Sport
2017-2020
Sentra
2007-2021
Titan
2008-2019
Titan XD
2016-2019
Versa
2007-2022
Versa Note
2014-2019
Xterra
2008.5-2015
SUZUKI
Equator
2009-2011
Head-Unit Replacement Antenna-Adapter Male/Female Cable Set for Select 2006-UP Lexus, Scion, Subaru, and Toyota Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector and a blue wire lead on one end and a female Molex connector on the other
Cable #2 has a female Motorola™ connector and a blue wire lead on one end and a male antenna connector on the other
A blue wire is attached to the adapter that connects to the antenna turn-on lead of the radio
Applications
LEXUS
CT 200h
2011-2017
ES Series
2019-2020
ES 300h, ES 350
2013-2018
GS Series
2013-2020
GS 350, GS 450h, GS 460
2010-2011
GX 460
2010-2020
HS 250h
2010-2012
IS Series
2014-2020
IS 250C, IS 350C, IS F
2006-2015
IS 250, IS 350
2006-2013
LC Series
2018-2020
LFA
2012-2012
LS Series
2013-2020
LS 460
2010-2012
LS 600h L
2010-2016
LX 570
2010-2020
NX Series
2015-2020
RC Series
2013-2020
RX Series
2016-2020
RX 350, RX 450h
2010-2015
UX Series
2019-2020
SCION
FRS
2013-2016
iM
2016
tC
2014-2015
SUBARU
Ascent
2019-2022
BRZ
2013-2022
Crosstrek
2016-2023
Forester
2014-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX STI
2016-2021
WRX
2015-2021
XV Crosstrek
2013-2015
TOYOTA
4Runner
2014-2023
86
2017-2020
Avalon
2013-2020
C-HR
2018-2022
Camry
2012-2022
Corolla
2012-2023
Corolla Hatchback
2019-2023
Corolla iM
2017-2018
FJ Cruiser
2011-2014
Highlander
2013-2023
Land Cruiser
2010-2020
Matrix
2013-2014
Mirai
2016-2019
Prius
2012-2020
Prius Plug-In (PHV)
2012-2015
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4
2019-2020
RAV4 (non-EV)
2013.5-2018
RAV4 (non-EV)
2013-2013.5
RAV4
2012
Sequoia
2013-2022
Sienna
2015-2020
Tacoma
2012-2023
Tundra
2014-2021
Venza
2013-2015
Yaris
2018
Yaris
2012-2017
Head-Unit Replacement Antenna-Adapter for Select 1988-2008 GM Vehicles
If you are adding an external device with a built-in FM modulator in your vehicle, these antenna cable adapters ensure that you can continue to use your factory radio and antenna. These are simple yet necessary cables that adapt the vehicle’s original factory radio and antenna connectors to plug into the FM modulator.
Antenna adapter kit
Used to adapt the vehicle’s original factory radio and antenna connectors to use with an FM modulator
Cable #1 has a male Motorola™ connector on one end and a female connector for a mini “barbed” plug on the other
Cable #2 has a female Motorola™ connector on one end and a male Motorola™ connector on the other
Applications
BUICK
Century
1988-2005
Electra
1988-1990
LaCrosse (aka Allure in Canada)
2005-2009
LeSabre
1988-1999
Park Avenue
1988-2005
Rainier
2004-2007
Reatta
1988-1991
Regal
1988-2004
Rendezvous
2002-2007
Riviera
1986-1999
Roadmaster
1991-1996
Skylark
1987-1998
Skyhawk
1988-1989
Terraza
2005-2007
CADILLAC
Brougham
1987-1992
Catera
1997-2001
Coupe DeVille
1988-1993
DeVille
1988-2005
Eldorado
1988-2002
Escalade ESV
2003-2006
Escalade EXT
2002-2006
Escalade
1999-2006
Fleetwood
1988-1996
Fleetwood Brougham
1990-1992
Seville
1988-2004
STS
2005-2011
CHEVY
Astro Van
1985-2005
Avalanche
2002-2006
Beretta
1988-1996
C/K Pickup
1995-2000
Camaro
1990-2002
Caprice
1991-1996
Cavalier
1988-2005
Celebrity
1990-1990
Classic (a.k.a. Malibu)
2004-2005
Cobalt
2005-2006
Colorado
2004-2012
Corsica
1988-1996
Corvette
1990-2013
Equinox
2005-2006
Express
1996-2007
G-Series Van
1988-1996
Impala
1994-2005
Kodiak C4500-8500
2003-2009
Lumina
1990-2001
Lumina APV
1990-1996
Malibu
1997-2007
Malibu Classic
2008
Classic (a.k.a. Malibu Classic)
2004-2005
Malibu Maxx
2004-2007
Monte Carlo
1995-2005
S-10 Blazer
1988-2005
S-10 Pickup
1989-2004
Silverado Classic
2007
Silverado
2003-2006
Silverado 1500, 2500
1999-2002
Silverado 3500
2001-2002
SSR
2003-2006
Suburban
1988-2006
Tahoe
1995-2006
Tracker
1998-2004
Trailblazer
2002-2009
Uplander
2005-2008
Venture
1997-2005
GMC
Canyon
2004-2012
Envoy
1998-2009
G-Series Van
1988-1996
Jimmy (a.k.a. Jimmy Envoy)
1998-2001
Jimmy
1988-1997
Safari
1985-2005
Savana
1996-2007
Sierra Classic
2007
Sierra
2003-2006
Sierra 1500
1999-2002
Sierra 2500
1999-2002
Sierra 2500 HD
2000-2002
Sierra 3500
2001-2002
C/K Pickup
1995-1998
Sonoma
1998-2004
S-15 Sonoma
1986-1997
Suburban
1988-1999
Topkick C4500-8500
2003-2009
Yukon XL
2000-2006
Yukon
1995-2006
Yukon XL Denali
2001-2006
Yukon Denali
1999-2006
HUMMER
H2
2003-2007
H3
2006-2010
HYUNDAI
Santa Fe
2003-2006
ISUZU
Ascender
2003-2008
Hombre
1998-2001
I-290, I-370
2007-2008
I-280, I-350
2006-2006
KIA
Sorento
2003-2006
OLDSMOBILE
Achieva
1992-1998
Alero
1999-2004
Aurora
1995-2000
Bravada
1991-2004
Cutlass
1997-1999
Cutlass Calais
1988-1991
Cutlass Ciera
1988-1996
Cutlass Supreme
1988-1997
Eighty-Eight
1988-1999
Intrigue
1998-2002
LSS
1996-1999
Ninety-Eight
1988-1996
Regency
1997-1998
Silhouette
1997-1999
Silhouette APV
1990-1996
Touring Sedan
1988-1990
Toronado
1983-1993
PONTIAC
6000
1986-1991
Aztec
2001-2005
Bonneville
1992-1999
Bonneville Safari Wagon
1987-1989
Firebird, Firebird Trans Am
1988-2002
G6
2005-2009
Grand Am
1988-2005
Grand Prix
1988-2008
Lemans
1988-1993
Montana
1999-2005
Montana SV6
2005-2007
Sunbird
1988-1994
Sunfire
1995-2005
Torrent
2006
TransSport
1997-1999
TransSport APV
1990-1996
Vibe
2003-2008
SAAB
9-7x
2005-2009
SATURN
Relay
2005-2007
S Series
1991-1999
TOYOTA
Matrix
2003-2008
Fuse-Holder Mounting Bracket for Under-The-Hood Locations in Select 2007-2018 Jeep Wrangler-JK Vehicles
The SBA-J-JK-FHB Fuse Holder Bracket easily and securely mounts up to two JL Audio XB-MFBU-ANL Master Fuse Blocks (sold separately). Attaches to the firewall of your 2-door or 4-door Wrangler using factory hardware (no drilling required). Powder-coated steel, engineered and built in USA.
JL Audio SBA-J-JK-FHB Installation Manual
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2007-2017 Jeep Wrangler-JK Vehicles
The SBA-J-JKU-UAR Universal Amplifier Rack fits under either front seat of your 4-door Wrangler to securely mount one of several different JL Audio amplifier models (sold separately). Installs using factory hardware and requires no drilled holes. Powder-coated steel, engineered and built in USA.
Will not fit 2-Door models.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions
JL Audio SBA-J-JKU-UAR Installation Manual
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2007-UP Chrysler, Dodge, Jeep, Mitsubishi and Volkswagen Vehicles
iDatalink Maestro RR and RR2 compatible radio replacement harness for select Mopar vehicles 2007 and up, and also Mitsubishi and Volkswagen. The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections. For back-up camera and rear seat entertainment the AVCH1 is also required. Please see vehicle fit guide for more information on this solution.
Click Here to View Vehicle Compatibility - confirmed through 2020
Factory Backup-Camera to Aftermarket Head-Unit Wiring Harness for Select 2012-2015 Toyota, Scion and Subaru Vehicles
The CAM-TY11 is a reverse camera T-harness that gives the ability to add a reverse camera input for Toyota and select Scion and Subaru 6.1” touchscreen radios. The harness is Plug-and-Play with no need to connect to reverse lamps for the reverse trigger.
Applications
SCION
FRS
2013-2015
IQ
2013-2015
TC
2014-2015
XB
2013-2015
XD
2013-2014
SUBARU
BRZ
2013-2015
TOYOTA
4RUNNER
2012-2014
AVALON
2012-2014
CAMRY
2012-2014
COROLLA
2013
HIGHLANDER
2012-2014
PRIUS
2012-2015
PRIUS V
2012-2014
RAV4
2012-2014
SEQUOIA
2013
TACOMA
2012-2013
VENZA
2012-2014
