At this present time our store location is open by appointment only.

6 x 9" Driver

Automotive Speakers and Accessories with a Driver Size of 6 x 9-Inches

Automotive Speakers and Accessories with a Driver Size of 6 x 9-Inches

20 products

  • 100W 6x9" Coaxial Speakers : Kicker 44QSC694 100W 6x9" Coaxial Speakers : Kicker 44QSC694 driver shown.

    Kicker 44QSC694 : 100W 6x9" Coaxial Speakers

    Pre-Order Today!

    6x9-Inch 100-Watt Coaxial Speakers This pair of QS series 6x9" coaxial audiophile speaker drivers by Kicker feature neodymium magnets on the woofer and tweeter, and are bi-amp capable. Incased within the speaker chassis is you will find a 25mm Teteron® dome tweeter with Kicker's custom wave guide technology for near perfect phase alignment for smooth frequency response. The injection-molded Polypropylene cone of this coaxial door speaker is impregnated with carbon-fiber for tight, accurate midrange. An NBR rubber surround provides superior damping, and complemented by a signature blue double surround stitching. The independent 18dB crossover has been optimized for size, and features built-in tweeter protection. Utilizing Metallized Polypropylene capacitors, high-powered resistors and audiophile-grade air-core inductors, the crossover delivers outstanding overall sound quality and easy mounting in a door or under a seat. These Kicker QS 6x9 inch door speakers have an amplified RMS power range of 100W. This pair of drivers also has speaker adaptor rings, allowing them to be installed using select factory location mounting. Specifications Woofer (in., mm) 6x9, 160x230 Tweeter (in., mm) 1, 25 Tweeter dome material Teteron® Rated Impedance [Ω] 4 Recommended Amplifier Power (watts RMS) 100 Peak Power (watts, per ANSI/CTA-2031-A) 200 Sensitivity [1W, 1m] 88dB Frequency Response [Hz] 30-20k Woofer Mounting Hole Diameter [in, mm] 4-13/16x8-5/8, 121.9x219 Woofer Mounting Depth [in, mm] 3, 76.2 High Pass [dB], at Frequency [Hz] 18, 5.5k Low Pass [dB], at Frequency [Hz] 18, 5.5k Comments Crossover is bi-amp capable. Kicker QS Series Coaxial Speaker Manual

    Pre-Order Today!

    $449.99

  • Alpine R2-S69C : 6x9" Component Door Speaker System, 100W RMS Alpine R2-S69C : 6x9" Component Door Speaker System, woofer and tweeter.

    Alpine R2-S69C : 6x9" Component Door Speaker System, 100W RMS

    Pre-Order Today!

    Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applic The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S69 is a standard coaxial speaker set that includes a 6x9” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone  Die-Cast Aluminum Basket  Ferrite Magnet Structure  High-Amplitude Multi-Roll (H.A.M.R.) Surround  2 Premium-Grade Full Passive Performance Crossover Networks   Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing  Protective Open Mesh Grille Pair Included Specifications 6x9” Mid-Bass with 1” Tweeter Frequency Response: 60Hz -40kHz  Power Handling: 100W RMS / 300W Peak

    Pre-Order Today!

    $349.99

  • Alpine R2-S69 : 6x9" Coaxial Door Speaker System, 100W RMS Alpine R2-S69 : 6x9" Coaxial Door Speaker System, woofer.

    Alpine R2-S69 : 6x9" Coaxial Door Speaker System, 100W RMS

    Pre-Order Today!

    Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S69 is a standard coaxial speaker set that includes a 6x9” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone  Die-Cast Aluminum Basket  Ferrite Magnet Structure  High-Amplitude Multi-Roll (H.A.M.R.) Surround  2 Premium-Grade Full Passive Performance Crossover Networks   Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing  Protective Open Mesh Grille Pair Included Specifications 6x9” Mid-Bass with 1” Tweeter  Frequency Response: 60Hz -40kHz  Power Handling: 100W RMS / 300W Peak

    Pre-Order Today!

    $299.99

  • JL Audio C2-690tx : 6x9" 3-Way Coaxial Speakers - 70W RMS JL Audio C2-690tx : 6x9" 3-Way Coaxial Speaker top side with no grille.

    JL Audio C2-690tx : 6x9" 3-Way Coaxial Speakers, 70W RMS

    2 Available for pickup

    C2-Series 6x9" 70-Watt  3-Way Coaxial Speaker System The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. General Specs Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB JL Audio C2-690tx Manual

    2 Available for pickup

    $259.99

  • Kicker 47KSS6904 : 6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System. Kicker 47KSS6904 : 6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System contents.

    Kicker 47KSS6904 : 125W 6x9" Convertible Component Speakers

    2 Available for pickup

    6x9-Inch 125-Watt Component or Coaxial Mountable Speaker System Kicker KS-Series door-speakers let you play at concert-like volume while pleasing even the most selective ear. Internally dampened polypropylene cones and durable rubber surrounds assist the woofers in creating precise midrange and bass, while high-quality silk-dome tweeters deliver natural, detailed highs. These 6x9" Kicker speakers component system with separate tweeters, or convert them to a coaxial system. The woofers’ removable bullet-style phase plug is replaced with a special adapter, allowing the 25 millimeter, silk-dome tweeters to rotate and tilt. You get more system design options and superior off-axis performance. They work best with 15 to 125 watts of recommended power. See below for more details. High power handling Silk-dome tweeters for a smooth sound Polypropylene woofer and tough rubber surrounds Thin-mount design easily fits behind factory grilles Four tweeter mounting options Articulating tweeter pod included Smaller crossover makes mounting even easier Grilles included Specifications Woofer [in, mm] 6x9, 160x230 Tweeter [in,mm] 1, 25 Dome Material Silk Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 35-21k Woofer Mounting Hole Diameter [in, mm] 5-5⁄8x8-7⁄16, 143x215 Woofer Bottom Mount Depth [in, mm] 2-15⁄16, 75 Flush Mount Tweeter Hole Diameter [in,mm] 1-¾, 45 Flush Mount Tweeter Depth [in,mm] 11⁄16 , 17 High Pass [dB], at Frequency [Hz] 12, 4,000 Low Pass [dB], at Frequency [Hz] none High Frequency Output Attenuation [dB] 0, 4.5, 9 Kicker KS Series Component Speaker Manual

    2 Available for pickup

    $249.99

  • 90W 6x9" Motorcycle Coaxial Speakers, 2Ω or 4Ω Voice Coil : Kicker 40PS69 90W 6x9" Motorcycle Coaxial Speakers, 2Ω or 4Ω Voice Coil : Kicker 40PS69, with grille.

    Kicker 40PS69 : 90W 6x9" Motorcycle Coaxial Speakers, 2Ω or 4Ω Voice Coil

    Pre-Order Today!

    6 x 9-Inch 90-Watt RMS Coaxial Motorcycle Speakers, 2-Ohm or 4-Ohm Drivers The 6x9" P40PS motorcycle coaxial speakers by Kicker are designed by bike riders and power-sports enthusiasts to sound good and last while retaining a weatherproof rating. These 90W Kicker speakers are the perfect solution for motorcycles, ATV’s and Side-by-Sides. The Kicker PS 6x9" Coaxial Speaker Includes One Pair Of 6x9" Speakers 2 or 4 Ohm Voice Coil Recommended Power 90 Watts - Peak 180 Watts High-Efficiency Titanium Tweeter Perfect Fairing Drop-Ins  The Kicker 40PS692 and 40PS694 weather-proof drivers are a perfect fairing drop-in on many motorcycles. Use these 6x9-inch speakers with UTV, ATV, marine, or outdoor systems. The rugged PS69 system utilizes heavy-duty ceramic magnets for high power handling and volume for ultra-clear music reproduction through helmets - even at highway speeds. Specifications  Woofer (in, mm) 6 x 9, 150 x 230 Tweeters (in, mm) 1, 25 Impedance (Ohms) 2 Max Rec Amp Power (watts PEAK/RMS) 180/90 Sensitivity (dB 1w/1m) 87.3 Frequency Response (Hz) 40 - 20k Mounting Hole Diameter (in, mm) 5/8 x 8-7/16, 143 x 214 Mounting Depth (in, mm) 3 1/4, 83 Weight (oz, g) 43.5, 1233 Grilles Yes Kicker 40PS69 Manual

    Pre-Order Today!

    $219.99

  • Alpine S2-S69C : 6x9" 85W RMS Component Speakers Alpine S2-S69C : 6x9" 85W RMS Component Woofer

    Alpine S2-S69C : 6x9" 85W RMS Component Speakers

    3 Available for pickup

    Alpine 6X9-Inch Component 2-Way Speakers, 85-Watt RMS Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S69C 6x9” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra- High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry- level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S69C is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. Experience a fuller and richer sound with the S2-S69C's unique 3" midrange speakers with built-in 3/4" tweeters. Designed to capture the midrange frequencies present in vocals and acoustic instruments, this added midrange speaker enhances your music like never before. Alpine-exclusive High Amplitude Multi- Roll (HAMR) surround technology is integrated into the speaker design which allows for maximum cone movement, delivering powerful and accurate bass notes. The S-Series S2-S69C is compatible with the KTE-S69G Speaker Grille (sold separately). This sleek and stylish grille will not only add a visual upgrade to your speakers but also provide protection against any damage. Specifications Hi-Res Audio Certified (Up to 40kHz) Poly Propylene, Glass Fiber, and Mica Cone Material Lightweight Design with High Output and Low Distortion High-Amplitude Multi-Roll (H.A.M.R.) Surround   Included 3” Mid-Range with built-in 3/4" Tweeter (Coaxial) OEM Fitment with In-Line Crossovers Compatible with KTE-S69G Speaker Grille (sold separately) Woofer Size: 6x9” Mid-Range/Tweeter: 3" with built-in 3/4” Tweeters (Coaxial) Power Handling: 85W RMS / 260W Peak Frequency Response: 65Hz - 40kHz (Hi-Res) Sensitivity: 90dB

    3 Available for pickup

    $199.99

  • Kicker 46CSS694 : 150-Watt Component Speakers Six-x-Nine" Drivers 6x9" 150W Component Speaker System : Kicker 46CSS694 woofer.

    Kicker 46CSS694 : 6x9" 150W Component Speaker System

    Pre-Order Today!

    150-Watt Component Speakers Six-x-Nine" Drivers The CS Series 6-x-9 inch component speakers by Kicker are designed for easy installation in nearly any vehicle. These components include separate titanium flush, angled or surface-mount tweeters and two-way crossovers with tweeter level control to let you customize your sound for the best sonic quality. The Kicker CS Series six-by-nine" speakers work best with up to 150-watts of recommended power. Specifications  Woofer Size | in [mm] 6x9 [160x230] Tweeter Size | in [mm] 3/4 [20] Dome Material Titanium Peak Power | [watts] 450 Continuous Power | [watts RMS] 150 Effective Frequency Range | Hz 30-21k Woofer Mounting Hole Diameter | in [mm] 5 5/8 x 8 7/16 [143x215] Woofer Bottom Mount Depth | in [mm] 3 3/16 [81] Flush Mounting Tweeter Hole Diameter | in [mm] 1 9/16 [40] Flush Mount Tweeter Depth | in [mm] 9/16 [14.5] High Pass | dB, at Frequency | Hz 12, 4000 Low Pass | dB, at Frequency | Hz 12, 4000 High Frequency Output Attenuation | dB 0, 3, & 6 Bolt-Thru Grilles Yes Kicker CS Component Speaker Manual

    Pre-Order Today!

    $199.99

  • JL Audio C1-690 : 6x9" Component Speakers - 60W RMS JL Audio C1-690 : 6x9" Component Speaker crossover.

    JL Audio C1-690 : 6x9" Component Speakers, 60W RMS

    2 Available for pickup

    C1-Series 6x9-Inch 60-Watt Component Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690 woofers to be installed in bottom-mount applications. Surface and flush mounts are included with C1 tweeters for maximum installation versatility. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690 is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, 1-inch aluminum dome tweeter, the C1-690 stands further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 89.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 39 Hz - 22 KHz ± 3 dB JL Audio C1-690 Manual

    2 Available for pickup

    $189.99

  • JL Audio C1-690tx : 6x9" Coaxial Speakers - 60W RMS 3-Way JL Audio C1-690tx : 6x9" Coaxial Speakers - 60W RMS 3-Way, front side.

    JL Audio C1-690tx : 6x9" Coaxial Speakers, 60W RMS 3-Way

    Pre-Order Today!

    C1-Series 6x9-Inch 60-Watt Coaxial Speaker System, 3-Way C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer adaptor rings are included allowing the C1-690tx to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690tx is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with dual true, edge-driven, aluminum dome tweeters, the C1-690tx stands apart from others in its category with superior high-frequency clarity and separation. The design of each tweeter delivers inherently excellent off-axis response and high-frequency extension. Both high-frequency drivers also benefit from the damping of silk surround suspensions and Ferrofluid in the voice coil gaps, along with the superior strength of neodymium magnetics. A true, mixed order filter network is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 36 Hz - 24 KHz ± 3 dB JL Audio C1-690tx Manual

    Pre-Order Today!

    $179.99

  • JL Audio C1-690x  : 6x9" Coaxial Speakers - 60W RMS JL Audio C1-690x  : 6x9" Coaxial Speakers - 60W RMS, front side.

    JL Audio C1-690x : 6x9" Coaxial Speakers, 60W RMS

    Pre-Order Today!

    C1-Series 6x9-Inch 60-Watt Coaxial Speaker System C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications. C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 10 - 100 W / Ch. System Efficiency 91.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 39 Hz - 22 KHz ± 3 dB JL Audio C1-690x Manual

    Pre-Order Today!

    $169.99

  • Kicker 47KSC6904 : Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS. Kicker 47KSC6904 : Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS, side view.

    Kicker 47KSC6904 : 6x9" 150W Coaxial Speakers

    Pre-Order Today!

    Six-by-Nine-Inch Coaxial Speaker Drivers, 150-Watt RMS The Kicker KS series 6x9-inch coaxial speakers come with custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 150 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Tweeter [in, mm] 1, 25 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-3/16, 81 Bottom Mount Depth [in,mm] 3-11/16, 93 Tweeter Protrusion [in,mm] 1/16, 1 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    Pre-Order Today!

    $159.99

  • Sale -$60.00 Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS Kicker 47KSC69304 : Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS, top side view.

    Kicker 47KSC69304 : 6x9" 150W 3-Way Coaxial Speakers - Discontinued

    2 Available for pickup

    Six-by-Nine-Inch 3-Way Coaxial Speaker Drivers, 150-Watt RMS The Kicker KS series 6x9-inch 3-way coaxial speakers come with custom bracketing options, built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations. KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 150 watts of recommended power. High power handling Tough rubber surrounds Thin-mount design easily fits behind factory grilles Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included Specifications Speaker Design 2-Way Woofer [in, mm] 6 x 9, 160 x 230 Midrange [in, mm] 1, 25 Tweeter [in, mm] 3/4, 20 Rated Impedance [Ω] 4 Recommended Amplifier Power [Watts RMS] 15-150 Sensitivity [1W, 1m] 92 Frequency Response [Hz] 30-21k Mounting Hole Diameter [in, mm] 5-11/16 x 8-7/16, 144 x 215 Top Mount Depth [in, mm] 3-1/8, 80 Bottom Mount Depth [in,mm] 3-5/8, 92 Tweeter Protrusion [in,mm] 3/16, 5 Grilles Yes Tweeter Magnet Material Neodymium Tweeter Dome Material Silk Woofer Cone Material Polypropylene Woofer Surround Material Rubber Kicker KS Series Coaxial Speaker Manual

    2 Available for pickup

    $189.99$129.99

  • 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 6x9" 3-Way Coaxial Speakers, 150W : Kicker 46CSC6934 shown with no grille.

    Kicker 46CSC6934 : 6x9" 3-Way Coaxial Speakers, 150W

    Pre-Order Today!

    150-Watt 6x9-Inch Coaxial Speakers, 4-Ohm These CS series 6x9" coaxial speakers by Kicker are a significant upgrade in your sound. A stamped-steel speaker driver chassis supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight. These 150W coaxial's have neodymium tweeter magnets allow for increased volume in high frequencies. These Kicker CS series 6 by 9" speakers work best with 150 watts of recommended power. Specifications Speaker Design 3 - way Woofer Size | in [mm] 6x9 [160x230] Mid Size | in [mm] 2 [50] Tweeter Size | in [mm] 1/2 [13] DC Resistance | ohm 3.5 Peak Power | Watts 450 Continuous Power | Watts, RMS 150 Sensitivity [SPLo] | dB @ 1W, 1m 92 Effective Frequency Range | Hz 30-20k Mounting Hole Diameter | in [mm] 5 5/8 x 8 7/16 [143x215] Top Mount Depth | in [mm] 7/16 [12] Bottom Mount Depth | in [mm] 3 3/16 [81] Tweeter Protrusion | in [mm] 1/16 [1] Grilles Yes Tweeter Magnet Material Electric Crystal Motor Tweeter Dome Material PEI [polyether imide] Tweeter Design Balanced dome Woofer Cone Material Polypropylene Woofer Surround Material Polyester foam Kicker CS Series Coaxial Speaker Manual

    Pre-Order Today!

    $129.99

  • Sale -$90.00Last One! Alpine S-S69C : 6x9" 85W RMS Component Speakers

    Alpine S-S69C : 6x9" 85W RMS Component Speakers 1/2 Box - Discontinued

    1 Available for pickup

    Alpine 6X9-Inch Component 2-Way Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Specifications 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround  CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

    1 Available for pickup

    $179.99$89.99

  • Sale -$45.00 Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers

    Alpine S-S69 : 6x9" 85W RMS Coaxial Speakers - Discontinued

    2 Available for pickup

    Alpine 6X9-Inch Coaxial 2-WAY Speakers, 85-Watt RMS The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection. Specificatons 85W RMS/260W Peak Nominal Impedance 4Ω Frequency Response: 65-22kHz 1” Silk Dome Tweeter CFRP (Carbon Fiber Reinforced Plastic) Cone H.A.M.R. Surround CustomStamped Steel Frame 35mm voice coil Optional grille sold separately (KTE-S69G)

    2 Available for pickup

    $129.99$84.99

  • Q-Power SB6x9BL : 6x9" Rhino Lined Speaker Boxes

    Q-Power SB6x9BL : 6x9" Rhino Lined Speaker Boxes

    Pre-Order Today!

    Pair of Single 6-Inch x 9-Inch Rhino Lined Speaker Enclosures Finished with Durable Bed Liner Universal Car, Truck, Marine or Off Road Application Sold in pairs Dimensions Height: 8.25" Width: 12" Depth: 5"

    Pre-Order Today!

    $42.99

  • Metra 82-8146 : 6"x9" Door Speaker Replacement Trim Ring, 2003-UP Subaru Toyota

    Metra 82-8146 : 6"x9" Door Speaker Replacement Trim Ring, 2003-UP Subaru Toyota

    2 Available for pickup

    Replacement Six-by-Nine-Inch Door Speaker Trim Ring Adapter for Select 2003-UP Subaru and Toyota Vehicles Accommodates 6X9 inch speaker – pair Front Speaker Applications LEXUS GX Series 2010-2014 GX Series 2003-2009 LS 460 2010-2012 LS 460 2007-2009 LS 600h L 2013-2014 LS 600h L 2010-2012 LS 600h L 2008-2009 LS Series 2013-2014 SUBARU Crosstrek 2018-2020 Impreza 2017-2020 Legacy 2015-2020 Outback 2018-2018 TOYOTA (Camry) Solara 2004-2008 4Runner 2015-2020 4Runner 2010-2014 4Runner 2003-2009 Avalon 2013-2014 Avalon 2011-2012 Avalon 2005-2010 Camry w/o JBL 2002-2011 FJ Cruiser 2007-2014 Highlander 2008-2012 Land Cruiser 2008-2014 Prius 2012-2015 Prius 2010-2011 Sequoia 2008-2014 Tacoma 2005-2015 Tundra 2014-2018 Tundra crew cab 2007-2013 Venza 2009-2015

    2 Available for pickup

    $24.99

  • Metra 82-3004 : 6x9" Door Speaker Replacement Trim Ring, 2014-UP Chevy GMC

    Metra 82-3004 : 6x9" Door Speaker Replacement Trim Ring, 2014-UP Chevy GMC

    2 Available for pickup

    Six-by-Nine-Inch Door-Speaker Replacement Adapter-Plates for Select 2014-UP Chevy and GMC Vehicles Vehicle specific spacer designed for installation of 6×9 inch aftermarket speakers Will work: front door speaker locations (Canyon/Colorado/Sierra/Silverado) rear deck (Malibu) One pair of adapters included in each package Front Speaker Applications BUICK Envision 2016-2020 CHEVEROLET Colorado Extended Cab 2015-2020 Colorado 4 door 2015-2020 Silverado Extended Cab 1500 2019-2023 Silverado Standard Cab 1500 2019-2023 Silverado Crew Cab 1500 2014-2018 Silverado Extended Cab - 1500 2014-2018 Silverado Standard Cab - 1500 2014-2018 Silverado Crew Cab - 1500 LD 2019-2019 Silverado Extended Cab - 1500 LD 2019-2019 Silverado Standard Cab - 1500 LD 2019-2019 Silverado Extended Cab - 2500 HD, 3500 HD 2020-2023 Silverado Standard Cab - 2500 HD, 3500 HD 2020-2023 Silverado Crew Cab - 2500HD, 3500HD, Chassis Cab 2015-2019 Silverado Extended Cab - 2500HD, 3500HD, Chassis Cab 2015-2019 Silverado Standard Cab - 2500HD, 3500HD, Chassis Cab 2015-2019 Suburban 2021-2023 Suburban 2015-2020 Tahoe 2015-2020 Traverse 2018-2020 Blazer 2019-2020 Silverado Crew Cab - 1500 2019-2023 Silverado Crew Cab - 2500 HD, 3500 HD 2020-2023 GMC Canyon Extended Cab 2015-2020 Canyon 4 door 2015-2020 Sierra / Sierra Denali Crew Cab - 1500 2014-2018 Sierra / Sierra Denali Extended Cab - 1500 2014-2018 Sierra / Sierra Denali Standard Cab - 1500 2014-2018 Sierra / Sierra Denali Crew Cab - 1500 Limited 2019-2019 Sierra / Sierra Denali Extended Cab - 1500 Limited 2019-2019 Sierra / Sierra Denali Standard Cab - 1500 Limited 2019-2019 Sierra / Sierra Denali Extended Cab - 2500 HD, 3500 HD, Chassis Cab 2015-2023 Sierra / Sierra Denali Standard Cab - 2500 HD, 3500 HD, Chassis Cab 2015-2023 Yukon / Yukon XL / Yukon Denali 2021-2023 Yukon / Yukon XL / Yukon Denali 2015-2020 Sierra / Sierra Denali Crew Cab - 1500 2019-2023 Sierra / Sierra Denali Extended Cab - 1500 2019-2023 Sierra / Sierra Denali Standard Cab - 1500 2019-2023 Sierra / Sierra Denali Crew Cab - 2500 HD, 3500 HD, Chassis Cab 2015-2023 Rear Speaker Applications CHEVEROLET Malibu 2016-2020

    2 Available for pickup

    $19.99

  • Metra 82-5606 : 6x9" Door Speaker Replacement Trim Ring, 2015-Up Ford F-Series

    Metra 82-5606 : 6x9" Door Speaker Replacement Trim Ring, 2015-Up Ford F-Series

    3 Available for pickup

    Replacement Six-by-Nine-Inch Door Speaker Adapter Plate for Select 2015-UP Ford F-Series Vehicles Accommodates 6×9 inch speaker Will work front door speaker locations Packaged as a pair Front Speaker Applications FORD Transit 2020-2020 F-150 2015-2022 F-250 / F-350 / F-450 / F-550 2017-2020

    3 Available for pickup

    $19.99

Login

Forgot your password?

Don't have an account yet?
Create account