Amplified Head-Unit Replacement Wiring Interface-Harness for Select 2002-2010 Chrysler and Dodge Vehicles
The CHTO-02 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in amplified 2002-2004 Dodge Ram, 2004-2008 Chrysler Pacifica and retain the use of the OEM amplified audio system.
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Designed for amplified systems
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired ASWC-1 harness (ASWC-1 sold separately)
Adjustable gain control for overall volume
High level speaker input
Retains balance and fade
Micro-B USB updatable
Applications
CHRYSLER
Pacifica
2004-2008
DODGE
Ram Pickup 1500
2002-2004
Ram Pickup 2500, 3500
2003-2004
Viper
2008-2010
Axxess Interface CHTO-02 Manual - new part#AXTO-CH2
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2003-2011 Mercedes CLS, E and SLK Class Vehicles
Provides accessory power
Designed for amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains balance
Micro B USB updatable
Amplified Applications
MERCEDES
CLS-Class
2006-2011
E-Class
2003-2008
Axxess Interface AXDIS-MB132 Installation ManualAxxess Interface AXDIS-MB132 Can Hub Tech Tip
Aftermarket Stereo-Replacement Wiring-Harness for Select Factory Amplified and Non-Amplified 2013-2023 Chrysler, Dodge, Fiat, Jeep, and RAM Vehicles
The AXTC data interface not only provides everything you will need to retain certain features of your vehicle that are normally lost when replacing your factory radio, it also has our patented built-in steering wheel control technology combined with our patented auto-detect feature that automatically detects the vehicle type, radio connection, and preset controls while allowing the ability to dual-assign steering wheel controls. The AXTC provides NAV outputs, accessory power, and a 12-volt illumination output, in addition to retaining R.A.P., balance and fade. This series is designed to work with all major radio brands and offers solutions for amplified and non-amplified audio systems. In addition to auto-detect, this series can be manually programmed for most vehicles and will retain settings even after battery disconnection or interface removal. Details of what features your vehicle-specific package offers can be found listed in this section. Check our Vehicle Fit Guide to see if an AXTC package is available for your vehicle as these products are dependent on vehicle application.
Applications
CHRYSLER
200
w/small screen
2015-2016
DODGE
Dart
w/small screen
2013-2016
Dart
w/o 8.4-inch screen
2013-2016
FIAT
500
2015-2015
500L
2014-2014
500X
2016-2016
JEEP
Cherokee
Sport
2014-2016
RAM
1500/2500/3500 Classic
w/small screen
2019-2023
1500/2500/3500
w/small screen
2013-2018
2500/3500
w/small screen
2019-2023
Axxess AXTC-CH5 Installation Manual
Add-On Amplifier OEM Integration Interface for Select 2019-UP Amplified Chevy and GMC Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Retains GM Super Cruise feature
Factory amplifier must be removed from vehicle when installing this interface
Features
Upgrade solution for factory, fixed level, data-bus controlled sound systems
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
Front, rear, sub, and center channel preamp outputs (5 volt RMS)
Provides full range, flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation
Remote sub level controller INCLUDED
Optional TOSLINK optical output with APA-TOS1 (sold separately)
Includes
AmpPRO module
Harness
Bass knob
Knob harness
Manual
Applications
CADILLAC
CT5
With Bose
2020-2024
CHEVROLET
Blazer
With Bose
2019-2025
Camaro
With Bose
2019-2024
Colorado
With Bose
2019-2022
Silverado 1500
New model, With Bose
2019
Silverado 1500
With Bose
2020-2025
Silverado 2500/3500HD
With Bose
2021-2025
Suburban
With Bose
2021-2024
Tahoe
With Bose
2021-2024
Traverse
With Bose
2020-2023
GMC
Acadia
With Bose
2020-2023
Canyon
With Bose
2019-2022
Sierra 1500
With Bose
2019-2025
Sierra 2500/3500 HD
With Bose
2021-2025
Yukon
With Bose
2021-2024
Yukon XL
With Bose
2021-2024
Pac Audio AP4-GM71 Manual
Factory Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2014-2022 Jeep and RAM Vehicles
This vehicle-specific interface is designed for use when installing an aftermarket radio. It retains R.A.P. (Retained Accessory Power) and provides 12-volt 10-amp accessory power and NAV output for parking brake, reverse, and speed sense. This interface features easy plug-n-play connectivity and a pre-wired harness is included for the AXSWC, which is sold separately.
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (Retained Accessory Power)
Provides wires for multimedia radios (park brake, reverse, speed sense)
Pre-wired AXSWC harness (AXSWC sold separately)
Retains the factory backup camera (Not retained on Wrangler JL or Gladiator)
Retains balance and fade
Retains the factory AUX-IN jack
Designed for amplified and non-amplified systems
Allows retention and adjustment of the Personalization Options
Adjust Personalization Options through a wireless application
Smartphone application offering full control from either Android or Apple mobile devices
Micro-B USB updatable
Non-Amplified Applications
JEEP
Gladiator
2020-UP
Renegade
Sport, Upland w/ Base radio
2018-2020
Renegade
Sport
2015-2017
Renegade
All but Sport
2015-2017
Renegade Sport
2018
Wrangler JL
Base Model
2018
RAM
ProMaster
w/ 5-inch display (Uconnect 5.0)
2014-2021
ProMaster
w/ 3-inch display (Uconnect 3.0)
2016-2018
ProMaster City
2015-2022
Axxess Interface AXDI-6524 Manual
Amplified and Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2002-2015 Audi Vehicles
This vehicle-specific interface is designed for use when installing an aftermarket radio. It retains R.A.P. (Retained Accessory Power) and provides 12-volt 10-amp accessory power and NAV output for parking brake, reverse, and speed sense. This interface features easy plug-n-play connectivity and a pre-wired harness is included for the AXSWC, which is sold separately.
Features:
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (Retained Accessory Power)
Provides wires for multimedia radios (park brake, reverse, speed sense)
Prewired AXSWC harness (AXSWC sold separately)
Retains balance and fade
Micro-B USB updatable
Interface Components:
AXDI-AI2 interface
LD-AX-XSVI-AU1 harness
LD-AX-XSVI-AU2 harness
Amplified and Non-Amplified Applications
AUDI
A3
w/ Concert radio
2006-2007
A3
2006-2007
A3
w/ Symphony Plus radio
2006-2007
A3
w/ Symphony radio
2006-2007
A3
2008-2013
A4, RS 4, S4
2007-2008
A4, RS 4, S4
2005-2008
A4, S4
w/ Symphony radio
2002-2005
A4, S4
w/ Symphony Plus radio
2006-2006
A4, S4
w/ Symphony radio
2006-2006
A4, S4
convertible
2009-2009
A6, RS 6, S6
2002-2004
allroad quattro
2004-2005
TT
2002-2006
TT, TTS
2008-2015
Axxess Interface AXVI-9004 Manual
Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2005-2009 Land Rover LR3 and Range-Rover-Sport Vehicles
Interface Features:
Designed for MOST*25 amplified systems
Provides accessory power (12-volt)
Retains audio controls on the steering wheel controls
Easy to set Dipswitches for SWC configuration
Provides NAV outputs (parking brake, reverse, and speed sense)
Micro B USB updatable
Note: Backup Camera not retained if equipped.
Interface Components:
AXDIS-LR92 harness
AXDIS-LR92 interface
SWC harness
Fiber cap
Amplified Applications
LAND ROVER
LR3
M.O.S.T. 25 amplified
2005-2009
Range Rover Sport
M.O.S.T. 25 amplified
2006-2009
Axxess Interface AXDIS-LR92 Manual
DDIN-Size Head-Unit Replacement Dash-Kit for Select 2013-2014 Ford F-Series Pickups with Factory 4.2" Radio Screen
Dash kit and T-harness solution for 2013-2014 Ford F150 with the 4.3 inch “MyFord” radio. Features factory grade fit & finish and adds a convenient storage pocket with flush mounted ports to connect to the aftermarket radio. Includes T-harness, radio panel, steel radio brackets and USB adapter. Maestro RR and iDatalink-compatible aftermarket radio are required and sold separately.
Applications
FORD
F-150
w/ 4.2-inch color screen
2013-2014
Factory OEM Amplifier Bypass for Select 2006-2015 Toyota Vehicles
Allows the factory amplifier to be bypassed without altering the factory wiring
20 gauge wires
Length – 12 inches
Applications
TOYOTA
Land Cruiser
2008
2015
W/O NAV
Tundra
2006
2006
Axxess AXABH-TY3 Manual
Factory OEM Amplifier Bypass Wiring Harness for Select 2015-2019 Fiat and Jeep Vehicles
Allow the factory amplifier to be bypassed without altering the factory wiring.
20 gauge wires
Length – 12 inches
Applications
FIAT
500X
2015-2017
JEEP
Renegade
2015-2019
Axxess AXABH-CH3 Brochure
Factory OEM Amplifier Bypass for Select 2006-2009 Lexus Vehicles
Allows the factory amplifier to be bypassed without altering the factory wiring
20 gauge wires
Length – 12 inches
Applications
LEXUS
IS Series
2006-2009
Axxess AXABH-LX2 Manual
Factory OEM Amplifier Bypass Wiring Harness for Select 2011-UP Ford (works with Sony Compatible Systems)
Amplifier bypass harness
Vehicle-specific harness to bypass the factory amplifier
Allows loose wires to wire to an aftermarket amplifier
Saves the installer unnecessary labor and wire
Applications
FORD
Edge
Sony or Non-amplified
2011-2018
Escape
2015-2019
Expedition
Sony or Non-amplified
2015-2017
Explorer
Sony or Non-amplified
2011-2019
F-150
Sony or Non-amplified
2014-2016
Flex
2013-2019
Focus
2012-2019
Fusion
2013-2020
Super Duty
Sony or Non-amplified
2019-2020
Taurus
2013-2019
Axxess AXABH-FD1 Brochure
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2013-2021 Amplified and Non-Amplified RAM Pickups
Compatible with all OEM radio options including base, 5-inch, and 8.4-inch infotainment systems
RadioPRO Advanced fully integrated RAM kit for Stinger’s HEIGH10* infotainment system. The kit enables you to replace a RAM factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your RAM Truck stereo system!
*UN1810/HEIGH10 sold separately
Flush-mounted plastics for a seamless OEM experience. Includes plastics for all OEM radio options.View and adjust vehicle information through customized screens:
Complete climate controls
Real-time performance gauges
Tire pressures, door status, engine status, and other vehicle information
Access to over 70+ customizable vehicle settings (when equipped)
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory matched mounting dash kits for HEIGH10 (sold separately)
CH4A-SRK RadioPRO Advanced vehicle integration module
PAC-Link adapter for Stinger multimedia units
High-definition factory camera retention module
Vehicle specific plug-n-play wire harness
Satellite antenna adapter
AM/FM antenna adapter
USB retention cables
External chime speaker
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2013-2018
DODGE
RAM TRUCK
ALL TRIM LEVELS
—
2019-2021
DODGE
RAM TRUCK
CLASSIC
—
2013-2018
RAM
RAM TRUCK
ALL TRIM LEVELS
—
2019-2021
RAM
RAM TRUCK
CLASSIC
—
Pac Audio SRK-RAM13H Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2018-UP Amplified and Non-Amplified Wrangler-JL and Gladiator-JT Vehicles
RadioPRO Advanced fully integrated Jeep kit for Stinger’s HEIGH10 multimedia head unit. SRK-JW18EH enables you to replace a Jeep Wrangler or Gladiator factory radio with a show-stopping HEIGH10 while retaining factory features and adding even more upgraded features!
*UN1810/HEIGH10 sold separately
Dash kit and mounting hardware included for a beautiful factory look with either the HEIGH10* Stinger multimedia head unit
Enables interactive on-screen climate controls, vehicle settings, & customizable vehicle performance apps
Provides more control over your installation with RadioPRO Advanced controlled camera triggers, steering wheel controls, and factory amplifier control
All factory cameras in full high-definition
Dual-zone and Manual factory climate control (please check Compatibility Notes tab)
Factory amplifier
Factory USB ports
Safety group chimes, including ParkSense®
Steering wheel controls
Auxiliary switch panel settings
Heated seats / heated steering wheel
On-screen vehicle settings menu
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-matched mounting dash kits for HEIGH10
RadioPRO Advanced vehicle integration module
PAC-Link adapter for Stinger multimedia units
High-definition factory camera retention module
Vehicle-specific plug-n-play wire harness
Satellite antenna adapter
AM/FM antenna adapter
USB retention cables
External chime speaker
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2020-2022
JEEP
GLADIATOR
ALL TRIM LEVELS
—
2018-2022
JEEP
WRANGLER
JL
—
2018-2022
JEEP
WRANGLER UNLIMITED
JL
—
Pac Audio SRK-JW18EH Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2015-2021 Amplified and Non-Amplified Dodge and Chrysler Vehicles
RadioPRO Advanced fully integrated kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace your car's factory radio with a show-stopping HEIGH10 multimedia display, while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your car's stereo system!
*Not compatible with SRT or Hellcat Models
*UN1810/HEIGH10 sold separately
Flush-mounted plastics for a seamless OEM experience. Includes plastics for all OEM radio options.View and adjust vehicle information through customized screens:
Complete climate controls
Real-time performance gauges
Tire pressures, door status, engine status, and other vehicle information
Access to over 70+ customizable vehicle settings (when equipped)
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory matched mounting dash kits for HEIGH10 (sold separately)
CH4A-SRK RadioPRO Advanced vehicle integration module
PAC-Link adapter for Stinger multimedia units
High-definition factory camera retention module
Vehicle specific plug-n-play wire harness
Satellite antenna adapter
AM/FM antenna adapter
USB retention cables
External chime speaker
PERFORMANCE CONSOLE
Speed
RPM
Current/Best 0-60-mph time
Current/Best 60-0-mph brake
distance
Current/best ¼ mile time
VEHICLE GAUGES
Eight gauges on screen, save up to 2 presets
Battery voltage
Oil temperature
Oil pressure
Transmission temperature
Coolant temperature
and many more functions
VEHICLE INFORMATION SCREEN
Tire pressure with custom pressure threshold
Current vehicle status - including door open/closed
View and clear check engine status
CLIMATE CONTROL SCREEN
On-screen climate control retained
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2015-2021
CHRYSLER
300
ALL TRIM LEVELS
—
2015-2021
DODGE
CHALLENGER
ALL TRIM LEVELS
—
2015-2021
DODGE
CHARGER
ALL TRIM LEVELS
—
Pac Audio SRK-CHR15H Installer GuidePac-Audio SRK-CHR15H Charger Installation ManualPac-Audio SRK-CHR15H Challenger Installation ManualPac-Audio SRK-CHR15H Chrysler-300 Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2011-2018 Amplified and Non-Amplified Wrangler Vehicles
RadioPRO Jeep kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Jeep Wrangler JK factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your Jeep's stereo system!
*UN1810/HEIGH10 sold separately
Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included).
Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped)
Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals
Dual USB connection ports
Complete plug-and-play system: no vehicle modifications needed!
Flush-mounted plastics for a seamless OEM experience
FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING
The rugged mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips, and potholes that are on your trail.
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-Matched Radio Mounting Panels for HEIGH10
RP4-CH11 RadioPRO for Jeep Vehicles
Complete Plug-N-Play Installation Harnesses
Dash-Mount Dual USB Cable
Antenna Adapters for Satellite and AM/FM Radio
*HEIGH10 sold separately
**Not compatible with Panoramic View Monitor (PVM) camera vehicles
Due to continual development, features and specifications are subject to change.
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2011-2017
JEEP
WRANGLER
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER
JK
—
2011-2017
JEEP
WRANGLER UNLIMITED
ALL TRIM LEVELS
—
2018
JEEP
WRANGLER UNLIMITED
JK
—
Pac Audio SR-JK11H Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2016-2021 Amplified and Non-Amplified Toyota Tacoma Vehicles
RadioPRO Tacoma kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Tacoma factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your truck's stereo system!
*UN1810/HEIGH10 sold separately
Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included).
Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped)
Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals
Complete plug-n-play system: no vehicle modifications needed!
Flush-mounted plastics for a seamless OEM experience
FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING
The secure mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips while towing or carrying anything in your truck bed.
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-Matched Radio Mounting Panels for HEIGH10
RP4.2-TY11 RadioPro for Toyota Vehicles
Complete Plug-N-Play Installation Harnesses
Adapters for AM/FM, GPS, USB, and Sirius XM (SXV Module Required)
**Not compatible with Panoramic View Monitor (PVM) camera vehicles
Due to continual development, features and specifications are subject to change.
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2016-2021
TOYOTA
TACOMA
ALL TRIM LEVELS
—
Pac Audio SR-TAC16H Installation Manual
Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2014-2021 Amplified and Non-Amplified Toyota Tundra Vehicles
RadioPRO Tundra kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Tundra factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your truck's stereo system!
*UN1810/HEIGH10 sold separately
Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included).
Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped)
Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals
Complete plug-n-play system: no vehicle modifications needed!
Flush-mounted plastics for a seamless OEM experience
FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING
The secure mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips while towing or carrying anything in your truck bed.
KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:
Factory-Matched Radio Mounting Panels for HEIGH10
RP4.2-TY11 RadioPro for Toyota Vehicles
Complete Plug-N-Play Installation Harnesses
Adapters for AM/FM, GPS, USB, and Sirius XM (SXV Module Required)
Applications - confirmed as of 2/10/2023
Year(s)
Make
Model
Trim Level
Additional Info
2014-2021
TOYOTA
TUNDRA
ALL TRIM LEVELS
—
Pac Audio SR-TUN14H Installation Manual
Amplifier Add-On OEM Line-Converter & T-Harness for Select 2013-2020 SPDIF-Amplified Hyundai and KIA Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for S/PDIF amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Blue Link®/UVO) with adjustable level
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Retains the ability to work with S/PDIF digitally controlled amplified systems
Factory amplifier does NOT need to be retained
Wiring to be completed at the amplifier location
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
HYUNDAI
Elantra
Amplified
2017-2020
Elantra GT
Amplified
2018-2020
Kona
Amplified
2018-2020
Santa Fe
Amplified
2013-2020
KIA
Cadenza
Amplified
2017-2020
Forte
Amplified
2019-2020
Niro (EV)
Navigation
2019-2020
Niro (Hybrid Electrical)
Navigation
2020-2020
Niro (Plug-In Hybrid)
Navigation
2018-2020
Optima
Amplified
2019-2020
Sorento
Amplified
2019-2020
Soul
Amplified
2017-2020
Soul EV
Amplified
2020-2020
Sportage
Amplified
2017-2020
Axxess AXDSPL-HK4 Manual
Amplifier Add-On OEM Line-Converter & T-Harness for Select 2011-2020 Hyundai and KIA Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness along with an amplifier bypass harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for S/PDIF amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Blue Link®/UVO) with adjustable level
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Retains the ability to work with S/PDIF digitally controlled amplified systems
Factory amplifier does NOT need to be retained
Wiring to be completed at the amplifier location
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
HYUNDAI
Azera
Amplified
2012-2017
Elantra
Amplified
2011-2016
Equus
2011-2016
Sonata
2011-2017
Sonata
Amplified
2018-2020
Tucson
Amplified
2011-2019
Veloster
Amplified
2012-2017
KIA
Cadenza
Amplified
2014-2016
Optima
Amplified
2011-2018
Soul
Amplified
2012-2016
Sportage
Amplified
2011-2016
Axxess AXDSPL-HK2 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2020 BMW and MINI Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
BMW
1 Series
Base amp (non Fiber)
2008-2020
2 Series
Base amp (non Fiber)
2014-2020
3 Series
Base amp (non Fiber)
2006-2018
4 Series
Base amp (non Fiber)
2014-2020
5 Series
Base amp (non Fiber)
2010-2016
6 Series
Base amp (non Fiber)
2010-2017
7 Series
Base amp (non Fiber)
2010-2015
M3
Base amp (non Fiber)
2007-2013
X1
Base amp (non Fiber)
2015-2020
X3
Base amp (non Fiber)
2010-2018
X4
Base amp (non Fiber)
2015-2018
X5
Base amp (non Fiber)
2014-2018
X6
Base amp (non Fiber)
2015-2019
MINI
Cooper
2007-2015
Axxess AXDSPL-BM1 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2011-2020 Chrysler and Dodge Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
CHRYSLER
300
2011
2014
DODGE
Charger
2011
2014
Journey
2011
2020
Axxess AXDSPL-CH3 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2007-2020 Chrysler, Dodge, Jeep and RAM Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Applications
CHRYSLER
Town & Country
2008-2020
DODGE
Caravan/Grand Caravan
2008-2020
Dart
2013-2016
Nitro
2007-2011
JEEP
Grand Cherokee
2011-2013
Liberty
2008-2012
Wrangler (JK)
2007-2017
RAM
1500
2010-2012
Axxess AXDSPL-CH4 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2013-UP Chrysler, Dodge, Fiat, Jeep and RAM Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Uconnect®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
CHRYSLER
200
2015-2017
300
2015-2023
Pacifica
2017-2020
Pacifica
without separate screen
2021-2022
DODGE
Challenger
2015-2023
Charger
2015-2023
Durango
2014-2020
Durango
without separate screen
2021-2022
Viper
2015-2017
FIAT
500X
2015-2017
JEEP
Cherokee
2014-2020
Compass
2017-2021
Gladiator
2020-2023
Grand Cherokee
2014-2022
Renegade
2015-2019
Wrangler (JL)
2018-2023
RAM
1500/2500/3500
2013-2018
1500/2500/3500
2019-2021
Axxess AXDSPL-CH5 Manual
Add-On Amplifier OEM Integration Line Converter with DSP for Select 2006-2014 Ford Vehicles
Upgrade the sound system with this cost-effective, easy-to-install DSP“Lite” package that includes a vehicle-specific T-harness. It works with OEM or aftermarket radios to take fixed level/digitally controlled analog audio and convert it to 6 channels of analog signal for use with an aftermarket amplifier or DSP.
Retain Features with a Built-in InterfaceWhile this may be a “Lite” version, it still provides retention of many important vehicle functions utilizing Axxess’s cutting-edge technology. It features chime control, retains OEM voice prompts and sonar sensors, and has clipping detection and limiting circuits, going beyond what a traditional DSP can do.
Complete Tuning ControlThere are 4 inputs and 6 outputs, including front, rear and subwoofer, and the front and rear outputs can be delayed independently up to 10ms. Full tuning control settings are adjusted via a smart device application for tablets or mobile phones and can be password-protected once set up. Once tuning has been completed, installers can password-protect their settings to prevent anyone else from adjusting, and the information is stored for future recall.
Designed for amplified and non-amplified models
Package includes the AXDSP-L and vehicle-specific T-harness
15-band graphic EQ or 5-band Parametric EQ
Selectable high pass, low pass, or bandpass filters on each channel
4 inputs and 6 individually assignable outputs
Independent equalization on each of the 6 outputs
Selectable slope (12, 24, 36, or 48db per octave)
Each channel can be delayed independently for up to 10 ms
Easy behind the radio installation in most applications
Can be used with OE and aftermarket radios
Clipping detection and limiting circuits
Internal header port for adding interface modules
Bass knob included
Retains OE voice prompts (Sync®)
Retains factory chimes, including parking sensor and cross path detection alerts with adjustable chime level
Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
Read, write, and store configurations for future recall
Password-protect feature is available in the mobile app
Applications
FORD
Edge
2007-2010
Escape
2008-2012
Expedition
Non-Sony
2007-2014
F-150
2006-2013
Flex
2009-2012
Focus
2008-2011
Fusion
2006-2012
Mustang
2006-2014
Taurus
2008-2011
Axxess AXDSPL-FD1 Manual
Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles equipped with the Mark Levinson system are not compatible.
Lexus vehicles equipped with navigation are not compatible.
Lexus CT200h: Must be equipped with a center channel and a subwoofer
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.
LEXUS
CT 200H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
ES 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
GX 460
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2017
IS 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
IS 250
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2014-2015
IS 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
NX 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
NX 300H
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RC 200T
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 300
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
RC 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2015-2017
RX 350
ALL TRIM LEVELS
For AmpPRO: Without Navigation
2016-2017
TOYOTA
4Runner
ALL TRIM LEVELS
—
2014-2018
Avalon
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
Avalon
ALL TRIM LEVELS
—
2015-2018
Camry
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2014
Camry
ALL TRIM LEVELS
—
2015-2017
Highlander
ALL TRIM LEVELS
—
2014-2018
Prius
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2012-2015
Prius
ALL TRIM LEVELS
—
2016-2017
Rav4
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
Rav4
ALL TRIM LEVELS
—
2015-2018
Sequoia
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2013
Sequoia
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2014
Sequoia
ALL TRIM LEVELS
—
2015-2018
Sienna
ALL TRIM LEVELS
—
2015-2017
Tacoma
ALL TRIM LEVELS
—
2014-2018
Tundra
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness
2014-2015
Tundra
ALL TRIM LEVELS
—
2016-2019
Venza
ALL TRIM LEVELS
For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness
2013-2014
Venza
ALL TRIM LEVELS
—
2015-2016
Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin
Add-On Amplifier OEM Integration Interface for Select 2006-2024 Amplified Lexus and Toyota Vehicles
Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity.
Key Features
Perfect for use with AmpPRO AP4-TY11 and AP4-TY12
EIA standard color-coded wires make identifying factory speaker wires and phase easier
APH-TY04 harness eliminates having to run speaker wire throughout the car
18” Harness length
Applications
2018-2020 Toyota Sequoia: Only compatible in models equipped with the 14 speaker system
LEXUS
CT 200H
With factory amplifier
2011-2013
ES 350
With factory amplifier
2007-2012
GS 350
With factory amplifier
2007-2011
GS 450H
With factory amplifier
2007-2011
GX 460
With factory amplifier
2010-2013
HS 250H
With factory amplifier
2010-2012
IS 250
With factory amplifier
2006-2013
IS 350
With factory amplifier
2006-2013
RX 350
With factory amplifier
2008-2012
RX 400H
With factory amplifier
2007-2008
RX 450H
With factory amplifier
2012
TOYOTA
4Runner
With factory JBL amplifier
2010-2017
4Runner
With factory JBL amplifier
2019-2024
Avalon
With factory JBL amplifier
2011-2012
Land Cruiser
With factory JBL amplifier
2008-2011
Sequoia
With factory JBL amplifier
2008-2020
Sienna
With factory JBL amplifier
2011-2020
Tacoma
With factory JBL amplifier
2012-2017
Venza
With factory JBL amplifier
2009-2016
Pac Audio APH-TY04 Manual
Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles
Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.
AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time!
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Upgrade solution for factory, fixed level, data-bus controlled sound systems
Everything you need in one box to install your choice of aftermarket amplifier(s)
The time-saving design prevents the need for summing and audio correction devices.
Variable volume, fade, balance, bass, mid, and treble audio settings
Retains Bluetooth, navigation, safety system, and all warning chimes
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid, and treble center frequency selection
Plug-n-play installation with two 20-pin connectors (IE Bus)
Remote sub level controller included
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
Harness (IE Bus)
Bass knob
Knob harness
Manual
Applications
Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details.
Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital.
Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible:
Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference
Applications
LEXUS
CT 200H
With factory center channel, Without Navigation
2011-2013
ES 300
With factory center channel
2002-2003
ES 300H
With factory center channel, Without Navigation
2013-2014
ES 330
With factory center channel
2004-2006
ES 350
With factory center channel, Without Navigation
2007-2014
GX 460
With factory center channel, Without Navigation
2009-2013
GX 470
With factory center channel
2004-2009
HS 250H
With factory center channel, Without Navigation
2010-2012
IS 250
With factory center channel, Without Navigation
2006-2013
IS 350
With factory center channel, Without Navigation
2006-2013
IS F
With factory center channel, Without Navigation
2010-2012
LS 430
With factory center channel
2001-2006
RX 330
With factory center channel
2004-2006
RX 350
With factory center channel, Without Navigation
2007-2015
RX 400H
With factory center channel
2006-2008
RX 450H
With factory center channel, Without Navigation
2010-2015
TOYOTA
4Runner
With factory JBL amplifier
2003-2013
Avalon
With factory JBL amplifier
2005-2012
Avalon
8113, With factory JBL amplifier
2013-2014
Camry
With factory JBL amplifier
2007-2011
Camry
8113, With factory JBL amplifier
2012-2014
Corolla
With factory JBL amplifier
2005-2011
FJ Cruiser
With factory JBL amplifier
2011-2014
Highlander
With factory JBL amplifier
2008-2013
Land Cruiser
With factory JBL amplifier
2008
Prius
With factory JBL amplifier
2004-2011
Prius
8113, With factory JBL amplifier
2012-2015
Rav4
With factory JBL amplifier
2004-2013
Rav4
8113, With factory JBL amplifier
2014
Sequoia
With factory JBL amplifier
2005-2012
Sequoia
8113, With factory JBL amplifier
2013-2014
Sienna
With factory JBL amplifier
2004-2014
Tacoma
With factory JBL amplifier
2005-2013
Tundra
With factory JBL amplifier
2005-2013
Venza
With factory JBL amplifier
2009-2012
Venza
8113, With factory JBL amplifier
2013-2014
Pac Audio AP4-TY11 Manual
Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles
Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's Speaker Connection Harness. Can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. APH-GM02 works with PAC AmpPRO module: AP4-GM61
Features:
Can be used for other installations requiring plug-n-play speaker wire connections
Easily add amplifiers without cutting or modifying the vehicle’s original wiring.
Provides a plug-n-play connection at the vehicle’s original amplifier location
Saves time by quickly utilizing the original speaker wires
Harness length 18"
Applications
CADILLAC
Escalade
With BOSE
2015-2018
CHEVROLET
Camaro
With BOSE
2016-2018
Colorado
With BOSE
2015-2018
Corvette
With BOSE
2014-2019
Cruze
With BOSE
2017-2018
Equinox
With BOSE
2018
Impala
With BOSE
2014-2016
Impala
With BOSE
2017-2019
Malibu
With BOSE
2016
Malibu
With BOSE
2017-2018
Silverado
With BOSE
2014-2018
Silverado
Classic model, With BOSE
2019
Silverado HD
With BOSE
2015-2019
Suburban
With BOSE
2015-2018
Tahoe
With BOSE
2015-2019
Traverse
With BOSE
2018-2019
GMC
Acadia
With BOSE
2018-2019
Canyon
With BOSE
2015-2018
Sierra
With BOSE
2014-2018
Sierra HD
With BOSE
2015-2019
Terrain
With BOSE
2018
Yukon
With BOSE
2015-2019
Yukon XL
With BOSE
2015-2019
Pac Audio APH-GM02 Manual
Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Features
Simplifies amplifier installation in data-bus controlled factory sound systems
Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped)
Front, rear, and sub preamp outputs (5V RMS)
Plug-and-play installation with factory-matched harness
Sub level controller included
Optical output included
Applications
Vehicle must be equipped with factory B&O system to be compatible
Factory amplifier must be removed from vehicle when installing this interface
FORD
Bronco
With factory B&O amplifier
2021-2024
Bronco Sport
With factory B&O amplifier
2021-2024
Eco Sport
With factory B&O amplifier
2021
Edge
With factory B&O amplifier
2019-2022
Escape
With factory B&O amplifier
2021-2025
Expedition
With factory B&O amplifier
2018-2023
Explorer
With factory B&O amplifier
2020-2024
F-150
With factory B&O amplifier
2018-2024
F-250
With factory B&O amplifier
2020-2024
F-350
With factory B&O amplifier
2020-2024
F-450
With factory B&O amplifier
2020
Lightning
With factory B&O amplifier
2022
Maverick
With factory B&O amplifier
2022-2024
Mustang
With factory B&O amplifier
2024-2025
Mustang Mach E
With factory B&O amplifier
2021-2024
Ranger
With factory B&O amplifier
2020-2024
Pac Audio AP4-FD31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains Sync, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
24-pin (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-FD01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification.
FORD
F-150
With or Without factory Sony amplifier
2009-2012
Flex
With or Without factory Sony amplifier
2009-2012
Fusion
With or Without factory Sony amplifier
2010-2012
Taurus
With or Without factory Sony amplifier
2010-2012
LINCOLN
MKS
With or Without factory Sony amplifier
2009-2012
MKT
With or Without factory Sony amplifier
2010-2012
MKX
With or Without factory Sony amplifier
2007-2010
MKZ
With or Without factory Sony amplifier
2007-2012
Navigator
With or Without factory Sony amplifier
2007-2014
Pac Audio AP4-FD11 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (Dual MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
300
ALL TRIM LEVELS
2011-2014
DODGE
Charger
ALL TRIM LEVELS
2011-2014
Journey
ALL TRIM LEVELS
2011-2015
MASERATI
Ghibli
ALL TRIM LEVELS
2015
Quattroporte
ALL TRIM LEVELS
2014-2016
Pac Audio AP4-CH31 Manual
Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles
AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features.
Benefits
Simplifies amplifier installation
It prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Features
It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention.
Enables the addition of a subwoofer system to the original sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Provides flat audio output for a solid audio foundation
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, and all warning chimes
Plug & play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
22-pin harness (MS-CAN)
Bass knob
Knob harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Applications
This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
CHRYSLER
Town & Country
With factory amplifier
2008-2016
DODGE
Challenger
With factory amplifier
2008-2014
Charger
With factory amplifier
2008-2010
Durango
With factory amplifier
2011-2013
Durango
With factory amplifier
2009
Grand Caravan
With factory amplifier
2008-2018
RAM 1500, 2500, 3500
With factory amplifier
2009-2012
JEEP
Grand Cherokee
With factory amplifier
2008-2013
Wrangler
JK, With factory amplifier
2018
Wrangler
With factory amplifier
2007-2017
Wrangler Unlimited
JK, With factory amplifier
2018
Wrangler Unlimited
With factory amplifier
2007-2017
RAM
1500, 2500, 3500
With factory amplifier
2010-2012
Pac Audio AP4-CH21 Manual
Add-On OE Amplifier-Integration Wiring-Harness for Select 2021-UP Amplified Chrysler, Dodge, and RAM Vehicles with uConnect5 Factory Audio Systems
Must be used with AP4-CH41 R.2
Plug and play solution for UConnect5 that allows you to use an AmpPRO with most Chrysler vehicles.
Benefits
Simplifies amplifier installation
Prevents the need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sublevel controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Must be used with AP4-CH41 R.2
Amplified Vehicles
Compatible with all data-bus controlled amplified systems, no matter the screen size. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.
Non-Amplified Vehicles
All other models: Only compatible in vehicles equipped with the 7” or bigger screen. Vehicles equipped with the 5” screen are not compatible.
If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4-channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly.
CHRYSLER
Pacifica
7" screen, 8" screen, With factory amplifier
2021-2022
DODGE
Durango
7" screen, 8" screen, With factory amplifier
2021
JEEP
Gladiator
2024
Wrangler
2024-2025
Wrangler Unlimited
2024-2025
RAM
1500, 2500, 3500
7" screen, 8" screen, With factory amplifier
2022-2024
No Manual Available
Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles
Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring.
Quickly and easily bypass the ANC Module.
Keeps ANC module on data-bus for vehicle diagnostics health
Factory fit plug-in connectors
Prevents cutting of factory wires
Applications
CHRYSLER
Pacifica
ALL TRIM LEVELS
2017-2019
DODGE
RAM 1500, 2500, 3500
NON-CLASSIC
2019
JEEP
Cherokee
ALL TRIM LEVELS
2019
Grand Cherokee
ALL TRIM LEVELS
2015-2016
RAM
1500, 2500, 3500
NON-CLASSIC
2019
Pac Audio ANC-CH01 Manual
Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2006-2013 BMW 1-Series and 3-Series Vehicles
Provides accessory power (12 volt 10 amp)
Retains R.A.P. (retained accessory power)
Designed for amplified models
Retains audio controls on the steering wheel
Retains phone buttons (radio dependent)
Retains factory features: date, time, temperature display
Warning and parking sensor chimes are not retained
Micro-B USB updatable
*Note:* Warning and Parking sensor chimes are not retained
Amplified Applications
BMW
1 Series
2008-2013
3 Series
2006-2013
Axxess AXDIS-BW122 Installation Manual
Amplified Head-Unit Replacement Wiring-Harness for Select 2002-2010 Chrysler and Dodge Vehicles
The AXTO-CH2 interface is designed to allow the user to replace the OEM radio with an aftermarket unit in amplified 2002-2004 Dodge Ram and 2004-2008 Chrysler Pacifica vehicles. Retains the use of the OEM amplified audio system.
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Designed for amplified systems
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired ASWC-1 harness (ASWC-1 sold separately)
Adjustable gain control for overall volume
High level speaker input
Retains balance and fade
Micro-B USB updatable
Amplified Applications
CHRYSLER
Pacifica
2004-2008
DODGE
Ram Pickup 1500
2002-2004
Ram Pickup 2500, 3500
2003-2004
Viper
2008-2010
Axxess Interface AXTO-CH2 Manual
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1998-2005 Ford, Lincoln and Mercury Vehicles
Ford premium with RCAs
Pre amp plug 3
Amplified Applications
FORD
Explorer
1998-2005
LINCOLN
Aviator
2003
Navigator
1999-2002
MERCURY
Mountaineer
1998-2005
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2001-2008 BMW, MINI and Pontiac Vehicles
Plugs into car
Power / 4 Speakers
Non-Amplified Applications
BMW
3 Series
2002-2006
5 Series
2001-2003
Alpina D10
2001-2003
M3
2002-2006
M5
2001-2003
X5
2000-2006
Z4
2003-2008
MINI
Convertible (R52)
2005-2008
Hatchback (R50, R53)
2002-2006
PONTIAC
G8
2008-2009
Amplified Applications
BMW
3 Series
2002-2006
M3
2002-2006
Z4
2003-2008
Z8
2000-2003
