Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1992-2007 Dodge and Mitsubishi Vehicles
Comes with 70-7001
Has only power wires and no speaker wires
DIN plug with RCA plugs
Amplified Applications
DODGE
Stealth
1994-1996
MITSUBISHI
3000GT
1994-1999
Diamante
1992-2004
Eclipse
1995-2005
Galant
1994-2003
Lancer
2002-2007
Mirage
1997-2002
Montero
1997-2005
Montero Sport
1997-2004
Outlander
2003-2006
Four-Inch Coaxial Midrange-Tweeter Drivers, 75-Watt RMS
The Kicker KS series four-inch coaxial speakers come with a custom bracket option built specifically to fit in today’s GM, Chrysler, Subaru, Toyota and Jeep factory speaker locations.
KS series speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 75 watts of recommended power.
High power handling
Tough rubber surrounds
Thin-mount design easily fits behind factory grilles
Brackets for select GM/Chrysler/Subaru/Jeep and Toyota included
Specifications
Speaker Design
2-Way
Woofer [in, mm]
4, 100
Tweeter [in, mm]
½, 13
Rated Impedance [Ω]
4
Recommended Amplifier Power [Watts RMS]
15-75
Sensitivity [1W, 1m]
88
Frequency Response [Hz]
60-20k
Mounting Hole Diameter [in, mm]
3-11⁄16, 94
Top Mount Depth [in, mm]
1-13⁄16, 46
Bottom Mount Depth [in,mm]
2-1⁄16, 51
Tweeter Protrusion [in,mm]
1/8, 3
Grilles
Yes
Tweeter Magnet Material
Neodymium
Tweeter Dome Material
Silk
Woofer Cone Material
Polypropylene
Woofer Surround Material
Rubber
Kicker KS Series Coaxial Speaker Manual
12-Inch 300-Watt Subwoofer Driver, 4-Ohm SVC or 4-Ohm DVC
This CompC 12" sub driver from Kicker has a thick stamped steel basket that holds an injection-molded polypropylene cone with stabilizing ribs in the surround.
The 44CWCS124 and 44CWCD124 12-Inch subs are available in a 4Ω Single Voice or 4Ω Dual Voice coil design with spring loaded speaker terminals. These CompC drivers are rated for 300W RMS of amplified power.
Specifications
Size (IN.,CM)
12, 30
Impedance (OHMS)
4 SVC or 4 DVC
Recommended Amplifier Power (watts RMS)
300
Peak Power (watts, per ANSI/CTA-2031-A)
600
Sensitivity (dB 1w/1m)
88.3
Frequency Response (Hz)
27-500
Mounting Depth (in, cm)
5-3/8, 13.6
Mounting Cutout (in, cm)
11, 27.9
Min Sealed Box Vol (cu. ft, L)
1.25, 35.4
Max Sealed Box Vol (cu. ft, L)
3.5, 99.1
Min Vented Box Vol (cu. ft, L)
1.75, 49.6
Max Vented Box Vol (cu. ft, L)
2.25, 63.7
Kicker CompC Subwoofer Manual
10-Inch 300-Watt 2-Ohm or 4-Ohm Thin Subwoofer-Enclosure for Select 2018-2023 Jeep Wrangler-Unlimited, Passenger-Side
Combining JL's advanced thin-line subwoofer technology with a form fitting enclosure design, these Stealthbox® systems deliver outstanding sub-bass performance in your 4-door Wrangler, without consuming excess cargo space.
Constructed from 100% fiberglass, each Stealthbox® houses a 10TW1 thin-line subwoofer and mounts solidly above each rear wheel well. A matching trim panel and sturdy steel-mesh grille are included, so you can carry plenty of gear without worrying about damage. Separate driver and passenger side Stealthbox® models are available, each with 2 or 4 ohm drivers.
The Hard Data: Contains one 10TW1 in a sealed enclosure with 300 watt power handling. Choose from 2 ohm or 4 ohm models, driver or passenger side. Each enclosure installs above one rear wheel well. Black steel mesh grille is included with each.
If vehicle is factory-equipped with Premium Audio, passenger side Stealthbox® installation requires removal of OEM “subwoofer” and purchase of interior trim parts from Jeep®.
Will not fit any "JK" Jeep® model or 2-Door "JL" models.
Soft-top models: Stealthbox® installation does not interfere with normal top operation, except for the final position where the top mechanism is detached from the rails.
Jeep Part #CFWLR-74-24 carpet needs to be ordered from jeep to remove the Factor Subwoofer.
Stealthbox® products are built to order and generally ship within 5-6 business days of receiving your order.
JL Audio SB-J-JL4DPAS/10TW1-2 Installation Manual
JD-Series Monoblock Amplifier, 1000-Watt @ 2-Ohm or 600-Watt @ 4-Ohm
Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. JL Audio's proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.
The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.
General Specifications
@ 4 Ω
600 W RMS x 1
@ 3 Ω
800 W RMS x 1
@ 2 Ω
1000 W RMS x 1
Frequency Response
7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power
>80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W
>50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>1000 / 50 Hz
Damping Factor @ 2 Ω
>500 / 50 Hz
THD+N @ Rated Power
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
80 A (AFS, AGU or MaxiFuse™)
Filter Mode(s)
Low-Pass only
Filter Slope(s)
12 dB/octave
Filter Frequency Range
50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer
No
Filter Defeat Function
No
Infrasonic Filter
No
Bass Boost EQ
Yes
Output Polarity Switch
No
Remote Subwoofer Level Control
Optional (RBC-1)
Remote Bass EQ Boost Control
No
Pass-Through Preamp Output
Buffered
JL Audio JD1000/1 Manual
Double-DIN-Size Stereo Replacement Dash Kit for Select 2003-2011 Mercedes CLS and E-Class
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant matte black
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
MERCEDES
C-Class
2008-2011
CLS-Class
2009-2011
CLS-Class
2006-2008
E-Class
2009-2009
E-Class
2003-2008
S-Class
2004-2006
S-Class
2003-2003
S-Class
2000-2002
SL-Class
2005-2008
SL-Class
2003-2004
Metra 95-8732B Installation Manual
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2003-2011 Mercedes CLS, E and SLK Class Vehicles
Provides accessory power
Designed for amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains balance
Micro B USB updatable
Amplified Applications
MERCEDES
CLS-Class
2006-2011
E-Class
2003-2008
Axxess Interface AXDIS-MB132 Installation ManualAxxess Interface AXDIS-MB132 Can Hub Tech Tip
50' Sirius XM Antenna Extension Cable
This helps you extend the length of your antenna cable so you get a great signal anywhere you need it. Weather-resistant, it features an inline signal amplifier and is combinable to 125 feet.
M6-Series High-Definition Front and Rear Facing Dash-Camera Recording-System with WiFi-Connectivity
Wi-Fi enabled Full HD (1080p) dash camera system including front camera, rear camera, GPS antenna, and 32GB micro-SD memory card.
Protection On and Off the RoadThe Momento M6 is a smart dash cam that provides 270° of surveillance coverage – and records footage that you can view from the Momento smartphone app!
What is a "Smart" Dash Cam?The M6 is Momento’s first dash cam that connects to your smartphone by creating a small and secure Wi-Fi hotspot inside your vehicle that only you can access through the Momento App.
In addition to giving you easy access to your video files, the Momento App also provides additional driving insights such as speed, location and trip data.
An Extra Set of Eyes On the RoadYou’re a safe, responsible driver, but accidents happen: Luckily, Momento’s got you covered:
Driving Mode - Continuously records everything at the front and rear of your vehicle while driving.
Impact Sensors - Stores 15 seconds before and after any impact or shock your vehicle experiences.
Parking Mode - Even when you're parked, the M6 has motion sensors that trigger recordings.
Exceptional Low-light SensitivityThe M6 records in Full HD, giving you crystal clear footage in 1080p. Additionally, the M6 is equipped with a Sony Exmor-R image sensor that is enhanced with STARVIS, the industry-standard for surveillance applications, ensuring low-light performance.
Massive Upgradeable StorageThe M6 includes a 32GB micro-SD card that can be upgraded to any Class 10 micro-SD card up to 256GB. That’s twice as much as our leading competitors! Plus, its easy-to-use file management system best utilizes your storage while ensuring your most important videos stay saved.
IMPORTANT NOTE:High-capacity SD cards require specific formatting in order to work with the Momento M6.
2-Year WarrantyThe M6 is protected by a 2-Year manufacturer’s Warranty. This warranty covers both front and rear cameras, and protects your purchase from defects or malfunctioning parts*.
*Does not cover labor nor installation.
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2005-2019 Volkswagen Vehicles
This stereo installation kit has been engineered to help you install either a 2" tall (Single-DIN) or a 4" tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2" radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4" tall radio. The dash kit is designed to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2" or 4" tall aftermarket radio utilizing our patented snap-in ISO support system
Provides a recessed Single-DIN opening with pocket
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
VOLSKWAGEN
Beetle
2012-2019
CC
2009-2017
Eos
2007-2016
Golf
2010-2014
Golf R
2012-2013
GTI
2006-2014
Jetta
2005-2018
Jetta GLI
2005-2018
Jetta SportWagen
2010-2014
Passat
2012-2019
Passat
2006-2010
R32
2008
Rabbit
2006-2009
Tiguan
2009-2017
Metra 99-9011 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 1998-2010 Volkswagen-Beetle Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is contoured and textured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Professional Installer Series TurboKit designed to fit any standard 2” tall aftermarket radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
VOLKSWAGEN
Beetle
1998-2010
Metra 99-9008 Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2005-2017 Nissan and Suzuki Vehicles
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is located below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio utilizing our patented quick-release, snap-in ISOmount system with custom trim ring
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets with detailed installation instructions
Applications
NISSAN
Frontier
radio delete option
2016-2017
Frontier
S trim with King Cab (w/ or w/o radio delete option)
2013-2015
Frontier
S trim
2012-2012
Frontier
S, SE-4 cyl., XE
2009-2011
Frontier
all except Base model
2008-2008
Frontier
Base model
2008-2008
Frontier
2005-2007
Pathfinder
S
2008-2012
Pathfinder
2005-2007
Xterra
w/o 4.3-inch screen
2013-2013
Xterra
X trim, 4WD
2009-2012
Xterra
late production (w/ factory amp)
2008.5-2008.5
Xterra
late production (w/o factory amp)
2008.5-2008.5
Xterra
early production
2008-2008
Xterra
2005-2007
ISUZU
Equator
extended cab
2009-2011
Metra 99-7581 Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2013-2017 RAM Vehicles
ISO DIN radio provision with pocket
ISO DDIN radio provision
Integrated 4.3 inch color touchscreen that displays the factory climate and personalization features
Retains audio controls on the steering wheel
Painted black to match the factory finish.
Notes:
The clock and compass in the drivers information center will no longer be functional.
The kit does not have the ability to adjust the Active-Level™ Four Corner Air-Suspension.
The kit does not retain the 5th wheel camera.
The kit does not retain the trailer brake adjustments.
The kit does not retain the key fob controller settings.
Interface features
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains safety chimes
Retains the factory backup camera
Retains the factory AUX-IN jack
Can be used in amplified or non-amplified models
Retains balance and fade*
Micro-B USB updatable
Applications
RAM
1500/2500/3500
with 8.4-inch touchscreen
2013-2017
Chassis Cab 2500, 3500, 4500, 5500
with 8.4-inch touchscreen
2013-2017
Metra 99-6527B Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2004-2009 Chrysler, Dodge and Jeep Vehicles, with factory navigation
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement easier and comes with a pocket that is installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio with an ISO-mount provision
Designed for vehicles that are equipped with factory navigation radios
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
CHRYSLER
Aspen
2007
300, 300C
2005-2007
DODGE
Caliber
2007-2008
Durango
2004-2007
Ram Pickup 1500
2006-2008
Ram Pickup 2500, 3500
2006-2009
Ram Pickup Chassis Cab 4500, 5500
2008-2010
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2005-2007
Patriot
2007-2008
Metra 99-6510 Installation Manual
DIN-Size Head-Unit Replacement Dash Kit for Select 1998-2010 Chrysler, Dodge, Jeep and Plymouth Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a mini built-in pocket that is located below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented Snap-In ISO Support System
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets with detailed installation instructions
Applications
CHRYSLER
300M
1999-2004
Concorde
1998-2004
LHS
1999-2001
PT Cruiser
2001-2005
Sebring
2001-2006
Town & Country
2001-2007
Voyager
2001-2003
DODGE
Caravan
2001-2007
Dakota
2001-2004
Durango
2001-2003
Grand Caravan
2001-2007
Intrepid
1998-2004
Neon
2000-2005
Ram Pickup 1500
2002-2005
Ram Pickup 2500, 3500
2002-2005
Stratus
2001-2006
Viper
2003-2010
JEEP
Grand Cherokee
1999-2004
Liberty
2002-2007
Wrangler
2003-2006
Metra 99-6505 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 2006-UP Buick, Cheverolet, GMC, Hummer, Pontiac Saturn and Suzuki Vehicles
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a built-in pocket that is located below the 2" radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2" tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Painted scratch-resistant matte black
Provides a recessed Single-DIN opening
Storage pocket includes built-in radio supports below the radio opening
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
BUICK
Enclave
2008-2012
Lucerne
2006-2011
CHEVEROLET
Avalanche
2007-2013
Captiva Sport
2012-2015
Equinox
2007-2009
Express
2008-2021
Impala
2006-2013
Impala Limited
2014-2016
Monte Carlo
2006-2007
Silverado 2500 HD, 3500 HD, Chassis Cab
2014
Silverado
2007-2013
Suburban
2007-2014
Tahoe
2007-2014
Traverse
2009-2012
GMC
Acadia
2007-2012
Savana
2008-2020
Sierra 2500 HD, 3500 HD, Chassis Cab
2014
Sierra
2007-2013
Yukon, Yukon XL
2007-2014
Yukon Denali, Yukon XL Denali
2007-2014
HUMMER
H2
2008-2009
PONTIAC
Torrent
2007-2009
SATURN
Outlook
2007-2010
VUE
2008-2010
SUZUKI
XL-7
2007-2009
Metra 99-3305 Installation Manual
Double-DIN Size Stereo-Replacement Dash-Kit for Select 1997-2001 Jeep-Cherokee Vehicles
This replacement dash panel is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash panel helps make radio replacement easier and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Modifications to the sub-dash are required for this installation and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash panel to make it fit.
Stereo installation dash panel designed to replace the factory center panel and fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant matte black
Sub-dash modifications are necessary
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
JEEP
Cherokee
1997-2001
Metra 95-6554B Installation Manual
Double-DIN-Size Stereo Replacement Dash Kit for Select 2002-2005 Ram Trucks
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Modifications to the factory radio bezel are required for this installation and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Painted scratch-resistant matte black
Factory radio bezel modifications are necessary
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
DODGE
Ram Pickup 1500
2005-2005
Ram Pickup 1500
SRT trim w/ handsfree
2004-2004
Ram Pickup 1500
2004-2004
Ram Pickup 1500
SRT trim w/o handsfree
2004-2004
Ram Pickup 1500
2002-2003
Ram Pickup 2500, 3500
2005-2005
Ram Pickup 2500, 3500
2004-2004
Ram Pickup 2500, 3500
2003-2003
Metra 95-6522B Installation Manual
DDIN-Size Head-Unit Replacement Dash Kit for Select 2009-2014 Ford F-150 Vehicles without Factory Navigation
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio
Available in Matte Black, (Call for Price! - High Gloss Black, Drape Walnut, Cocobolo and Smoked Satin)
For vehicles without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
FORD
F-150
w/ CD, w/o color screen
2013-2014
95-5820B
F-150
FX, STX, XLT
2011-2012
95-5820B
F-150
SVT Raptor
2009-2012
95-5820B
F-150
FX, STX, XLT
2009-2010
95-5820B
F-150
XL w/ CD
2009-2014
95-5820B
F-150
King Ranch
2011-2012
95-5820CB
F-150
Lariat
2011-2012
95-5820DW
F-150
Platinum
2011-2012
95-5820HG
F-150
Harley Davidson
2011-2012
95-5820SS
Metra 95-5820 Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 1981-2004 Toyota Vehicles
This dash pocket has been designed to be used when replacing a factory 4” tall (Double-DIN) radio with a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. The pocket makes radio replacement simple by filling the extra space in the radio opening, which can be used for storage. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this pocket to make it fit when installing a Single-DIN radio.
Designed to fit below any Single-DIN aftermarket radio with an ISOmount when replacing a factory Double-DIN radio
Made from the highest quality ABS plastic for an original factory-like fit and finish
Uses factory brackets with detailed installation instructions
A tech support number is available for installation help 7 days a week
To complete your installation, you will need one or all of the following: Stereo, wire harness, CANBUS interface, and antenna cable connection adapter. All are sold separately. Look up your vehicle for more information.
Wiring and Antenna Connections
Wiring Harness: (sold separately)
Please use the vehicle fit guide for harness applications
Antenna Adapter:
Not Required
Applications
LEXUS
ES250
1990-1991
LX 450
1996-1997
TOYOTA
4Runner
1984-2002
Avalon
1995-1999
Camry
1987-2001
Camry Solara
1999-2003
Land Cruiser
1993-2002
Paseo
1992-1995
Sequoia
2001-2002
Solara
1999-2003
Supra
1994-1998
Tercel
1991-1994
Tercel
1983-1986
Tundra
2000-2002
Metra 88-00-8000 Installation Manual
DIN-Size Head-Unit Replacement Dash Kit for Select 2003-2009 Toyota 4-Runner-Limited Vehicles, without navigation
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a built-in pocket that is located below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Designed for Limited models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and detailed installation instructions
Applications
TOYOTA
4Runner
Limited
2003-2009
Metra 99-8210 Installation Manual
Six-Inch to 6-3/4-Inch Door Speaker Trim Ring Adapter for Select 2002-UP Lexus, Subaru and Toyota Vehicles
Accommodates 6 to 6.75 inch speaker – pair
Front Speaker Applications
LEXUS
CT 200h
2011-2013
GX Series
2010-2014
GX Series
2003-2009
LS 460
2010-2012
LS 460
2007-2009
LS 600h L
2013-2014
LS 600h L
2010-2012
LS 600h L
2008-2009
LS Series
2013-2014
SUBARU
Crosstrek
2018-2020
Impreza
2017-2020
Legacy
2015-2020
Outback
2018-2018
TOYOTA
(Camry) Solara
2004-2008
4Runner
2015-2020
4Runner
2010-2014
4Runner
2003-2009
Avalon
2013-2014
Avalon
2011-2012
Avalon
2005-2010
Camry
w/o JBL
2002-2011
FJ Cruiser
2007-2014
Highlander
2008-2012
Land Cruiser
2008-2014
Prius
2012-2015
Prius
2010-2011
Sequoia
2008-2014
Tacoma
2005-2015
Tundra
2014-2018
Tundra
crew cab
2007-2013
Venza
2009-2015
Universal 1/2-Inch Thick Replacement Speaker Trim Ring for 6-inch to 6.75-Inch Drivers
1/2 inch spacer designed for installation of 6 to 6-3/4 inch aftermarket speakers & works with all varieties of speakers including component drivers
One pair of adapters included in each package
Six-Inch to Six-3/4" Door-Speaker Replacement Adapter-Plates for Select 2015-UP Chevy and GMC Vehicles
Vehicle specific spacer designed for installation of 6 to 6.75 inch aftermarket speakers
Will work: front door speaker locations (Sierra/Silverado) rear deck (Malibu)
One pair of adapters included in each package
Front Speaker Applications
BUICK
Enclave
Bose
2018-2023
Enclave
2018-2023
Envision
2016-2020
CADILLAC
Escalade
Incl. ESV
2015-2020
XT5 Crossover
9 Speakers
2017-2024
XT5 Crossover
7 Speakers
2017-2024
XTS
9 Speakers
2013-2019
XTS
7 Speakers
2013-2019
CHEVROLET
Blazer
2019-2020
Silverado 1500
Crew Cab
2019-2024
Silverado 2500 HD, 3500 HD
Crew Cab
2020-2024
GMC
Acadia
2017-2023
Canyon
Extended Cab
2015-2024
Canyon
4 door
2015-2024
Sierra / Sierra Denali 1500
Crew/Extended Cab
2019-2024
Sierra / Sierra Denali 1500
Standard Cab
2019-2024
Sierra / Sierra Denali 2500 HD, 3500 HD, Chassis Cab
Crew Cab
2015-2024
Sierra / Sierra Denali 2500 HD, 3500 HD, Chassis Cab
Standard Cab
2015-2024
Sierra / Sierra Denali 2500 HD, 3500 HD, Chassis Cab
Extended Cab
2015-2024
Sierra / Sierra Denali 1500 Limited
Crew Cab
2019-2019
Sierra / Sierra Denali 1500 Limited
Extended Cab
2019-2019
Sierra / Sierra Denali 1500 Limited
Standard Cab
2019-2019
Sierra / Sierra Denali 1500
Crew Cab
2014-2018
Sierra / Sierra Denali 1500
Standard Cab
2014-2018
Sierra / Sierra Denali 1500
Extended Cab
2014-2018
Terrain
2018-2024
Yukon/Yukon XL/Yukon Denali
2021-2024
Yukon/Yukon XL/Yukon Denali
2015-2020
Rear Speaker Applications
CHEVEROLET
Malibu
2016-2020
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1995-2004 Ford, Lincoln, Mercury and Mazda Vehicles
For all amplified systems using a 35 Watt or greater radio
Amplifier Integration Harness
12 inch long
Amplified Applications
FORD
Crown Victoria
1995-1997
Escort
1997-2002
Escort ZX2
1997-2002
Expedition
1997-1998
Explorer
1995-1997
F-250
1998-2004
F-350/450/550
1999-2004
Ranger
1995-1997
LINCOLN
Continental
1995-1997
Mark VIII
1995-1998
Navigator
1997-1998
MAZDA
B-Series Pickup
1995-1997
MERCURY
Grand Marquis
1995-1997
Mountaineer
1997
Universal Add-On FM-Antenna Booster
Amplifier for FM band with bypass switch, in-dash or under dash mounting
21 inch (53cm) coaxial cable and power supply wire
Universal Amplified Glass Mount Add-On FM-Antenna
AM/FM slim style windshield or glass mount amplified antenna
Gain FM – 10db/12db, AM -5db/2db
11 inch (28cm) width
144 inch flat cable
96-Inch Universal Motorola-Style Head-Unit Replacement Antenna Extension-Cable
Easily extend your FM Antenna wire to reach a new mounting location or add-on to your existing connection to provide more length to install your new head-unit.
Stereo-Replacement Antenna Adapter for Select 1987-2006 Infiniti and Nissan Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector and a blue wire lead on one end and a male antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector and a blue wire lead on one end
Male antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead
Enter your vehicle model to see if this is compatible with your vehicle
Applications
INFINITI
FX35, FX45
2003-2008
G35
2003-2007
G20
1991-2002
I35
2002-2004
I30
1996-2001
J30
1993-1997
M45
2003-2004
M30
1990-1992
Q45
1990-2005
QX4
1997-2003
QX56
2004-2007
NISSAN
200SX
1995-1998
240SX
1989-1998
300ZX
1990-1996
Altima
1993-2001
Maxima
1987-2006
Murano
2003-2007
Pathfinder
1987-2012
Quest
1993-2006
Stereo-Replacement Antenna Female Adapter for Select 2006-UP Lexus, Scion, Subaru, and Toyota Vehicles
If you are replacing the factory antenna in your vehicle, this antenna cable adapter ensures that you can continue to use your original factory radio. It is a simple yet necessary cable that adapts the aftermarket antenna cable to plug into the vehicle’s factory radio with a female Motorola™ connector and a blue wire lead on one end and a male antenna connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s original factory radio to use with an aftermarket antenna
Female Motorola™ connector and a blue wire lead on one end
Male antenna connector on the other end
A blue wire is attached to the adapter that connects to the antenna turn-on lead
Enter your vehicle model to see if this is compatible with your vehicle
Applications
LEXUS
CT 200h
2011-2017
ES Series
2019-2020
ES 300h, ES 350
2013-2018
GS Series
2013-2020
GS 350, GS 450h, GS 460
2010-2011
GX 460
2010-2020
HS 250h
2010-2012
IS Series
2014-2020
IS 250C, IS 350C, IS F
2006-2015
IS 250, IS 350
2006-2013
LC Series
2018-2020
LFA
2012-2012
LS Series
2013-2020
LS 460
2010-2012
LS 600h L
2010-2016
LX 570
2010-2020
NX Series
2015-2020
RC Series
2013-2020
RX Series
2016-2020
RX 350, RX 450h
2010-2015
UX Series
2019-2020
SCION
FRS
2013-2016
iM
2016
tC
2014-2015
SUBARU
Ascent
2019-2022
BRZ
2013-2022
Crosstrek
2016-2023
Forester
2014-2018
Impreza
2012-2023
Impreza WRX
2013-2014
Legacy
2012-2019
Outback
2012-2019
WRX STI
2016-2021
WRX
2015-2021
XV Crosstrek
2013-2015
TOYOTA
4Runner
2014-2023
86
2017-2020
Avalon
2013-2020
C-HR
2018-2022
Camry
2012-2022
Corolla
2012-2023
Corolla Hatchback
2019-2023
Corolla iM
2017-2018
FJ Cruiser
2011-2014
Highlander
2013-2023
Land Cruiser
2010-2020
Matrix
2013-2014
Mirai
2016-2019
Prius
2012-2020
Prius Plug-In (PHV)
2012-2015
Prius C
2012-2019
Prius Prime
2017-2020
Prius V
2012-2017
RAV4
2019-2020
RAV4 (non-EV)
2013.5-2018
RAV4 (non-EV)
2013-2013.5
RAV4
2012
Sequoia
2013-2022
Sienna
2015-2020
Tacoma
2012-2023
Tundra
2014-2021
Venza
2013-2015
Yaris
2018
Yaris
2012-2017
Head-Unit Replacement Female Antenna-Adapter for Select 1988-2008 GM Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female a connector for a mini “barbed” or “barbless” plug from the factory antenna on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female connector for a mini “barbed” or “barbless” plug from the factory antenna on the other end
Enter your vehicle model to see if this is compatible with your vehicle
Applications
BUICK
Century
1988-2005
Electra
1988-1990
LaCrosse (aka Allure in Canada)
2005-2009
LeSabre
1988-1999
Park Avenue
1988-2005
Rainier
2004-2007
Reatta
1988-1991
Regal
1988-2004
Rendezvous
2002-2007
Riviera
1986-1999
Roadmaster
1991-1996
Skylark
1987-1998
Skyhawk
1988-1989
Terraza
2005-2007
CADILLAC
Brougham
1987-1992
Catera
1997-2001
Coupe DeVille
1988-1993
DeVille
1988-2005
Eldorado
1988-2002
Escalade ESV
2003-2006
Escalade EXT
2002-2006
Escalade
1999-2006
Fleetwood
1988-1996
Fleetwood Brougham
1990-1992
Seville
1988-2004
STS
2005-2011
CHEVY
Astro Van
1985-2005
Avalanche
2002-2006
Beretta
1988-1996
C/K Pickup
1995-2000
Camaro
1990-2002
Caprice
1991-1996
Cavalier
1988-2005
Celebrity
1990-1990
Classic (a.k.a. Malibu)
2004-2005
Cobalt
2005-2006
Colorado
2004-2012
Corsica
1988-1996
Corvette
1990-2013
Equinox
2005-2006
Express
1996-2007
G-Series Van
1988-1996
Impala
1994-2005
Kodiak C4500-8500
2003-2009
Lumina
1990-2001
Lumina APV
1990-1996
Malibu
1997-2007
Malibu Classic
2008
Classic (a.k.a. Malibu Classic)
2004-2005
Malibu Maxx
2004-2007
Monte Carlo
1995-2005
S-10 Blazer
1988-2005
S-10 Pickup
1989-2004
Silverado Classic
2007
Silverado
2003-2006
Silverado 1500, 2500
1999-2002
Silverado 3500
2001-2002
SSR
2003-2006
Suburban
1988-2006
Tahoe
1995-2006
Tracker
1998-2004
Trailblazer
2002-2009
Uplander
2005-2008
Venture
1997-2005
GMC
Canyon
2004-2012
Envoy
1998-2009
G-Series Van
1988-1996
Jimmy (a.k.a. Jimmy Envoy)
1998-2001
Jimmy
1988-1997
Safari
1985-2005
Savana
1996-2007
Sierra Classic
2007
Sierra
2003-2006
Sierra 1500
1999-2002
Sierra 2500
1999-2002
Sierra 2500 HD
2000-2002
Sierra 3500
2001-2002
C/K Pickup
1995-1998
Sonoma
1998-2004
S-15 Sonoma
1986-1997
Suburban
1988-1999
Topkick C4500-8500
2003-2009
Yukon XL
2000-2006
Yukon
1995-2006
Yukon XL Denali
2001-2006
Yukon Denali
1999-2006
HUMMER
H2
2003-2007
H3
2006-2010
HYUNDAI
Santa Fe
2003-2006
ISUZU
Ascender
2003-2008
Hombre
1998-2001
I-290, I-370
2007-2008
I-280, I-350
2006-2006
KIA
Sorento
2003-2006
OLDSMOBILE
Achieva
1992-1998
Alero
1999-2004
Aurora
1995-2000
Bravada
1991-2004
Cutlass
1997-1999
Cutlass Calais
1988-1991
Cutlass Ciera
1988-1996
Cutlass Supreme
1988-1997
Eighty-Eight
1988-1999
Intrigue
1998-2002
LSS
1996-1999
Ninety-Eight
1988-1996
Regency
1997-1998
Silhouette
1997-1999
Silhouette APV
1990-1996
Touring Sedan
1988-1990
Toronado
1983-1993
PONTIAC
6000
1986-1991
Aztec
2001-2005
Bonneville
1992-1999
Bonneville Safari Wagon
1987-1989
Firebird, Firebird Trans Am
1988-2002
G6
2005-2009
Grand Am
1988-2005
Grand Prix
1988-2008
Lemans
1988-1993
Montana
1999-2005
Montana SV6
2005-2007
Sunbird
1988-1994
Sunfire
1995-2005
Torrent
2006
TransSport
1997-1999
TransSport APV
1990-1996
Vibe
2003-2008
SAAB
9-7x
2005-2009
SATURN
Relay
2005-2007
S Series
1991-1999
TOYOTA
Matrix
2003-2008
Five-Channel Amplifier, 65-Watts x 4ch +, 300-Watts x 1ch at 2-Ohm or 150W @ 4-Ohm
This CX-Series 1-channel amplifier by Kicker has an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ™ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Vertical mounting hardware included for another unique look
This Kicker 46CXA6605t amplifier delivers as much as 300W into one bass channel.
Specifications
MODEL
CXA660.5
Power (watts/ch) 4 Ohm Stereo
65x4
Power (watts/ch) 2 Ohm Stereo
90x4
Power (watts/ch) 4 Ohm Mono
180x2
Power (watts/ch) 4 Ohm Mono Sub Ch
150x1
Power (watts/ch) 2 Ohm Mono Sub Ch
300x1
CXRC Remote Bass Capable (sold sep.)
yes
Dimensions (in, cm)
(all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L)14-1/8, 35.7
Frequency Response (Hz):
10Hz-20kHz
Frequency Response (Hz – Sub Ch.):
25Hz-200Hz
Input Sensitivity:
250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio:
90dB
Active Crossover:
Amp 1-2: High Pass 10-200Hz @ 12dB/OctaveSub Channel: Low Pass 50-200Hz @ 12dB/Octave
Subsonic Filter:
25Hz @24dB/Octave
KickEQ™ Boost
Variable 0-6dB @40Hz
Kicker 46CXA6605t Manual
HD-Series Monoblock Class-D Wide-Range Amplifier, 750-Watts x 1ch @ 1.5-4-Ohms
This ultra-compact monoblock amplifier employs JL's Single-Cycle Control switching design and R.I.P.S. technology to deliver 750W of clean power into any impedance between 1.5 and 4Ω, giving you the highest degree of flexibility in designing your subwoofer system. Tight power supply regulation keeps distortion down and maximizes your bass quality. From a pure sound quality perspective, JL invites you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price.
While targeted primarily to subwoofer applications, the HD750/1 is a wide-range amplifier and can also be used to drive high-performance mid-range speaker systems.
This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls.
General Specifications
Frequency Response
6 Hz - 8 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power
>110 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Main Channels)
>88 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>500 / 50 Hz
Damping Factor @ 2 Ω
>250 / 50 Hz
THD+N @ Rated Power (Main Channels)
<0.03% @ 4 Ω
Input Voltage Range @ RCA Inputs
Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
60 A (AFS, AGU or MaxiFuse™)
@ 4 Ω
750 W RMS x 1
@ 3 Ω
750 W RMS x 1
@ 2 Ω
750 W RMS x 1
@ 1.5 Ω
750 W RMS x
JL Audio HD750/1 Brochure
PowerWedge-Series 10-Inch 400-Watt Enclosed Subwoofer System, 2Ω Sealed Enclosure
In this sealed Truck PowerWedge™ subwoofer system, JL harnesses the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω
General Specifications
Continuous Power Handling (RMS)
400 W
System Nominal Impedance
2 Ω
Enclosure Type
Sealed, truck enclosure
Finish
Black carpet
Grille Included
Black Steel Mesh
Physical Specifications
External Width (W)
19 in / 483 mm
External Height (H)
12.375 in / 314 mm
External Depth (D1)
6.25 in / 159 mm
External Top Surface Depth (D2)
4.1 in / 104 mm
Net Weight
21.2 lb / 9.6 kg
JL Audio CS110TG-TW3 Brochure
BassWedge-Series Dual 12-Inch 600-Watt Enclosed Subwoofer System, 2Ω Ported Enclosure
This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth.
Construction: MDF
Recommended amplifier power: 150 - 600WNominal Impedance: 2 Ω
General Specifications
Continuous Power Handling (RMS)
600 W
System Nominal Impedance
2 Ω
Enclosure Type
Slot-ported
Finish
Gray carpet
Grille Included
No
Physical Specifications
External Width (W)
31.375 in / 797 mm
External Height (H)
15.18 in / 386 mm
External Depth (D1)
20.3 in / 516 mm
External Top Surface Depth (D2)
15.75 in / 400 mm
Net Weight
60.3 lb / 27.35 kg
JL Audio CP212-W0v3 Brochure
C2-Series 5x7-Inch 60-Watt Coaxial Speaker System
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to JL's 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.
The C2-570x system features 5 x 7 / 6 x 8-inch (125 x 180 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Grilles are not available for this speaker system.
Sonic character: Clean and Dynamic
Sold as a pair.
General Specifications
Continuous Power Handling (RMS)
60 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
15 - 100 W / Ch.
System Efficiency
90.5 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
53 Hz - 22 KHz ± 3 dB
JL Audio C2-570x Manual
C1-Series 5.25-Inch 50-Watt Coaxial Speaker System
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-525x is a proprietary, stamped, steel 5.25-inch (130 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
General Specifications
Continuous Power Handling (RMS)
50 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
10 - 75 W / Ch.
System Efficiency
89.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
54 Hz - 24 KHz ± 3 dB
JL Audio C1-525x Manual
TW1-Series 400-Watt Amplified 10-Inch Ported Subwoofer System
With MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 subwoofer driver. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.
Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.
Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω
General Specifications
Continuous Power Handling (RMS)
Built-in amplifier 400 W @ 0.25 Ω
System Nominal Impedance
0.25 Ω
Input Voltage Range @ RCA Inputs
70 mV - 1.40 V RMS
Input Voltage Range @ High-Level Inputs
280 mV - 5.4 V RMS
Recommended Copper Power / Ground Wire Gauge
8 AWG wire
Fuse Rating
30 A (ATO or ATC)
Enclosure Type
Slot-ported, Low-profile
Finish
Black carpet
Grille Included
Black Steel Mesh
JL Audio MicroSub+/PowerWedge+ Manual
