C6-Series 1-Inch 75-Watt Single Silk Dome Component Tweeter
Born from the same DNA as the JL Audio flagship C7 speakers, the C6 series component drivers let you team premium, pure silk dome tweeters with highly linear woofers to create a loudspeaker system of exceptional refinement, precision and dynamic capability.
Pairing full-frame 6.5-inch or 2.75-inch woofers with 1-inch silk dome tweeters, the C6 series drivers offer advanced sound technology for an exceptional car audio listening experience. Passive crossover networks are not included with the C6 drivers, as they are designed for active systems.
An edge-driven pure silk dome tweeter design, when paired with the C6 woofer, produces sparkling detail with excellent off-axis response and damping for balanced coverage in your listening environment. An automatic, solid-state tweeter protection circuit minimizes the possibility of tweeter failure.
A high-quality tuning Digital Signal Processor (DSP) — such as the TwK® DSP or a VXi amplifier with built-in DSP — is recommended. Using individual amplifier channels for each C6 speaker enables the system designer to achieve precise setup of equalization, delay and crossover filters for optimal in-vehicle performance.
Sold as a single tweeter.
General Specifications
SIZES
1", 2.75", 6.5"
CONTINUOUS POWER HANDLING (RMS)
1": 75W, 2.75": 50W, 6.5": 100W
SENSITIVITY (SPL @ 1 W/1 M)
1": 90dB, 2.75": 83.50dB, 6.5": 87.37dB
SENSITIVITY (SPL @ 1 W/0.5 M)
1": 96dB
SENSITIVITY (SPL @ 2.83 V/1 M)
1": 93dB, 2.75": 86.50dB, 6.5": 90.33dB
FREQUENCY RESPONSE (+/- 3 DB)
1": 3kHz-21KHz, 2.75": 350 Hz-4.KHz, .5": 55Hz-6KHz
NOMINAL IMPEDANCE
4 Ω
RECOMMENDED AMPLIFIER POWER (RMS)
1": 25-100W Channel, 2.75": 25-80W Channel, 6.5": 25-150W Channel
VOICE COIL DIAMETER
2.75": 0.8" (20.5mm), 6.5": 1.27" (32mm)
CONE MATERIAL
Vacuum-formed, mineral-filled polypropylene
TWEETER TYPE
Silk Dome
TWEETER SIZE
1" (25mm)
GRILLE(S) INCLUDED
yes
WARRANTY
1 year
CONNECTIONS
SPEAKER CONNECTIONS
Spade connectors
MOUNTING DIMENSIONS
FRAME OUTER DIAMETER
2.75": 2.52" (77mm), 6.5": 6.5" (165mm)
MOUNTING DEPTH CLEARANCE
2.75": 1.42" (36mm), 6.5": 2.60" (66mm)
FRONTAL GRILLE PROTRUSION
2.75": 0.47" (12mm), 6.5": 1" (25mm)
MOUNTING HOLE
2.75": 2.52" (64mm), 6.5": 5.46" (139mm)
GRILLE TRAY OUTER DIAMETER
2.75": 3.58" (91mm), 6.5": 6.76" (172mm)
BOLT HOLE CIRCLE
2.75": 3.03" (77mm), 6.5": 6.12" (156mm)
MOTOR OUTER DIAMETER
2.75": 2.75" (69mm), 6.5": 3.54" (90mm)
PARMETERS
FREE AIR RESONANCE (FS)
1": 1500Hz, 2.75": 185Hz, 6.5": 52.8Hz
ELECTRICAL “Q” (QES)
2.75": 0.769, 6.5": 0.647
MECHANICAL “Q” (QMS)
2.75": 7.848, 6.5": 5.076
TOTAL “Q” (QTS)
2.75": 0.700, 6.5": 0.574
EQUIVALENT COMPLIANCE (VAS)
2.75": 0.0353 cu ft (0.125L), 6.5": 0.532 cu ft (15.069L)
ONE-WAY LINEAR EXCURSION (XMAX; SPECS ARE DERIVED VIA ONE-WAY VOICE COIL OVERHANG METHOD WITH NO CORRECTION FACTORS APPLIED)
2.75": 0.059" (1.50mm), 6.5": 0.148" (3.75mm)
REFERENCE EFFICIENCY (NO)
1": 0.602%, 2.75": 0.1414%, 6.5": 0.344%
MOVING MASS (MMS)
2.75": 4.65g, 6.5": 16.42g
MECHANICAL COMPLIANCE (CMS)
2.75": 0.00031 m/N, 6.5": 0.000581 m/N
MAGNETIC STRENGTH (BL)
2.75": 5.03, 6.5": 5.186
EFFECTIVE PISTON AREA (SD)
2.75": 3.66 in² (0.00236m²), 6.5": 21.4 in² (0.013807m²)
DC RESISTANCE (RE)
1" & 6.5": 3.20Ω, 2.75": 3.58Ω
TWEETER SPECS
FLUSH MOUNT FIXTURE DIAMETER
1": 2.13" (54mm)
SURFACE MOUNT FIXTURE DIAMETER
1": 2.11" (54mm)
FLUSH MOUNT MOUNTING HOLE DIAMETER
1": 1.85" (47mm)
FLUSH MOUNT MOUNTING DEPTH
1": 1.85" (47mm)
FLUSH MOUNT TWEETER FRONTAL PROTRUSION
1": 0.30" (8mm)
SURFACE MOUNT TWEETER FRONTAL PROTRUSION
1": 1.04" (26mm)
C3-Series 1-Inch 75-Watt Pair of Silk Dome Component Tweeters
The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.
The C3 component tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be installed coaxially onto the C3 woofers using the fixtures included with the C3 Component / Coaxial Systems.
Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C3-100ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.
Sonic character: Clean and Powerful
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
75 W
Peak Music Power*
225 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
4 kHz - 25 KHz ± 3 dB
JL Audio C3-650 Manual
C3-Series 6.5-Inch 75-Watt Component Woofer with Grille
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The C3-650cw is a 6.5-inch (165 mm) component woofer with an oversized 1.2-inch (30.5 mm) voice coil, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
A woofer grille is included, consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold individually.
Includes Component Phase Plug and Tweeter Post (Tweeter sold separately).
General Specifications
Continuous Power Handling (RMS)
60 W
Peak Music Power
150 W
Recommended Amplifier Power (RMS)
15 - 100 W / Ch.
System Efficiency
91.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
59 Hz - 6 KHz ± 3 dB
Physical Specifications
Frame Outer Diameter (A)
6.50 in / 165 mm
Grille Tray Outer Diameter (B)
6.74 in / 171 mm
Motor Outer Diameter (C)
4.08 in / 104 mm
Frontal Coaxial Tweeter Protrusion* (D)
0.75 in / 19 mm
Frontal Grille Protrusion** (E)
1.03 in / 26 mm
Mounting Hole Diameter (F)
5.56 in / 141 mm
Mounting Depth (G)
2.55 in / 65 mm
JL Audio C3-650cw Manual
C3-Series 6-Inch 75-Watt Component Woofer with Grille
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The new C3-600cw expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker.
The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
A woofer grille is included, consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold individually.
Includes Component Phase Plug and Tweeter Post (Tweeter sold separately).
General Specifications
Continuous Power Handling (RMS)
75 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
89.5 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
50 Hz - 25 KHz ± 3 dB
Physical Specifications
Frame Outer Diameter (A)
6.21 in. / 157.7 mm
Grille Tray Outer Diameter (B)
6.46 in. / 164.1 mm
Motor Outer Diameter (C)
4.08 in. / 103.6 mm
Frontal Coaxial Tweeter Protrusion* (D)
0.81 in. / 20.6 mm
Frontal Grille Protrusion** (E)
1.03 in. / 26.2 mm
Mounting Hole Diameter (F)
5.00 in. / 127 mm
Mounting Depth (G)
2.49 in. / 63 mm
JL Audio C3-600cw Manual
C3-Series 5x7-Inch 75-Watt Component Woofer with Grille
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.
The C3-570cw is a 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofer with oversized 1.2-inch (30.5 mm) voice coil, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
Woofer grilles are not available for this product.
Sonic character: Clean and Powerful
Sold individually.
Includes Component Phase Plug and Tweeter Post (Tweeter sold separately).
General Specifications
Continuous Power Handling (RMS)
75 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
48 Hz - 25 KHz ± 3 dB
Physical Specifications
Frame Outer Diameter* (A)
5.52 x 7.68 in / 140 x 195 mm
Grille Tray Outer Diameter (B)
N/A
Motor Outer Diameter (C)
4.08 in / 104 mm
Frontal Coaxial Tweeter Protrusion** (D)
0.78 in / 20 mm
Frontal Grille Protrusion (E)
N/A
Mounting Hole Diameter (F)
N/A
Mounting Depth (G)
2.52 in / 64 mm
JL Audio C3-570cw Manual
C3-Series 5.25-Inch 75-Watt Component Woofer with Grille
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The C3-525cw is a 5.25-inch (130 mm) component woofer with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold individually.
Includes Component Phase Plug and Tweeter Post (Tweeter sold separately).
General Specifications
Continuous Power Handling (RMS)
75 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
48 Hz - 25 KHz ± 3 dB
Physical Specifications
Frame Outer Diameter* (A)
5.80 in / 147 mm
Grille Tray Outer Diameter (B)
6.00 in / 152 mm
Motor Outer Diameter** (C)
3.38 in / 86 mm
Frontal Coaxial Tweeter Protrusion*** (D)
0.69 in / 18 mm
Frontal Grille Protrusion**** (E)
1.00 in / 25 mm
Mounting Hole Diameter (F)
4.56 in / 116 mm
Mounting Depth (G)
2.27 in / 58 mm
JL Audio C3-525cw Manual
C6-Series 6.5-Inch 75-Watt Single Component Door Woofer.
Born from the same DNA as the JL Audio flagship C7 speakers, the C6 series component drivers let you team premium, pure silk dome tweeters with highly linear woofers to create a loudspeaker system of exceptional refinement, precision and dynamic capability.
Pairing full-frame 6.5-inch or 2.75-inch woofers with 1-inch silk dome tweeters, the C6 series drivers offer advanced sound technology for an exceptional car audio listening experience. Passive crossover networks are not included with the C6 drivers, as they are designed for active systems.
Proprietary motor, suspension and cone modeling systems are employed, resulting in reduced distortion, improved transient performance and stellar sound quality. The woofer’s center cap is designed to optimize its high-frequency response for seamless tweeter transition.
A high-quality tuning Digital Signal Processor (DSP) — such as the TwK® DSP or a VXi amplifier with built-in DSP — is recommended. Using individual amplifier channels for each C6 speaker enables the system designer to achieve precise setup of equalization, delay and crossover filters for optimal in-vehicle performance.
Sold as a single speaker.
General Specifications
SIZES
1", 2.75", 6.5"
CONTINUOUS POWER HANDLING (RMS)
1": 75W, 2.75": 50W, 6.5": 100W
SENSITIVITY (SPL @ 1 W/1 M)
1": 90dB, 2.75": 83.50dB, 6.5": 87.37dB
SENSITIVITY (SPL @ 1 W/0.5 M)
1": 96dB
SENSITIVITY (SPL @ 2.83 V/1 M)
1": 93dB, 2.75": 86.50dB, 6.5": 90.33dB
FREQUENCY RESPONSE (+/- 3 DB)
1": 3kHz-21KHz, 2.75": 350 Hz-4.KHz, .5": 55Hz-6KHz
NOMINAL IMPEDANCE
4 Ω
RECOMMENDED AMPLIFIER POWER (RMS)
1": 25-100W Channel, 2.75": 25-80W Channel, 6.5": 25-150W Channel
VOICE COIL DIAMETER
2.75": 0.8" (20.5mm), 6.5": 1.27" (32mm)
CONE MATERIAL
Vacuum-formed, mineral-filled polypropylene
TWEETER TYPE
Silk Dome
TWEETER SIZE
1" (25mm)
GRILLE(S) INCLUDED
yes
WARRANTY
1 year
CONNECTIONS
SPEAKER CONNECTIONS
Spade connectors
MOUNTING DIMENSIONS
FRAME OUTER DIAMETER
2.75": 2.52" (77mm), 6.5": 6.5" (165mm)
MOUNTING DEPTH CLEARANCE
2.75": 1.42" (36mm), 6.5": 2.60" (66mm)
FRONTAL GRILLE PROTRUSION
2.75": 0.47" (12mm), 6.5": 1" (25mm)
MOUNTING HOLE
2.75": 2.52" (64mm), 6.5": 5.46" (139mm)
GRILLE TRAY OUTER DIAMETER
2.75": 3.58" (91mm), 6.5": 6.76" (172mm)
BOLT HOLE CIRCLE
2.75": 3.03" (77mm), 6.5": 6.12" (156mm)
MOTOR OUTER DIAMETER
2.75": 2.75" (69mm), 6.5": 3.54" (90mm)
PARMETERS
FREE AIR RESONANCE (FS)
1": 1500Hz, 2.75": 185Hz, 6.5": 52.8Hz
ELECTRICAL “Q” (QES)
2.75": 0.769, 6.5": 0.647
MECHANICAL “Q” (QMS)
2.75": 7.848, 6.5": 5.076
TOTAL “Q” (QTS)
2.75": 0.700, 6.5": 0.574
EQUIVALENT COMPLIANCE (VAS)
2.75": 0.0353 cu ft (0.125L), 6.5": 0.532 cu ft (15.069L)
ONE-WAY LINEAR EXCURSION (XMAX; SPECS ARE DERIVED VIA ONE-WAY VOICE COIL OVERHANG METHOD WITH NO CORRECTION FACTORS APPLIED)
2.75": 0.059" (1.50mm), 6.5": 0.148" (3.75mm)
REFERENCE EFFICIENCY (NO)
1": 0.602%, 2.75": 0.1414%, 6.5": 0.344%
MOVING MASS (MMS)
2.75": 4.65g, 6.5": 16.42g
MECHANICAL COMPLIANCE (CMS)
2.75": 0.00031 m/N, 6.5": 0.000581 m/N
MAGNETIC STRENGTH (BL)
2.75": 5.03, 6.5": 5.186
EFFECTIVE PISTON AREA (SD)
2.75": 3.66 in² (0.00236m²), 6.5": 21.4 in² (0.013807m²)
DC RESISTANCE (RE)
1" & 6.5": 3.20Ω, 2.75": 3.58Ω
TWEETER SPECS
FLUSH MOUNT FIXTURE DIAMETER
1": 2.13" (54mm)
SURFACE MOUNT FIXTURE DIAMETER
1": 2.11" (54mm)
FLUSH MOUNT MOUNTING HOLE DIAMETER
1": 1.85" (47mm)
FLUSH MOUNT MOUNTING DEPTH
1": 1.85" (47mm)
FLUSH MOUNT TWEETER FRONTAL PROTRUSION
1": 0.30" (8mm)
SURFACE MOUNT TWEETER FRONTAL PROTRUSION
1": 1.04" (26mm)
C3-Series 5.25-Inch 75-Watt Convertible Component Speaker System
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The C3-525 system features 5.25-inch (130 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
75 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
48 Hz - 25 KHz ± 3 dB
JL Audio C3-525 Manual
C3-Series 5x7" 75-Watt Convertible Component Speaker System
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.
The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are not available for this product.
Sonic character: Clean and Powerful
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
75 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
48 Hz - 25 KHz ± 3 dB
JL Audio C3-570 Manual
C3-Series 6-Inch 75-Watt Convertible Component Speaker System
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker.
The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
75 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
89.5 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
50 Hz - 25 KHz ± 3 dB
JL Audio C3-600 Manual
C3-Series 6.5-Inch 75-Watt Convertible Component Speaker System
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Powerful
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
75 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
25 - 150 W / Ch.
System Efficiency
90.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
48 Hz - 25 KHz ± 3 dB
JL Audio C3-650 Manual
