Loaded Subwoofer Enclosure

W3-Series 500-Watt Amplified Dual 8-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 subwoofer drivers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (500 W @ 0.20 Ω)Nominal Impedance: 0.20 Ω Enclosure and Subwoofers Built in USA with global components. General Specifications Continuous Power Handling (RMS) Built-in amplifier 500 W @ 0.20 Ω System Nominal Impedance 0.20 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Signal Processing  Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 200 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (RBC-1) Physical Specifications External Width (W) 36.625 in / 905 mm External Height (H) 11.125 in / 283 mm External Depth (D1) 5.125 in / 130 mm Net Weight 34.9 lb / 15.83 kg JL Audio MicroSub+/PowerWedge+ Manual

Read more less

MicroSub-Series 8" Enclosed Dual 8-Inch 500-Watt Subwoofer System, 2Ω Ported Enclosure This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. Steel mesh grilles are included to protect the subwoofer drivers. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 - 500WNominal Impedance: 2 Ω General Specifications Continuous Power Handling (RMS) 500 W System Nominal Impedance 2 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications Net Weight 32.2 lb / 14.61 kg External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm JL Audio CP208LG-W3v3 Brochure

Read more less

From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK dual 8” Alpine Halo R-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A75M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  These ported subwoofer enclosures feature the next-generation 8” R-Series subwoofers with a more powerful motor that creates deeper bass while Alpine’s High Amplitude Multi-Roll (HAMR) surround technology allows the subwoofer cone to efficiently move air while staying cool for incredible accuracy. A new ceramic composite dust cap has higher heat resistance that ensures non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded R2-W8D2 8” R- Series subwoofers that are tuned to 36Hz, R2-DB8V-TRK is optimized to perform with Alpine’s R-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s R-Series R2-A75M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 750W RMS Frequency Response: 32Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire  Alpine R2-DB8V-TRK BrochureAlpine R2-DB8V-TRK Manual

Read more less

S-Series Dual Loaded 600-Watt 8-Inch 2-Ohm Subwoofer Enclosure for Select Jeep Wrangler-JL Gladiator-JT and other Pickup Vehicles From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new S-DB8V-TRK dual 8” Alpine Halo S-Series preloaded truck subwoofer enclosure with the ProLink system and amplifier space. The enclosures were intentionally crafted to fit most full-size trucks. Two 8” subwoofers are preloaded into a compact enclosure for under the seat installation and linked with a ProLink bracket that can adjust from 51”-40”. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine’s S-A60M Mono Power Amplifier (sold separately). Rubber “feet” are adjustable in height to accommodate uneven truck floors.  The enclosures are designed for the unique cabin environment of your truck. The ported subwoofer enclosures feature Alpine’s reliable 8” S-Series subwoofers. The subwoofers are designed with an improved voice coil that brings out the full potential of the subwoofer. The custom-stamped steel frame is designed to withstand the rigors of the strong S-Series motor. Frame leg vents, as well as a vented backplate, keep the subwoofer cool for non-stop bass performance. Alpine’s new preloaded truck subwoofer enclosures join the Alpine Halo family with a premium, unmistakable design. The enclosure pulls design cues from the Alpine Halo display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. The 5/8” MDF enclosures are covered in a premium black carpet that will elevate the look of your truck. With two preloaded S-W8D2 8” S- Series subwoofers that are tuned to 36Hz, the S-DB8V-TRK is optimized to perform with Alpine’s S-Series sound system line. Dual voice coils are wired in parallel for a 2Ω load that’s compatible with Alpine’s S-Series S-A60M mono power amplifier. Features Groundbreaking Alpine Halo Design  ProLink™ Ported Enclosure Expandable Width from 40" to 51"  Compact, Under-the-Seat Installation in Most Full-Size Trucks Integrated Amplifier Tray (not applicable with all vehicles) Rubber, Modular Stackable Foot Design Accommodates Uneven Truck Floor Areas Ported Enclosures with High-Performance S-Series Subwoofers   Front Link Alpine Branded Bracket Side-Firing Cabin Loading Ports Premium Alpine Wire Terminals CARB Compliant 5/8" MDF Construction  Premium Black Carpet  Specifications Dimensions: 40"-51" (Adjustable Width) x 8-3/4” (H) x 13-3/4” (D) 600W RMS Frequency Response: 34Hz-200Hz  Sensitivity: 84dB  Dual voice coils Wired in Parallel for a 2Ω Load (Compatible with S-A60M) Vented Enclosure Tuning Frequency: 36Hz   Custom spring-loaded speaker terminals fit up to 12AWG speaker wire Alpine S-DB8V-TRK BrochureAlpine S-DB8V-TRK Manual

Read more less

The PWD-X5’s subwoofer increases the sound system’s overall bass output and when the product is installed under the front seat, it brings the sound stage forward in the vehicle for the best bass and imaging experience. With 165-watts available to the subwoofer and 25-watts x 4 to the speakers, this all-in-one solution lets you create a truly enjoyable and customizable sound experience in just about any in-vehicle cabin space. The PWD-X5 can also be used in non-traditional ways thanks to the Bluetooth® streaming capabilities. In situations where the car radio cannot be replaced, such as in a classic car, music can be streamed to the PWD-X5’s Bluetooth® connection then played through the car’s speakers while utilizing the PWD-X5’s bass and amplified power. If a head unit does not exist, such as on a motorcycle or a side-by-side, the music streamed from a smartphone to the PWD-X5’s Bluetooth® connection is used as the vehicle’s music source.  Specifications 25W x 4 +165W RMS 50W x 4 +240W Peak 4 RCA/Speaker Level Inputs 10-Band Parametric EQ Digital Time Correction Bluetooth Signal Inputs Remote Commander Included OS/Android and Desktop PC Tuning Software 13-13/16” x 9-11/16” x 3-3/16” CES 2019 Innovations Award Winner Alpine PWD-X5 Manual

Read more less

W3-Series 250-Watt Amplified 8-Inch Ported Subwoofer System With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL Audio's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 8Wv3 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Amplifier power: Built-in DCD™ Class D amplifier (250 W @ 0.40 Ω)Nominal Impedance: 0.40 Ω Enclosure and Subwoofer Built in USA with global components.

 General Specifications Continuous Power Handling (RMS) Built-in amplifier 250 W @ 0.40 Ω System Nominal Impedance 0.40 Ω Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS Recommended Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (ATO or ATC) Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh JL Audio MicroSub+/PowerWedge+ Manual

Read more less

MicroSub-Series 8-Inch 250-Watt Enclosed Subwoofer System, 4Ω Ported Enclosure  This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 250WNominal Impedance: 4 Ω General Specifications Continuous Power Handling (RMS) 250 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh Physical Specifications External Width (W) 18.625 in / 473 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm Net Weight 17.40 lb / 7.89 kg JL Audio CP108LG-W3v3 Brochure

Read more less

The compact PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle. With the PWE-S8, the high-excursion 8-inch subwoofer and 120W gives strong bass output. Specifications RCA and speaker level inputs 120 Watt amp Frequency Response: 25Hz-152Hz Dimensions 13- 7/16" Wide x 9-1/16" Long x 2-13/16" Deep Alpine PWE-S8 Manual

Read more less

Eight-Inch Loaded Marine Subwoofer Enclosure, 300-Watt, 2Ω or 4Ω Final Impedance This weatherproof TB-Series subwoofer system by Kicker delivers serious bump from any corner of your trunk, behind your truck’s seat, or even in your boat or side-by-side. Surprisingly loud, the TB subs give you the bump you want without losing the space you need. Comes with a thick ABS tube construction, a flexible horizontal or vertical mounting system and spring-loaded speaker terminals. Sub-driver Grilles Included. The marine grade Kicker 46CWTB82 and 46CWTB84 8-Inch loaded subwoofer enclosures works best with 300-watts of amplified power. Specifications Type Reflex Size (in., cm) 8, 20 Impedance (ohms) 2 Power Watts (peak/RMS) 600/300 Sensitivity (dB 1w/1m) 84.4 Box Bottom Depth (in, cm) 12-7/8, 32.8 Box Height (in, cm) Vert. Mount: 13-7/16, 34.1; Horiz. Mount: 8-5/8, 21.9 Box Width (in, cm) 8-1/2, 21.6 What's in the Box: 1 - Enclosure assembly2 - Vertical mounting brackets1 - Horizontal mount base1 - Horizontal mount hook(retainer)1 - Horizontal mount plate(retaining clamp)7 - stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure11 - nylon flat washers (to be used on all mounting fasteners)4 - stainless steel pan head phillips M4 x 25mm (for mount base to vehicle)1 - owner’s manual2 - Kicker stickers Kicker CWTB Subwoofer Enclosure Manual

Read more less

8-Inch Thin Loaded Subwoofer Enclosure, 350-Watt RMS, 2-Ohm or 4-Ohm Impedance Barely six inches deep, the KICKER TL7T 8-Inch Subwoofer Enclosure is perfect for big bass under or behind your seats. Genuine Kicker L7T subwoofer included Angled design for excellent fit Heavy internal bracing Single 2-Ohm or 4-Ohm terminal Easy to install and wire Thick black carpeting Rounded corners Embroidered Kicker logo Thick MDF construction Specifications Woofer [in, cm] Solo-Baric L7T 8" 2Ω or 4 Ω Impedance [Ohms] 2 or 4 Recommended Amplifier Power [watts RMS] 350 Sensitivity [dB 1w/1m] 84.835 Box Top Depth (in, cm): 3-5/8, 9.2 Box Bottom Depth (in, cm): 6-1/4, 16 Box Height (in, cm): 11-1/4, 28.5 Box Width (in, cm): 19-5/8, 50 What's in the box? one loaded enclosure with one 8-inch subwoofermounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)one owner's manualtwo stickers Kicker L7T Subwoofer Enclosure Manual

Read more less

Dual 8-Inch Thin Subwoofer Enclosure, 300-Watt RMS, 2-Ohm The Kicker CompRT series down-firing 8-inch subwoofer enclosure comes loaded with a passive reFLEX™ subwoofer and Kicker CompRT sub, then carpeted and loaded with a single 2Ω terminal.  Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. The TRTP 8-inch subwoofer enclosure works best with 300-watts of recommended power. Specifications TYPE: thin-profile WOOFER SIZE (in, cm): 8, 20 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY (dB 1w/1m): 85.5 BOX TOP DEPTH (in, cm): 12-1/4, 31 BOX BOTTOM DEPTH (in, cm): 12-1/4, 31 BOX HEIGHT (in, cm): 5-3/8, 13.8 BOX WIDTH (in, cm): 23-5/8, 60 Kicker TRTP Subwoofer Enclosure Manual

Read more less

8-Inch 300-Watt Loaded Dual Thin Subwoofer Enclosure, 2-Ohm Final Impedance The CompRT Thin Profile 8-Inch subwoofer enclosure comes loaded with a Reflex subwoofer and RT sub, then carpeted and loaded with a single 2Ω terminal. Covered in sleek black carpeting and built with stout MDF construction & rounded corners, these tough enclosures take plenty of power, yet fit nearly anywhere. The Kicker 43TCWRT82 enclosure works best with 300 watts of RMS power. Specifications TYPE: thin-profile NO. OF WOOFERS/SIZE (in, cm): 8, 20 IMPEDANCE (Ohms): 2 Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY (dB 1w/1m): 85.5 BOX TOP DEPTH (in, cm): 3 9/16, 9 BOX BOTTOM DEPTH (in, cm): 6 7/16, 16.4 BOX HEIGHT (in, cm): 11 13/16, 39 BOX WIDTH (in, cm): 19-5/16, 49 Kicker CompRT Subwoofer Enclosure Manual

Read more less