Subwoofer and Speaker Drivers Searchable by Driver Mounting Depth
Mounting Depth
![Skar Audio EVL-65 : 200W 6.5" Subwoofer Driver, side view.]()
Skar Audio EVL-65 : 200W 6.5" Subwoofer Driver, Dual Voice Coil
EVL Series 6-1/2-Inch 200-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil The Skar Audio EVL-65 D2 subwoofer was designed to be the most responsive, powerful, and efficient 6.5 inch subwoofer on the market. Don't be fooled by the size, the EVL-65 is one monster of a subwoofer, featuring a 4-layer 2" pure copper voice coil, and a powerful 39 Oz single slug ferrite motor. The small size of this driver allows it to be very versatile, as it can be used in a variety of applications where adding a woofer might not otherwise be possible. Conservatively rated at 200 watts RMS Power, and 400 watts max power, the EVL-65 features an aluminum diecast chassis which utilizes an advanced air flow cooling system to help dissipate heat. The suspension design of this subwoofer is highlighted by its unique yellow spider - which connects to the coil former with premium stitched lead wires. All of these incredible features make the EVL-65 the obvious choice when looking for a versatile 6.5-inch car subwoofer. Specifications Size 6.5" Type Car Subwoofer Cone Type Competition Grade Pressed Paper Cone RMS Power 200 Watts Peak Power 400 Watts Surround Type High Roll Rubber Surround Voice Coil Size 2.00" Magnet Slug Count Single Voice Coil Layers 4 Voice Coil Material Black Coated Copper (Pure Copper) Voice Coil Impedance Dual 2 Ω T/S Parameters Bl 13.0 n/a Fs 61.0 Hz Re Dual 2 Ω Sd 113.0 cm2 Cms 0.126 mm/N Mms 52.8 gr Qes 0.43 Qms 4.48 Qts 0.39 Vas 2.3 L Nref 0.12% Xmax 6.25 mm (one-way) Sensitvity 83.1 dB
$109.99
-
![JL Audio SB-TE-YG1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2020-UP Tesla Model Y, shown installed.]()
JL Audio SB-TE-YG1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2020-UP Tesla Model Y
Single 10-Inch 300-Watt Subwoofer-Enclosure for Select 2020-Up Tesla Model-Y Vehicles Tesla’s popular compact crossover delivers quick acceleration and a roomy cabin with plenty of space for both passengers and cargo. Sadly though, the factory audio options offer very little to satisfy in the bass reproduction department. Featuring an all-fiberglass, custom-formed, sealed enclosure, this Stealthbox houses JL Audio's innovative, 10-inch TW1 thin-line subwoofer. Designed to drop into the driver’s side, rear storage compartment, this Stealthbox solution produces amazing amounts of deep bass output, while practically vanishing into its surroundings.The Hard Data: Contains one 10TW1-2 Subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Fits two-row, 5-seat vehicles only. Use of driver's side, rear storage compartment is lost with installation. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-TE-YG1-10TW1 Installation Manual
$1,199.99
-
![JL Audio SB-TE-3G1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2017-UP Tesla Model 3, shown installed.]()
JL Audio SB-TE-3G1-10TW1 : 10" 300W 2Ω Thin Subwoofer Enclosure, 2017-2023 Tesla Model 3
Single 10-Inch 300-Watt 2-Ohm Subwoofer-Enclosure for Select 2017-2023 Tesla Model-3 Vehicles Tesla’s electric, midsize sedan offers a fun driving experience with athletic handling and remarkable acceleration potential. Unfortunately, the factory audio systems are unable to produce enough bass to match its performance capabilities. Constructed from 100% fiberglass, this Stealthbox houses a 10-inch TW1 thin-line driver in a custom-formed, sealed enclosure. Engineered to address the Model 3’s vault-like, sealed trunk design, this Stealthbox is suspended above the floor, mounted within the rear deck, and generates astonishing amounts of bass output, without sacrificing any precious cargo space.The Hard Data: Contains one 10TW1-2 Subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs within the rear deck and requires permanent modification to the rear deck and to the interior rear deck panel. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-TE-3G1-10TW1 Installation Manual
$1,299.99
-
![JL Audio SB-F-EXPED4G/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, shown installed.]()
JL Audio SB-F-EXPED4G/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2018-UP Expedition
Single 300-Watt 2-Ohm Thin 10-Inch Stealthbox Subwoofer-Enclosure for Select 2018-Up Ford Expedition Vehicles, with OEM Subwoofer Ford's full-sized SUV delivers first-rate comfort with outstanding gear-hauling capability and towing capacity. This is why JL's Stealthbox solution is designed to retain 100% of your cargo space, while delivering first-class bass performance. This model replaces the stock subwoofer and installs discreetly behind the factory cargo area trim to protect and hide its 10-inch subwoofer. The Hard Data: Contains one 10TW1-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs behind driver side panel in the cargo area. Requires removal of the OEM "subwoofer". Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-EXPED4G/10TW1 Installation Manual
$1,399.99
-
![JL Audio 13W3v3 : 600W 13" Subwoofer Driver, back side.]()
JL Audio 13W3v3 : 600W 13" Subwoofer Driver, 2Ω or 4Ω Single Voice Coil
W3-Series 13-Inch 600-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Single Voice Coil If you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels. As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability. The 13W3v3 2Ω or 4Ω model is best used with an amplifier powered in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. General Specifications Continuous Power Handling (RMS) 600W Recommended Amplifier Power (RMS) 150 - 600W Nominal Impedance (Znom) 4Ω Nominal Diameter 13.5 in / 345 mm Overall Diameter (A) 14.0 in / 356 mm Mounting Hole Diameter (B) 12.5625 in / 319 mm Bolt Hole Circle Diameter (C) 13.2 in / 335 mm Motor Outer Diameter (D) 5.79 in / 147 mm Mounting Depth (E) 7.63 in / 194 mm Driver Displacement 0.096 cu ft / 2.72 liters Net Weight 17.75 lb / 8.05 kg Free Air Resonance (Fs) 23.66 Hz Electrical “Q” (Qes) 0.465 Mechanical “Q” (Qms) 6.774 Total Speaker “Q” (Qts) 0.435 Equivalent Compliance (Vas) 4.793 cu ft / 135.74 L One-Way Linear Excursion (Xmax)* 0.610 in / 15.5 mm Reference Efficiency (no) 0.37% Efficiency (1 W / 1 m)** 87.90 dB SPL Effective Piston Area (Sd) 103.850 sq in / 0.0670 sq m DC Resistance (Re) 3.569 Ω JL Audio 13W3v3 Manual
$499.99
-
![JL Audio C3-525cw : C3 5.25" Component Woofer, shown with tweeter adapter.]()
JL Audio C3-525cw : C3 5.25" Component Woofer, 75W RMS
C3-Series 5.25-Inch 75-Watt Component Woofer with Grille There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-525cw is a 5.25-inch (130 mm) component woofer with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold individually. Includes Component Phase Plug and Tweeter Post (Tweeter sold separately). General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB Physical Specifications Frame Outer Diameter* (A) 5.80 in / 147 mm Grille Tray Outer Diameter (B) 6.00 in / 152 mm Motor Outer Diameter** (C) 3.38 in / 86 mm Frontal Coaxial Tweeter Protrusion*** (D) 0.69 in / 18 mm Frontal Grille Protrusion**** (E) 1.00 in / 25 mm Mounting Hole Diameter (F) 4.56 in / 116 mm Mounting Depth (G) 2.27 in / 58 mm JL Audio C3-525cw Manual
$179.99
-
![JL Audio C3-570cw : C3 5x7" Component Woofer, shown with tweeter adapter.]()
JL Audio C3-570cw : C3 5x7" Component Woofer, 75W RMS
C3-Series 5x7-Inch 75-Watt Component Woofer with Grille There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems. The C3-570cw is a 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofer with oversized 1.2-inch (30.5 mm) voice coil, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. Woofer grilles are not available for this product. Sonic character: Clean and Powerful Sold individually. Includes Component Phase Plug and Tweeter Post (Tweeter sold separately). General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB Physical Specifications Frame Outer Diameter* (A) 5.52 x 7.68 in / 140 x 195 mm Grille Tray Outer Diameter (B) N/A Motor Outer Diameter (C) 4.08 in / 104 mm Frontal Coaxial Tweeter Protrusion** (D) 0.78 in / 20 mm Frontal Grille Protrusion (E) N/A Mounting Hole Diameter (F) N/A Mounting Depth (G) 2.52 in / 64 mm JL Audio C3-570cw Manual
$179.99
-
![JL Audio C3-600cw : C3 6" Component Woofer, 75W RMS]()
JL Audio C3-600cw : C3 6" Component Woofer, 75W RMS
C3-Series 6-Inch 75-Watt Component Woofer with Grille There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The new C3-600cw expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker. The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. A woofer grille is included, consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold individually. Includes Component Phase Plug and Tweeter Post (Tweeter sold separately). General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 50 Hz - 25 KHz ± 3 dB Physical Specifications Frame Outer Diameter (A) 6.21 in. / 157.7 mm Grille Tray Outer Diameter (B) 6.46 in. / 164.1 mm Motor Outer Diameter (C) 4.08 in. / 103.6 mm Frontal Coaxial Tweeter Protrusion* (D) 0.81 in. / 20.6 mm Frontal Grille Protrusion** (E) 1.03 in. / 26.2 mm Mounting Hole Diameter (F) 5.00 in. / 127 mm Mounting Depth (G) 2.49 in. / 63 mm JL Audio C3-600cw Manual
$179.99
-
![JL Audio C3-650cw : C3 6.5" Component Woofer, 75W RMS]()
JL Audio C3-650cw : C3 6.5" Component Woofer, 75W RMS
C3-Series 6.5-Inch 75-Watt Component Woofer with Grille There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650cw is a 6.5-inch (165 mm) component woofer with an oversized 1.2-inch (30.5 mm) voice coil, mineral-filled polypropylene cone and injection-molded polymer basket. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. A woofer grille is included, consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold individually. Includes Component Phase Plug and Tweeter Post (Tweeter sold separately). General Specifications Continuous Power Handling (RMS) 60 W Peak Music Power 150 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 6 KHz ± 3 dB Physical Specifications Frame Outer Diameter (A) 6.50 in / 165 mm Grille Tray Outer Diameter (B) 6.74 in / 171 mm Motor Outer Diameter (C) 4.08 in / 104 mm Frontal Coaxial Tweeter Protrusion* (D) 0.75 in / 19 mm Frontal Grille Protrusion** (E) 1.03 in / 26 mm Mounting Hole Diameter (F) 5.56 in / 141 mm Mounting Depth (G) 2.55 in / 65 mm JL Audio C3-650cw Manual
$179.99
-
![Alpine R2-W8D : 350W 8" Subwoofer Driver, top view.]()
Alpine R2-W8D : 350W 8" Subwoofer Driver, Dual Voice Coil
R-Series 8-Inch 350-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W8D2 and R2-W8D4 is compatible with the KTE-8G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap Kevlar Reinforced Pulp Cone High-Performance subwoofers Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Large Double-Stacked Magnets Specifications 350W RMS 1000W Peak Power Handling Frequency Response: 30Hz-200Hz Sensitivity (1W/1m): 83.5dB Nominal Impedance: 4Ω Voice Coil: 35mm X-Max: 12mm Magnet Weight: 56oz Mounting Depth: 4-3/8” (118mm) Cutout Size: 6-15/16” (176mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant Alpine R2-W8D Manual
$249.99
-
![Alpine R2-W10D : 750W 10" Subwoofer Driver, top side.]()
Alpine R2-W10D : 750W 10" Subwoofer Driver, Dual Voice Coil
R-Series 10-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W10D2 and R2-W10D4 is compatible with the KTE-10G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap Kevlar Reinforced Pulp Cone High-Performance subwoofers Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Large Double-Stacked Magnets Specifications 750W RMS 2250W Peak Power Handling Frequency Response: 26Hz-200Hz Sensitivity (1W/1m): 82.4dB Nominal Impedance: 4Ω Voice Coil: 65mm X-Max: 20mm Magnet Weight: 123oz Mounting Depth: 6” (152mm) Cutout Size: 9-1/16” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant Alpine R2-W10D Manual
$329.99
-
![Alpine R2-W12D : 750W 12" Subwoofer Driver, front view.]()
Alpine R2-W12D : 750W 12" Subwoofer Driver, Dual Voice Coil
R-Series 12-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W12D2 and R2-W12D4 is compatible with the KTE-12G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap Kevlar Reinforced Pulp Cone High-Performance subwoofers Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Large Double-Stacked Magnets Specifications 750W RMS 2250W Peak Power Handling Frequency Response: 24Hz-200Hz Sensitivity (1W/1m): 84.5dB Nominal Impedance: 4Ω Voice Coil: 65mm X-Max: 20mm Magnet Weight: 144oz Mounting Depth: 6-1/2” (152mm) Cutout Size: 10-7/8” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant Alpine R2-W12D Manual
$379.99
-
![Alpine R2-S69C : 6x9" Component Door Speaker System, woofer and tweeter.]()
Alpine R2-S69C : 6x9" Component Door Speaker System, 100W RMS
Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applic The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S69 is a standard coaxial speaker set that includes a 6x9” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone Die-Cast Aluminum Basket Ferrite Magnet Structure High-Amplitude Multi-Roll (H.A.M.R.) Surround 2 Premium-Grade Full Passive Performance Crossover Networks Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing Protective Open Mesh Grille Pair Included Specifications 6x9” Mid-Bass with 1” Tweeter Frequency Response: 60Hz -40kHz Power Handling: 100W RMS / 300W Peak
$349.99
-
![Alpine R2-S69 : 6x9" Coaxial Door Speaker System, woofer.]()
Alpine R2-S69 : 6x9" Coaxial Door Speaker System, 100W RMS
Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S69 is a standard coaxial speaker set that includes a 6x9” Mid-Range and 1” Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone Die-Cast Aluminum Basket Ferrite Magnet Structure High-Amplitude Multi-Roll (H.A.M.R.) Surround 2 Premium-Grade Full Passive Performance Crossover Networks Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing Protective Open Mesh Grille Pair Included Specifications 6x9” Mid-Bass with 1” Tweeter Frequency Response: 60Hz -40kHz Power Handling: 100W RMS / 300W Peak
$299.99
-
![Alpine R2-S652 : 6.5" PRO Component Door Speaker System, woofer and tweeter.]()
Alpine R2-S652 : 6.5" PRO Component Door Speaker System, 100W RMS
Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The Next-Generation R-Series speakers now come in upgraded 'Pro' models in addition to the standard model lineup. The pro models utilize a highly rigid, die-cast aluminum basket that eliminates flexing and resonance during playback to ensure the highest quality sound performance. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. Magnesium, hard-dome tweeters contribute to the “loud and fun” R-series sound signature and feature a swivel- mount design for optimal listening positioning and threaded removable housing for flexible factory applications. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S652 is a standard component speaker set that includes a 6.5” Mid-Range and 1” Tweeter with an outboard crossover network the professional installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone Die-Cast Aluminum Basket Ferrite Magnet Structure High-Amplitude Multi-Roll (H.A.M.R.) Surround 2 Premium-Grade Full Passive Performance Crossover Networks Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing Protective Open Mesh Grille Pair Included Specifications 6.5” Mid-Bass with 1” Tweeter Frequency Response: 65Hz -40kHz Power Handling: 100W RMS / 300W Peak
$399.99
-
![Alpine R2-S65 : 6.5" Coaxial Door Speaker System, woofer.]()
Alpine R2-S65 : 6.5" Coaxial Door Speaker System, 100W RMS
Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status systems, the Next-Generation R-Series Speakers are Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The new lightweight and rigid glass fiber-reinforced cone material allows for extreme movement and low distortion which results in an incredibly accurate and clean sound during playback. The Next-Generation R-Series speakers utilize a ferrite magnet, different from the neodymium from previous generations, and a larger motor structure that contributes to more mid-bass during the playback. Despite the larger motor structure, the speakers still maintain the same depth for easy installation. Continuing with the Next-Generation R-Series speaker line is Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology that increased excursions while maintaining linearity for more accurate music reproduction. The Next-Generation R-Series speaker line offers two pathways for performance: the “Pro” and “Standard” models. The R2-S65 is a standard coaxial speaker set that includes a 6.5” Mid-Range and 1” Coaxial Tweeter with a flexible in-line crossover network that simplifies installation. Sold as a pair. Features Hi-Res Audio Certified Glass Fiber Reinforced Cone Ferrite Magnet Structure High-Amplitude Multi-Roll (H.A.M.R.) Surround 2 Premium-Grade Crossover Networks Magnesium Hard-Dome Tweeters with Swivel Mount Design and Threaded Removable Housing Protective Open Mesh Grille Pair Included Specifications 6.5” Mid-Bass with 1” Tweeter Frequency Response: 65Hz -40kHz Power Handling: 100W RMS / 300W Peak
$249.99
-
![Alpine HDZ-653S : 6.5" 3-Way Slim-Fit Component Door Speakers, woofers.]()
Alpine HDZ-653S : 6.5" 3-Way Slim-Fit Component Door Speakers, 100W RMS
Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-653S features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-653S has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-653S is a custom-fit model that includes a 6.5- inch Mid-Bass driver, a 3.5-inch Midrange driver, and 1.25-inch High-Range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material Alpine Proprietary Double Gathered Edge Surround 6.5” Mid-Bass Driver (16.5cm) 3.5" Midrange Driver (8.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-653S Manual
$999.99
-
![Alpine HDZ-653 : 6.5" 3-Way Component Door Speakers, woofers.]()
Alpine HDZ-653 : 6.5" 3-Way Component Door Speakers, 100W RMS
Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-653 features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-653 has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-653 is a custom-fit model that includes a 6.5- inch Mid-Bass driver, a 3.5-inch Midrange driver, and 1.25-inch High-Range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material Alpine Proprietary Double Gathered Edge Surround 6.5” Mid-Bass Driver (16.5cm) 3.5" Midrange Driver (8.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-653 Manual
$999.99
-
![Alpine HDZ-65CS : 6.5" Slim-Fit Component Door Speakers, woofers.]()
Alpine HDZ-65CS : 6.5" Slim-Fit Component Door Speakers, 100W RMS
Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-65CS features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-65CS has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-65CS is a factory-fit model that includes a 6.5-inch mid-bass driver and a 1-inch coaxial high-range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material Alpine Proprietary Double Gathered Edge Surround 6.5” Mid-Bass Driver (16.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-65CS Manual
$749.99
-
![Alpine HDZ-65C : 6.5" Component Door Speakers, tweeters.]()
Alpine HDZ-65C : 6.5" Component Door Speakers, 100W RMS
Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest-quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-65C features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-65C has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-65C is a factory-fit model that includes a 6.5-inch mid-bass driver and a 1-inch coaxial high-range driver. The Alpine Status System is soldseparately and can be used to build acustom sound system. Three sets of true4V preamp outputs are included to add needed. For best results, install the additional amplifiers if more power iscomplete Alpine Status system togetheras a full system to achieve the highestin-class audio performance only second to the Ultra Hi-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material Alpine Proprietary Double Gathered Edge Surround 6.5” Mid-Bass Driver (16.5cm) 1.25” High Range Driver (3.2cm) Specifications 100W RMS 300W Peak Power Handling Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-65C Manual
$749.99
-
![Alpine HDZ-65 : 6.5" Coaxial Door Speakers, top side view.]()
Alpine HDZ-65 : 6.5" Coaxial Door Speakers, 100W RMS
Using expertise gleaned from over five decades of crafting premium car audio products and trickle-down engineering and design from the Ultra Hi-Res AlpineF#1Status system technologies, the Alpine Status system features exceptional tooling and rich build quality for the best possible sound reproduction. Each component was hand-picked from the highest- quality materials for the highest in-class audio performance, that when used as a complete system, can achieve 192kHz/24bit playback. Drawing inspiration from the AlpineF#1Status system, the HDZ-65 features a unified carbon composite cone construction throughout the speaker components for a unified timbre identity. Alpine Proprietary Double Gathered Edge Surround technology gives the speakers ultra-low distortion and linear diaphragm movement that reproduces music true to the artist’s original intentions. Custom developed for Hi-Res Audio Playback, the HDZ-65 has an ultra-wide bandwidth of 55Hz-40kHz which is perfectly suited for accurate reproduction of even the highest quality of studio recordings. Each speaker component is designed to cover a wider range of playback spectrum giving the tuner a wider range of adjustability. The Alpine Status speaker line features two fitments for flexible installation options including a custom-fix model for custom applications and factory-fit models that were intentionally designed to fit into most factory speaker holes without custom work. The HDZ-65 is a factory-fit model that includes a 6.5-inch mid-bass driver and a 1-inch coaxial high-range driver. The Alpine Status System is sold separately and can be used to build a custom sound system. Three sets of true 4V preamp outputs are included to add additional amplifiers if more power is needed. For best results, install the complete Alpine Status system together as a full system to achieve the highest in-class audio performance only second to the Ultra High-Resolution AlpineF#1System. Features Hi-Res Audio Playback (192kHz/24Bit) w/full Alpine Status system Carbon Composite Diaphragm Material Alpine Proprietary Double Gathered Edge Surround 6.5” Mid-Bass Driver (16.5cm) 1” Coaxial Tweeter (2.5cm) Specifications 100W RMS 300W Peak Power Handling Frequency response: 55Hz – 40kHz Sensitivity: 88dB Sold by the Pair Alpine HDZ-65 Manual
$549.99
-
![JL Audio SB-GM-5GSUV/10TW3 : Single 10" 400W Subwoofer Enclosure @ 2Ω, shown installed.]()
JL Audio SB-GM-5GSUV/10TW3 : Single 10" 400W Subwoofer Enclosure @ 2Ω, 2021-UP Chevy GMC Large SUV's
Single 10-Inch 2-Ohm 400-Watt Subwoofer-Enclosure for Select 2021-UP Large Chevrolet and GMC SUV Vehicles GM's fifth-generation full-size SUV gets all-new, luxurious interiors, along with major enhancements in performance and technology. Unfortunately, the factory audio systems still lack quality bass reproduction. There also isn’t much room for a conventional subwoofer design, without compromising people and cargo space. To overcome this challenge, JL-Audio engineers developed a subwoofer solution that installs invisibly, behind the driver's side cargo panel, with no loss of storage space. Featuring 100% fiberglass construction, this Stealthbox is equipped with one of JL's innovative, 10-inch TW3 thin-line subwoofers in a custom-formed, sealed enclosure. The Hard Data: Contains one 10TW3-D4 in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Stealthbox® installs behind the driver side cargo trim panel. Replaces the OEM “subwoofer” system, if equipped. Applications Escalade Escalade ESV Suburban Tahoe Yukon Yukon XL Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-5GSUV/10TW3 Installation Manual
$1,299.99
-
![JL Audio SB-D-5GRAMQC/10TW3 : Dual 10" 800W Subwoofer Enclosure @ 2Ω, cutaway view.]()
JL Audio SB-D-5GRAMQC/10TW3 : Dual 10" 800W Subwoofer Enclosure @ 2Ω, 2020-UP Ram 1500 (Quad Cab)
Dual 10-Inch 2-Ohm 800-Watt Subwoofer-Enclosure for Select 2020-UP RAM 1500 Quad-Cab Vehicles This generation of RAM’s big hauler combines a bold new design with major advancements in aerodynamics, technology and towing capabilities. Disappointingly, the original equipment audio systems lack the low-frequency output and performance you might expect. Luckily, JL-Audio engineers are experts in maximizing bass from minimal space and developed a subwoofer solution that fills your Quad Cab with loads of powerful bass output. Featuring a 100% fiberglass, sealed enclosure design, this Stealthbox houses two of JL-Audio's innovative 10TW3 thin-line subwoofers and installs neatly under the rear seat, without compromising rear seat comfort or folding. Theyeven left space on the enclosure that’s perfect for a small, hidden amplifier installation! The Hard Data: Contains two 10TW3-D8 Subwoofers in a sealed enclosure. 800 watt power handling. Wired for 2 ohm mono. Installation requires removal of rear underseat storage tray, if equipped. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-5GRAMQC/10TW3 Manual
$2,199.99
-
![JL Audio SB-F-RNGSCG4/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, installed.]()
JL Audio SB-F-RNGSCG4/10TW1 : 10" 300W Subwoofer Enclosure @ 2Ω, 2019-UP Ford Ranger (SuperCrew Cab)
Single 10-Inch 2-Ohm 300-Watt Subwoofer-Enclosure for Select 2019-UP Ford-Ranger SuperCrew Vehicles Ford's mid-sized pickup promises practical utility and performance for everyday commutes or rugged terrains. To make every drive even more enjoyable, JL-Audio's Stealthbox solution tucks under the rear seat on the passenger side and encloses a 10-inch driver for impressive sub-bass performance. Seat folding is unaffected with plenty of room remaining on the driver side for storage. Best of all, the Stealthbox virtually disappears once installed. The Hard Data: Contains one 10TW1-2 subwoofer in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Installs under passenger side rear seat in place of storage compartment. Will not fit SuperCab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-RNGSCG4/10TW1 Manual
$1,099.99
-
![JL Audio SB-T-4RNRG5/10TW3 : 10" 400W Subwoofer Enclosure, installed.]()
JL Audio SB-T-4RNRG5/10TW3 : 10" 400W Subwoofer Enclosure @ 2Ω, 2010-UP 4Runner
Single 10-Inch 2-Ohm 400-Watt Subwoofer-Enclosure for Select 2010-UP Toyota 4Runner Vehicles The 5th Generation 4Runner has been long-overdue for a Stealthbox solution. When JL finally approached the challenge, thy knew 4Runner owners cared about the vehicle's cargo space and JL-Audio didn't want to interfere with OEM cargo slides or aftermarket cargo drawer systems. The result is the addition of a spectacular 400 watt, 10-inch subwoofer solution tucked nicely behind the factory cargo panel. The Hard Data: Contains one 10TW3-D4 subwoofer in a sealed enclosure. 400 watt power handling. Wired for 2 ohm mono. Installs behind factory panel in the passenger side rear cargo area. Subwoofer is protected by the included black steel mesh grille and concealed by a fabric grille. Installation requires permanent modification to the factory panel. Installation in models equipped with an "OEM" subwoofer require purchase of a standard factory panel from Toyota Parts. Will not fit models with third row seating. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-T-4RNRG5/10TW3 Installation Manual
$1,699.99
-
![JL Audio SB-GM-4GSUVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2015-2020 Escalade Suburban Tahoe Yukon (with Bucket Seats)]()
JL Audio SB-GM-4GSUVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2015-2020 Escalade Suburban Tahoe Yukon (with Bucket Seats)
Single 10-Inch Thin 300-Watt Subwoofer-Enclosure for Select 2015-2020 Cadillac-Escalade, Chevy-Suburban, Chevy-Tahoe and GMC-Yukon Vehicles, with front bucket-seats and factory center-console The fourth generation full-size SUV from GM gets all-new, luxurious interiors, along with major enhancements in performance and technology. Unfortunately, the stock audio systems continue a track record of weak bass reproduction. There also isn’t much room for a conventional subwoofer design, without compromising people and cargo space. To neatly solve this problem, JL's engineers have designed a subwoofer solution that installs invisibly, inside the factory console, with zero loss of console storage space. Featuring 100% fiberglass construction, this Stealthbox® is equipped with a down-firing 10-inch TW1 thin-line subwoofer in a sealed enclosure design. The Hard Data: Contains one 10TW1-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside forward-most portion of front center console, without affecting storage space or cup holders. Replaces the OEM “subwoofer” system, if vehicle is so equipped. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-4GSUVCNSL/10TW1 Installation Manual
$1,149.99
-
![JL Audio SB-GM-3GSLVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure, shown installed.]()
JL Audio SB-GM-3GSLVCNSL/10TW1 : 10" Thin 300W Subwoofer Enclosure @ 2Ω, 2014-2018 Silverado, Sierra (Front Bucket Seats)
Single 10-Inch 2-Ohm Thin 300-Watt Subwoofer-Enclosure for Select 2014-2018 Chevrolet-Silverado and GMC-Sierra Pickups, with Front Bucket-Seats and Factory-Console GM’s third generation Silverado/Sierra gets a full redesign with a variety of enhancements including engine and technology upgrades. Regrettably, the factory audio systems still come up short when it comes to bass reproduction. Designed to invisibly install in the factory console, this Stealthbox® adds impressive, high-quality bass, with zero loss of passenger space, storage space, or utility. The only thing you lose is that weak factory bass performance. Featuring 100% fiberglass construction, this Stealthbox® is equipped with a down-firing 10-inch TW1 thin-line subwoofer in a sealed enclosure design. The Hard Data: Contains one 10TW1-2 in a sealed enclosure. 300 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside forward-most portion of front center console, without affecting storage space or cup holders. Replaces the OEM “subwoofer” system, if vehicle is so equipped. Will not fit trucks equipped with eAssist powertrain. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-GM-3GSLVCNSL/10TW1 Installation Manual
$1,099.99
-
![JL Audio SB-F-SUPRCNSL/10W3v3 : 10" 500W Subwoofer Enclosure, shown installed.]()
JL Audio SB-F-SUPRCNSL/10W3v3 : 10" 500W Subwoofer Enclosure @ 2Ω, 1998-2007 Ford SuperDuty, Excursion (Front Bucket-Seats)
Single 500-Watt 2-Ohm 10-Inch Subwoofer-Enclosure for Select 1998-2007 Ford-Excursion and F-Series SuperDuty Trucks with Front Bucket-Seats If you drive Ford's biggest SUV or if your SuperDuty truck is equipped with bucket seats and a center console, this Stealthbox® model is right up your alley. Without infringing on people space and without being visible, it will fill your interior with rich, deep bass. This compact unit installs inside the factory center console. The cup holders remain unaffected and some console storage is retained. A powerful JL Audio 10-inch subwoofer driver fires down into the floor for intense up-front bass presence. The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Stealthbox® installs inside factory center console and fires down on the floor. Cupholders are not affected. For installation into front console only. Console storage is reduced. The factory console is not supplied with the Stealthbox®. After installation, the factory console is raised approximately 1.5 inches above the floor. Will not fit in SuperDuty trucks with bench seats. Will not fit consoles with rear cup holders and rear audio controls. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-F-SUPRCNSL/10W3v3 Installation Manual
$1,099.99
-
![JL Audio SB-D-QDRAMD/10TW1 : 10" Thin 600W Subwoofer Enclosure, shown installed.]()
JL Audio SB-D-QDRAMD/10TW1 : 10" Thin 600W Subwoofer Enclosure @ 2Ω, 2002-2022 Ram (Quad Cab)
Dual 10-Inch 600-Watt 2-Ohm Carpeted Fiberglass Subwoofer-Enclosure for Select 2002-2018 Dodge Ram 1500 Quad Cab, 2003-Up 2500 & 3500 Quad Cab & 2009-2018 1500 Crew Cab & 2009-Up 2500 & 3500 Crew Cab Trucks Dodge’s big hauler combines large sedan passenger comfort with tough pickup truck capabilities, but does not have a lot of extra interior space for a bulky subwoofer enclosure. JL's Stealthbox® for the Quad Cab® neatly negotiates these challenges and tucks under the rear seat, enclosing dual 10-inch thin line subwoofer drivers for impressive sub-bass performance. Seat folding and comfort are unaffected, and plenty of room is left in the center for amplifier installation or storage. Best of all, this Stealthbox® is essentially invisible once installed, but certainly noticeable when you fire up your favorite music and experience world-class sub-bass. The Hard Data:Contains two 10TW1-4 subwoofer drivers in a sealed enclosure. 600 watt power handling. Wired for 2 ohm mono. Some models may require cutting and removal of the underseat carpet and/or carpet padding. Will not fit Standard Cab, '02-'08 Crew Cab, or Mega Cab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-QDRAMD/10TW1 Installation Manual
$1,599.99
-
![Kicker 48CWRT8 : 300W 8" Thin Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil, right side.]()
Kicker 48CWRT8 : 300W 8" Thin Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
8-Inch 300-Watt Thin Subwoofer Driver, 2-Ohm or 4-Ohm DVC The CompRT 8-inch subwoofer is an all-weather thin bass driver with a pair of 2-Ohm or 4-Ohm voice coils. With a mounting depth under three inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. To make Kicker subs even more reliable, their engineers developed Forced-Air Cooling™ to help these thin subs run 20 percent cooler than before. Kicker signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. Revolutionary SoloKon™ technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion. The CompRT 8-Inch 48CWRT82 and 48CWRT84 subwoofers work best with a sealed or ported enclosure and 300 watts of recommended power. Specifications SIZE [in, cm]: 8, 20 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY [dB 1w/1m]: 81.8 MOUNTING DEPTH [in, cm]: 2 11/16, 6.7 MOUNTING DIAMETER [in, cm]: 7, 17.7 MIN SEALED BOX VOL [cu. ft, L]: 0.2, 5.66 MAX SEALED BOX VOL [cu. ft, L]: 1.0, 28.32 MIN VENTED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX VENTED BOX VOL [cu. ft, L]: 1.2, 34 Kicker CompRT Subwoofer Manual
$169.99
-
![Kicker 48CWR8 : 300W 8" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil, left side.]()
Kicker 48CWR8 : 300W 8" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
8-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 48CWR8 8" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler.The Kicker 48CWR82 and 48CWR84 8" subs work best with a sealed or ported enclosure and 300 watts of recommended power. Specifications SIZE [in, cm]: 8, 20 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 300 Peak Power (watts, per ANSI/CTA-2031-A) 600 SENSITIVITY [dB 1w/1m]: 82.1 MOUNTING DEPTH [in, cm]: 4-1/8, 10.5 MOUNTING DIAMETER [in, cm]: 7, 17.7 MIN SEALED BOX VOL [cu. ft, L]: 0.4, 11.3 MAX SEALED BOX VOL [cu. ft, L]: 1.0, 28.52 MIN VENTED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX VENTED BOX VOL [cu. ft, L]: 1.2, 34 Kicker CompR Subwoofer Manual
$99.99
-
![Kicker 48CWR15 : 800W 15" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil, left front.]()
Kicker 48CWR15 : 800W 15" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
15-Inch 800-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 48CWR15 15" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler. The Kicker 48CWR152 and 48CWR154 15" subs work best with a sealed or ported enclosure and 800 watts of recommended power. Specifications SIZE [in, cm]: 15, 38 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 800 Peak Power (watts, per ANSI/CTA-2031-A) 1600 SENSITIVITY [dB 1w/1m]: 89.4 MOUNTING DEPTH [in, cm]: 7 15/16, 20 MOUNTING DIAMETER [in, cm]: 13 3/4, 35 MIN SEALED BOX VOL [cu. ft, L]: 1.8, 51 MAX SEALED BOX VOL [cu. ft, L]: 3.0, 85 MIN VENTED BOX VOL [cu. ft, L]: 3.0, 85 MAX VENTED BOX VOL [cu. ft, L]: 5.0, 142 Kicker CompR Subwoofer Manual
$299.99
-
![Kicker 48CWR12 : 500W 12" Subwoofer Driver, 2Ω or 4Ω DVC, right side.]()
Kicker 48CWR12 : 500W 12" Subwoofer Driver, 2Ω or 4Ω DVC
12-Inch 500-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 48CWR12 12" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler.The Kicker 48CWR122 and 48CWR124 12" subs work best with a sealed or ported enclosure and 500 watts of recommended power. Specifications SIZE [in, cm]: 12, 30 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 500 Peak Power (watts, per ANSI/CTA-2031-A) 1000 SENSITIVITY [dB 1w/1m]: 86.9 MOUNTING DEPTH [in, cm]: 5 3/4, 14.6 MOUNTING DIAMETER [in, cm]: 11, 27.9 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64 MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 Kicker CompR Subwoofer Manual
$169.99
-
![Kicker 48CWR10 : 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil, left side.]()
Kicker 48CWR10 : 400W 10" Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
10-Inch 400-Watt Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 48CWR10 10" subwoofer is available in a 2Ω or 4Ω dual voice coil design, making it easy to get the most out of your amp. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. KICKER developed Forced Air Cooling to helps their subs run 25% cooler.The Kicker 48CWR102 and 48CWR104 12" subs work best with a sealed or ported enclosure and 400 watts of recommended power. Specifications SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 or 4 DVC Recommended Amplifier Power (watts RMS) 400 Peak Power (watts, per ANSI/CTA-2031-A) 800 SENSITIVITY [dB 1w/1m]: 84.6 MOUNTING DEPTH [in, cm]: 5-1/4, 13.3 MOUNTING DIAMETER [in, cm]: 9-1/8, 23.1 MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7 MAX SEALED BOX VOL [cu. ft, L]: 1.25, 35.4 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6 Kicker CompR Subwoofer Manual
$149.99
-
![JL SB-D-QDRAM/10W3v3 : Single 10" 500W Sub Box for Ram 1500 Crew Cab 2009-2018, installed.]()
JL Audio SB-D-QDRAM/10W3v3 : 10" 500W Subwoofer Enclosure @ 2Ω, 2002-UP Ram (Quad Cab)
Single 10-Inch 500-Watt 2-Ohm Carpeted Fiberglass Subwoofer-Enclosure for Select 2002-2018 Dodge Ram 1500 Quad Cab, 2003-Up 2500 & 3500 Quad Cab & 2009-2018 1500 Crew Cab & 2009-Up 2500 & 3500 Crew Cab Trucks Dodge's big hauler combines large sedan passenger comfort with tough pickup truck capabilities. JL's Stealthbox® for the Quad Cab tucks under the rear seat on the passenger side and encloses a 10-inch driver for impressive sub-bass performance. Seat folding is unaffected and plenty of room is left on the driver side for amplifier installation or storage. Best of all, the Stealthbox® is essentially invisible once installed. The Hard Data: Contains one 10W3v3-2 in a sealed enclosure. 500 watt power handling. Wired for 2 ohm mono. Installs under passenger side rear-bench seat. The seat folding function remains unaffected. Cup holders are not affected. Some models require removal of the passenger side metal floor extension located under the rear seat. Some models may require cutting and removal of the underseat carpet and/or carpet padding. Will not fit Mega Cab. Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order. JL Audio SB-D-QDRAM/10W3v3 Installation Manual
$1,099.99
-
![A-Trend A604-12CP : Dual 12" Sealed Sub Box for Toyota Tundra CrewMax 2007-2013, specs.]()
A-Trend A604-12CP : Dual 12" Sealed Sub Box, 2007-2013 Toyota Tundra (CrewMax)
Dual 12-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2013 Toyota-Tundra CrewMax-Cab Pickups Designed specifically for 2007-2013 Toyota Tundra Crew Max Trucks Premium carpeted finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 5.25" Box volume: 1.0 cubic feet (per chamber) Behind rear seat installation Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:45.75" Height:16.37" Depth:7.00" Max Mounting Depth:5.00" Gross VolumePer Sub:2.60 Net Volume Per Sub:1.80
$259.99
-
![A-Trend A602-12CP : Dual 12" Sealed Sub Box for Toyota Tundra Double Cab 2007-2018, specs.]()
A-Trend A602-12CP : Dual 12" Sealed Sub Box, 2007-2018 Toyota Tundra (Double Cab)
Dual 12-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2018 Toyota-Tundra Double-Cab Trucks Accu-Tuned 12” Dual sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2007-2018 Double cab trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. .83 Cubic Feet Net Volume internal air space (per sub) is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 4.375” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 4.375”, Width: 50.25” Height: 7.875”, Depth: 22.375” Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:50.25" Height:5.13" Depth:22.38" Max Mounting Depth:4.50" Gross VolumePer Sub:4.23 Net Volume Per Sub:3.07
$264.99
-
![A-Trend A604-10CP : Dual 10" Sealed Sub Box for Toyota Tundra CrewMax 2007-2013, specs.]()
A-Trend A604-10CP : Dual 10" Sealed Sub Box, 2007-2013 Toyota Tundra (CrewMax)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2013 Toyota-Tundra CrewMax-Cab Pickups Designed specifically for 2007-2013 Toyota Tundra Crew Max Trucks Premium carpeted finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 5.25" Box volume: 1.0 cubic feet (per chamber) Behind rear seat installation Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:45.75" Height:16.37" Depth:7.00" Max Mounting Depth:5.00" Gross VolumePer Sub:2.60 Net Volume Per Sub:1.80
$259.99
-
![A-Trend A602-10CP : Dual 10" Sealed Sub Box for Toyota Tundra Double Cab 2007-2018, specs.]()
A-Trend A602-10CP : Dual 10" Sealed Sub Box, 2007-2018 Toyota Tundra (Double Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2007-2018 Toyota-Tundra Double-Cab Trucks Accu-Tuned 10” Dual sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2007-2018 Double cab trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. .83 Cubic Feet Net Volume internal air space (per sub) is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 4.375” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 4.375”, Width: 50.25” Height: 7.875”, Depth: 22.375” Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:50.25" Height:5.13" Depth:22.38" Max Mounting Depth:4.50" Gross VolumePer Sub:4.23 Net Volume Per Sub:3.07
$264.99
-
A-Trend A382-10CP : Dual 10" Sealed Sub Box, 2002-2016 Ford F-Series (Superduty Extended Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2002-2016 Ford F-250, F-350 and F-450 Extended-Cab Trucks Dual 10" Subwoofer Enclosure Designed specifically for 2002-2016 Ford F250 F350 F450 Extended Cab Trucks Come with spacers to allow for subwoofer clearance Premium Carpted Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 5.125" Box volume: 0.65 cubic feet (per chamber) Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:48.75" Height:5.38" Depth:10.50" Max Mounting Depth:5.50" Gross VolumePer Sub:1.59 Net Volume Per Sub:1.02
$239.99
-
A-Trend A622-10CP : Dual 10" Sealed Sub Box, 2005-2015 Toyota Tacoma (Double Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2005-2015 Toyota-Tacoma Double-Cab Pickups Designed Specifically For 2005-2015 Toyota Tacoma Double Cab Premium carpeted finish Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:48.50" Height:18.25" Depth:7.50" Max Mounting Depth:5.50" Gross VolumePer Sub:2.92 Net Volume Per Sub:2.01
$259.99
-
![A-Trend A608-10CPV : Dual 10" Ported Sub Box for Toyota Tundra Crew Max 2014-2019, side view.]()
A-Trend A608-10CPV : Dual 10" Ported Sub Box, 2014-2019 Toyota Tundra (CrewMax)
Dual 10-Inch Vented Carpeted Subwoofer-Enclosure for Select 2014-2019 Toyota-Tundra CrewMax-Cab Pickups Dual 10" Ported for Toyota Tundra Crew Max 2014-2019 Behind Seat Application Premium Carpet Finish Mounting Depth: 3.75" Air Space: .88 Cubic Feet (per sub) Tuning Frequency: 36HZ Specifications Configuration: Dual Vented Finish: Charcoal Carpeted Width:47.24" Height:8.86" Depth:16.54" Max Mounting Depth:3.75" Gross VolumePer Sub:1.28 Net Volume Per Sub:0.88
$279.99
-
![A-Trend A402-10CP : Dual 10" Sealed Sub Box for Nissan Titan, King and Crew Cab 2003-2015, specs.]()
A-Trend A402-10CP : Dual 10" Sealed Sub Box, 2003-2015 Titan (King and Crew Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2003-2015 Nissan-Titan King or Crew-Cab Trucks Accu-Tuned 10” Dual sealed subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2003 – 2015 Nissan Titan or Crew Cab trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. .85 Cubic Feet Net Volume internal air space (per sub) is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 5.125” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 5.125”, Width: 49.25” Height: 7.625”, Depth: 13” Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:49.25" Height:6.88" Depth:13.00" Max Mounting Depth:5.00" Gross VolumePer Sub:2.80 Net Volume Per Sub:2.00
$239.99
-
A-Trend A393-10CP : Dual 10" Sealed Sub Box, 2008-2016 Ford F-Series (SuperDuty Crew Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2008-2016 Ford F-250, F-350, and F-450 Crew-Cab Trucks Designed specifically for 2008-2016 Ford F250/F350/F450 Crew Cab Trucks Premium Carpeted Finish 3/4" Mounting Baffle Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 4.75" Box volume: 0.65 cubic feet (per chamber) Installation Note: Fits models with and without electric rear window. Fits behind the rear seat. Removal of jack kit is required. Removal of rear seat belt cover and rear carpet is required. The power window motor will need to be removed during installation. Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:55.25" Height:16.13" Depth:6.13" Max Mounting Depth:5.50" Gross VolumePer Sub:2.46 Net Volume Per Sub:1.55
$239.99
-
![A-Trend A181-12V : Single 12" Vented Sub Box, 2007-2020 Silverado Sierra Crew Cab, specs.]()
A-Trend A181-12V : Single 12" Vented Sub Box, 2007-2020 Silverado Sierra (Crew Cab)
Single 12-Inch Vented Tuff-Coat Lined Sub-Box for Select 2007-2020 Chevrolet-Silverado and GMC-Sierra Crew-Cab Trucks Accu-Tuned 12” Single vented subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2007-2020 Chevrolet / GMC trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 1.7 Cubic Feet Gross and 0.83 Net Volume internal net air space are ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 9” which is ideal for full size and lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium Rugged Spray Liner for durability and enhanced airtight seal. Dimensions Sub Cut Out: 9.125”, Mounting Depth: 6.5”, Width: 28.87”, Height: 6.75”, Depth: 17.75” Specifications Configuration: Single Vented Finish: Tuff Coat Finish Width: 28.88" Height: 4.50" Depth: 17.75" Max Mounting Depth: 6.50" Gross VolumePer Sub: 1.50 Net Volume Per Sub: .95
$244.99
-
![A-Trend A214-10CP : Dual 10" Sealed Sub Box for RAM Mega Cab 2006-2013, specs.]()
A-Trend A214-10CP : Dual 10" Sealed Sub Box, 2006-2013 RAM (Mega Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2006-2013 Ram Mega-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 10” Dual sealed subwoofer enclosure with designated amp room designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 2006 - 2013 Dodge Ram Mega Cab to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 0.6 Cubic Feet Net Volume internal air space per sub is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 9” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub cut out: 9.125”, Mounting Depth: 9”, Net Air Volume: 0.6 cu. ft. Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:43.25" Height:3.13" Depth:13.50" Max Mounting Depth:3.00" Gross VolumePer Sub:0.63 Net Volume Per Sub:0.63
$249.99
-
![A-Trend A208-10CPA : Dual 10" Sealed Sub Box, 1994-2001 RAM Regular Cab, specs.]()
A-Trend A208-10CPA : Dual 10" Sealed Sub Box, 1994-2001 RAM (Standard Cab)
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 1994-2001 Ram Regular-Cab Pickups CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Accu-Tuned 10” Dual sealed subwoofer enclosure with designated amp room designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. OEM-Fit is designed and engineered specifically for the 1994–2001 Dodge ram Regular Cab to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction. 0.90 Cubic Feet Net Volume internal air space per sub is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 6.5” which is ideal for lower profile subwoofers. Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber. Premium OEM Grade Carpeting for factory look and durability. Dimensions Sub cut out: 9.125”, Mounting Depth: 6.5”, Net Air Volume: 0.90 cu. ft. Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted
$249.99
-
A-Trend A192-10CP : Single 10" Sealed Sub Box, 2001-2013 Avalanche Escalade
Dual 10-Inch Sealed Carpeted Subwoofer-Enclosure for Select 2001-2013 Cadillac-Escalade and Chevrolet-Avalanche Vehicles CLICK HERE TO VIEW SUBWOOFERS THAT FIT THIS BOX! Dual 10" Subwoofer Enclosure Designed specifically for 2001-2013 Chevy Avalanche and Cadillac Escalade Premium carpeted finish Hardwood MDF construction Rounded edges Glued and Braced construction Subwoofer mounting depth: 5.5" Box volume: 0.8 cubic feet (per chamber) Specifications Configuration: Dual Sealed Finish: Charcoal Carpeted Width:51.00" Height:6.00" Depth:14.63" Max Mounting Depth:6.00" Gross VolumePer Sub:1.25 Net Volume Per Sub:0.89
$239.99
You have seen 96 out of 260 products