XDM-Series Monoblock Class-D Marine-Grade Amplifier, 600-Watts @ 2-Ohm or 400-Watts @ 4-Ohm
This potent monoblock amplifier employs JL-Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600W of continuous power into a 2-ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
@ 4 Ω
400 W RMS x 1 @ 14.4V
@ 3 Ω
500 W RMS x 1 @ 14.4V
@ 2 Ω
600 W RMS x 1 @ 14.4V
@ 1.5 Ω
N/A
@ 4 Ω
300 W RMS x 1 @ 12.5V
@ 3 Ω
400 W RMS x 1 @ 12.5V
@ 2 Ω
500 W RMS x 1 @ 12.5V
@ 1.5 Ω
N/A
Frequency Response
7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power
>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W
>67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>1000 / 50 Hz
Damping Factor @ 2 Ω
>500 / 50 Hz
THD+N @ Rated Power
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
50 A (AFS, AGU or MaxiFuse™)
Filter Mode(s)
Low-Pass only
Filter Slope(s)
12/24 dB/octave
Filter Frequency Range
50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer
Yes
Filter Defeat Function
Yes
Infrasonic Filter
30 Hz, defeatable
Bass Boost EQ
No
Output Polarity Switch
No
Remote Subwoofer Level Control
Optional HD-RLC or MHD-RLC (water-resistant)
Remote Bass EQ Boost Control
No
Pass-Through Preamp Output
Buffered
Height (H)
2.05 in / 52 mm
Width (W)
8.52 in / 216 mm
Depth (D)
7.09 in / 180 mm
Net Weight
6.3 lb / 2.86 kg
JL Audio XDM600/1 Manual
XDM-Series Five-Channel Class-D Marine-Grade Amplifier, 75-Watts x Four-Channels @ 4-Ohm and 600-Watt Mono @ 2-Ohm
The XDM1000/5 delivers up to 1000W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75W x 4 @ 4Ω), while also generating a stout 600W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is JL-Audio's high-speed NexD switching amplifier design.
Suitable for car or boat installations, the XDM1000/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM1000/5 includes a 12dB / octave high-pass filter for one main channel pair, a 12dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500Hz or 500-5000Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Main Channels @ 4 Ω
75 W RMS x 4 @ 14.4V
Main Channels @ 2 Ω
100 W RMS x 4 @ 14.4V
Main Channels - Bridged @ 4Ω
200 W RMS x 2 @ 14.4V
Subwoofer Channel @ 4 Ω
400 W RMS x 1 @ 14.4V
Subwoofer Channel @ 3 Ω
500 W RMS x 1 @ 14.4V
Subwoofer Channel @ 2 Ω
600 W RMS x 1 @ 14.4V
Subwoofer Channel @ 1.5 Ω
N/A
Main Channels @ 4 Ω
60 W RMS x 4 @ 12.5V
Main Channels @ 2 Ω
90 W RMS x 4 @ 12.5V
Main Channels - Bridged @ 4Ω
180 W RMS x 2 @ 12.5V
Subwoofer Channel @ 4 Ω
360 W RMS x 1 @ 12.5V
Subwoofer Channel @ 3 Ω
480 W RMS x 1 @ 12.5V
Subwoofer Channel @ 2 Ω
600 W RMS x 1 @ 12.5V
Subwoofer Channel @ 1.5 Ω
N/A
Frequency Response (Main Channels)
12 Hz - 22 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel)
10 Hz - 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Main Channels)
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>150 / 50 Hz
Damping Factor @ 2 Ω
>75 / 50 Hz
THD+N @ Rated Power (Main Channels)
<1% @ 2 Ω per Ch.
THD+N @ Rated Power (Subwoofer Channels)
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
80 A (AFS, AGU or MaxiFuse™)
Filter Mode(s): Channels 1 & 2 (front)
High-Pass only
Filter Slope(s): Channels 1 & 2 (front)
12 dB/octave
Filter Frequency Range: Channels 1 & 2 (front)
50 Hz - 5 kHz
Filter Mode(s): Channels 3 & 4 (rear)
High-Pass or Bandpass
Filter Slope(s): Channels 3 & 4 (rear)
12 dB/octave
Filter Frequency Range: Channels 3 & 4
50 Hz - 500 Hz
Filter Mode(s): Subwoofer Channel
Low-Pass only
Filter Slope(s): Subwoofer Channel
12/24 dB/octave
Filter Frequency Range: Subwoofer Channel
50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers
Yes
Filter Defeat Function
Yes
Infrasonic Filter: Subwoofer Channel
none
Remote Level Control
Optional HD-RLC or MHD-RLC (water-resistant)
Remote Level Modes
Sub Ch. or All Channels
Channel Input Mode Switch
Yes (2/4/6 ch.)
Pass-Through Preamp Output
None
Source Channel Selection for PreOuts
N/A
Height (H)
2.05 in / 52 mm
Width (W)
14.73 in / 374 mm
Depth (D)
7.09 in / 180 mm
JL Audio XDM1000/5v2 Manual
Add-On Amplifier OEM Integration Interface for Select 2011-UP Ford Vehicles
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Designed to provide (2) channels of low-level audio output from the factory system
Allows for the installation of an amplifier for speakers or subwoofers
Gain Controller included to adjust the overall output
12v-500mA remote wire activated with signal sense
55 watts per channel
Contents
AXLOC-FD2 Wiring Harness
Gain Controller
12v-500mA Remote Wire
Auxiliary Cable
Applications
FORD
Edge
non-amplified
2011-2020
Escape
non-amplified
2013-2019
Explorer
non-amplified
2011-2019
F-150
non-amplified
2013-2020
F250/F350/F450/F550
non-amplified
2013-2019
Fiesta
non-amplified
2011-Up*
FLEX
non-amplified
2013-2019
Focus
non-amplified
2012-2018
Fusion
non-amplified
2013-2020
Mustang
non-amplified
2015-2020
Ranger
non-amplified
2019-2020
TAURUS
non-amplified
2013-2019
Transit 150/250/350
non-amplified
2015-2019
Transit Connect
non-amplified
2014-2018
Axxess AXLOC-FD2 Manual
Amplifier Mounting Bracket for Under-The-Seat Locations in Select 2018-UP Jeep Wrangler-JL and Gladiator-JL Vehicles
The SBA-J-JLU-UAR Universal Amplifier Rack fits under either front seat to securely mount one of several different JL Audio amplifier models (sold separately). Featuring an angled design to maximize rear seat foot space, the SBA-J-JLU-UAR Amplifier Rack requires no drilled holes and installs using factory hardware. Engineered and Built in USA.
Includes predrilled mounting locations and hardware to install one of the following amplifier models:
VXi: All models.XDv2: All models, except XD800/8v2, XD1000/1v2 and XD1000/5v2.*M-Series: All models, except M800/8v2, M1000/1v2 and M1000/5v2.RD: All models, except RD1000/1, RD1500/1 and RD900/5.MX: All models; up to two of MX280/4 and MX300/1.*** includes XD versions** includes HX and MHX versions
JL Audio SBA-J-JLU-UAR Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2009-2018 Ram Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3 inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
CMOS 1/4 sensor
Resolution: 400 TV lines
Field of view: Diagonal 168, Horizontal 136, vertical 100
0.1 Lux
IP69
Defeatable parking lines
26 feet of extension cable
3 Year warranty
Applications
RAM
1500
2009-2018
2500
2010-2018
iBeam TE-DGH Manual
DIN or DDIN Aftermarket Radio Installation Dash-Kit for Select 2000-2001 Audi A4 Vehicles
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that can be installed above or below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is contoured and textured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” tall aftermarket radio
Contoured and textured to compliment the factory dash
Interchangeable design allows for the recessed Single-DIN opening to be above or below the included pocket
Two sets of our 86-9001 radio removal tool are recommended for easier removal of the factory radio from the dash
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and detailed installation instructions
* NOTE: Once the Double-DIN kit is installed, the factory dash will need to be removed if the dash kit or aftermarket radio should need to be replace
Applications
AUDI
A4, S4
w/ Symphony radio
2000-2001
Metra 99-9105 Installation Manual
Head-Unit Replacement Accessory and USB-Retention Cable for Select 2012-2020 Honda, Scion, Subaru and Toyota Vehicles
Converts the factory USB port cable into standard full size male USB so it can be plugged into an aftermarket radio.
Click Here to View Vehicle Coverage Information
DDIN-Size Head-Unit Replacement Dash-Kit for Select 2011-2013 Jeep Grand-Cherokee and Dodge Durango Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant matte black to match the original look and feel of the vehicle's dashboard.
Stereo installation kit designed to fit any standard 4" tall DDIN aftermarket radio
Painted scratch-resistant matte black
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets and detailed installation instructions
Applications
DODGE
Durango
2011-2013
JEEP
Grand Cherokee
2011-2013
Metra 95-6513B Installation Manual
Double-DIN Size Head-Unit Replacement Dash-Kit for Select 2010-2014 Subaru-Outback and Legacy Vehicles
This stereo installation kit is engineered to help you install an aftermarket 4" tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement simple and is painted scratch-resistant silver to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 4" tall aftermarket radio with an ISO-mount provision
Painted scratch-resistant silver 95-8903S (also available in scratch-resistant matte black: 95-8903B)
Designed for models without factory navigation
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes mounting brackets with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
SUBARU
Legacy
w/ factory amp
2012-2014
Legacy
w/o factory amp (display radio)
2012-2014
Legacy
w/o factory amp (base radio)
2012-2014
Legacy
2010-2011
Outback
w/ factory amp
2012-2014
Outback
w/o factory amp (display radio)
2012-2014
Outback
w/o factory amp (base radio)
2012-2014
Outback
2010-2011
Metra 95-8903 Installation Manual
DC Power Cables for Commercial Grade iBeam Video Cameras
Provides power to the adapter cable included with iBeam commercial cameras
To be used when connecting to a RCA input monitor
12-inch in length
18-gauge wire
Sold individually
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Interface for Select 2006-2016 BMW and MINI Vehicles
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, and V.S.S)
Retains warning chimes
For non-amplified models, or when bypassing a factory amplifier
Retains balance and fade
Micro-B USB updatable
Non-Amplified Applications
BMW
1 Series
2008-2013
3 Series
2006-2013
M3
2007-2013
MINI
Clubman (R55)
2008-2014
Convertible (R57)
2009-2015
Countryman (R60)
2011-2016
Coupe (R58)
2012-2015
Hatchback (R56)
2007-2013
Roadster (R59)
2012-2015
Amplified Applications
MINI
Countryman (R60)
2011-2016
Axxess Interface AXRC-BW1 Manual
Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles
This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features.
Benefits
Simplifies amplifier installation
Prevents need for summing and DSP devices
Provides factory sound system upgrade solution
Provides flat audio output for a solid audio foundation
Features
Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier
Enables the addition of a subwoofer to an amplified sound system
Variable volume, fade, balance, bass, mid and treble audio settings
Front, rear, sub preamp outputs (5 volt RMS)
Customized OE bass, mid and treble center frequency selection
Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes
Plug-n-Play installation
Sub level controller
Optional TOSLINK optical output (APA-TOS1 sold separately)
Includes
AmpPRO module
52-pin harness (MS-CAN)
Bass knob with harness
Manual
Also available for fast, easy install: APH-CH01 harness (sold separately)
Select non-amplified vehicles are equipped with an ANC system that requires bypass. Plug-n-Play bypass harness: ANC-CH01
Applications
Compatible with both amplified and non-amplified factory systems.
Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present.
When installing into any of the following vehicles, the APHCH42 is required (sold separately):
CHRYSLER
200
ALL TRIM LEVELS
2015-2017
300
ALL TRIM LEVELS
2015-2022
PACIFICA
ALL TRIM LEVELS
2017-2022
DODGE
CHALLENGER
ALL TRIM LEVELS
2015-2022
CHARGER
ALL TRIM LEVELS
2015-2022
DURANGO
ALL TRIM LEVELS
2014-2020
DURANGO
ALL TRIM LEVELS w/10.1" Screen
2021
DURANGO
ALL TRIM LEVELS w/8.4" Screen
2021
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
JEEP
CHEROKEE
ALL TRIM LEVELS
2015-2021
GLADIATOR
ALL TRIM LEVELS
2020-2022
GRAND CHEROKEE
ALL TRIM LEVELS
2014-2020
GRAND CHEROKEE
WK
2021-2023
WRANGLER
JL
2018-2023
WRANGLER
4XE
2021-2022
WRANGLER
ALL TRIM LEVELS
2024
WRANGLER UNLIMITED
JL
2018-2023
WRANGLER UNLIMITED
ALL TRIM LEVELS
2024
MASERATI
LEVANTE
ALL TRIM LEVELS
2018
QUATTROPORTE
ALL TRIM LEVELS
2017
RAM
RAM TRUCK
ALL TRIM LEVELS
2013-2021
RAM TRUCK
NON-CLASSIC
2022
Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin
Replacement Two-Way or Add-On Echo Style One-Button Remote Start Controller
OmegaLink state-of-the-art vehicle security platform offers unsurpassed vehicle protection that can only be offered by OmegaLink's legacy.
Features:
One 1-button 2-way remote and one 1-button 1-way remote
Direct plug-into ANY OmegaLink Data Start System or OL-MDB-ALL using RS Firmwares
Up to 3,000 feet of range
Supports LOCK, UNLOCK, & START/STOP
High visibility LED’s in window-mount antenna
Bright blue LED flashes to indicate button presses and confirm functions (2-way remotes only)
Stylish remote design to compliment any vehicle
Backed by our legendary Limited Lifetime Warranty.
This Kit Is Compatible With:
OmegaLink Data-Start Systems
OL-MDB-ALL with RS Firmware
Kit Includes:
One 1-button 2-way remote
One 1-button 1-way remote
2-way antenna module
Antenna harness
Batteries
Quick reference user guide
MM-Series 400-Watt RMS 10-Inch Subwoofer Driver, 4-Ohm SVC
The fiberglass-reinforced ABS basket resists flexing during heavy excursion, so your sub hits hard without distorting. Ultra-Marine certification and an IP56 rating.
Specifications
10" 4-ohm subwoofer
Titanium-plated composite cone
Butyl rubber surround
Fiberglass-reinforced ABS basket
IP56 rating
Power handling: 400W RMS
Peak power handling: 1200W
Frequency response: 28-2000Hz
Sensitivity: 86dB @ 1W/1M
Top mounting depth: 4.35"
Cutout diameter: 9.1"
Grille not included
Warranty: 1 year
Polk Audio MM1 Subwoofer Manual
Input Voltage of 10V to 24V*, Selectable Output to 3.3V, 5V, 6V or 9V
No programming is required. Use the 4-position switch to select the desired voltage output and install the VOLT-39.
Not intended for installation in 24V systems
Aftermarket Head-Unit Replacement Maestro-Module T-Harness for Select 2008-2015 Subaru Vehicles
Radio replacement T-harness for for select Subaru vehicles 2008-2015. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Head-Unit Replacement USB Adapter-Cable for Select 2015-2018 Subaru Vehicles
Connects the factory USB port to an aftermarket radio in select Subaru vehicles.
Click here to view vehicle coverage
DIN-Size Head-Unit Replacement Dash-Kit for Select 1982-2000 GMC, Ford, Jeep, Lincoln, Mazda and Mercury Vehicles
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle's dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this dash kit to make it fit.
Professional Installer Series TurboKit designed to fit any standard 2” tall aftermarket radio
The Metra 86-5618 radio removal tool is required to pull the factory radio from the dash
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes factory-style rear support, brackets, and hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
FORD
Aerostar
1985-1997
Bronco
1987-1996
Bronco II
1985-1990
Crown Victoria
1992-1994
Econoline
1992-1996
Escort
1985-1996
Escort EXP
1985-1996
Explorer
1991-1994
F-Series
1987-1996
F-250/350
1997
Festiva
1988-1993
LTD
1982-1991
LTD Crown Victoria
1982-1991
Mustang
1994-2000
Probe
1993-1997
Ranger
1983-1994
Taurus
1986-1995
Tempo
1989-1994
Thunderbird
1983-1988
Windstar
1995-1998
LINCOLN
Continental
1985-1994
Mark VII
1984-1992
Mark VIII
1993-1994
Town Car
1985-1994
MAZDA
626
1993-2000
B-Series Pickup
1994
MX-3
1992-1996
MX-6
1993-1997
Navajo
1991-1993
Protégé
1995-2000
MERCURY
Capri
1991-1994
Cougar
1983-1997
Grand Marquis
1979-1994
Lynx
1985-1987
Marquis
1979-1986
Sable
1986-1995
Topaz
1989-1994
Tracer
1988-1996
Villager
1993-1995
JEEP
Cherokee
1984-1996
Comanche
1985-1992
Wrangler
1984-1996
Metra 99-5510 Installation Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2007-2019 Mercedes-Sprinter and VW-Crafter Vehicles
Metra's iBeam 1/3 inch CMOS third brake light backup camera fits Mercedes Sprinter or Volkswagen Craft models 2007 – 2019. The sleek water resistant design is a direct replacement for OEM factory brake lights offering a perfect fit. With a 170 degree viewing angle built-in microphone and 0 lux IR LED night vision this camera provides a clear representation of all activity directly behind the vehicle under any conditions. Defeatable parking lines allow drivers to maneuver their vehicle with confidence. Includes all necessary cables for installation – with a 4-Pin Din to RCA adapter as an added bonus.
Specifications:
Direct replacement for OEM third brake light
Water resistant design
1/3 inch CMOS camera
170 degree viewing angle
0 lux IR LED night vision
Defeatable parking lines
Includes 10 meter video cable with 4-Pin Din connector
Includes 4-Pin Din to RCA adapter cable
Built-in microphone
Applications
MERCEDES
Sprinter
2019 - Shop Confirmed
Sprinter
2007-2018
VOLKSWAGEN
Crafter
2007-2018
iBeam TE-3BMC Manual
3-1/2" Coaxial Speaker Drivers, 50-Watt RMS
The Kicker KS series three-and-a-half-inch coaxial speakers let you play at concert-like volume, yet maintain the smoothness and subtlety to please even the most selective ear. They work best with 15 to 50 watts of recommended power.
High power handling
Tough rubber surrounds
Thin-mount design easily fits behind factory grilles
Specifications
Speaker Design
2-Way
Woofer [in, mm]
3-½, 89
Tweeter [in, mm]
½, 13
Rated Impedance [Ω]
4
Recommended Amplifier Power [Watts RMS]
15-50
Sensitivity [1W, 1m]
88
Frequency Response [Hz]
80-20k
Mounting Hole Diameter [in, mm]
3-1⁄16, 78
Top Mount Depth [in, mm]
1-5⁄8, 41.5
Bottom Mount Depth [in,mm]
1-7⁄8, 49
Tweeter Protrusion [in,mm]
3/16, 4
Grilles
No
Tweeter Magnet Material
Neodymium
Tweeter Dome Material
Silk
Woofer Cone Material
Polypropylene
Woofer Surround Material
Rubber
Kicker KS Series Coaxial Speaker Manual
6.75-Inch 150-Watt Thin Subwoofer Driver, 1-Ohm or 2-Ohm DVC
The CompRT 6.75" thin subwoofer by Kicker is a weather resistant thin sub with a 1Ω or 2Ω dual voice coil design. This thin 6.75 inch sub magnet structure delivers 150W RMS of power with a chassis mounting depth of 2 3/4". The Kicker designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to keep this 6.75" CompRT thin subwoofer driver nice and cool.The CompRT 6.75-Inch subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power.
Specifications
SIZE [in, cm]:
6 13/16, 17.3
IMPEDANCE [Ohms]:
2 or 4 DVC
Recommended Amplifier Power (watts RMS)
150
Peak Power (watts, per ANSI/CTA-2031-A)
300
SENSITIVITY [dB 1w/1m]:
82.6
MOUNTING DEPTH [in, cm]:
2 3/4, 7
MOUNTING DIAMETER [in, cm]:
5 5/8, 14.3
MIN SEALED BOX VOL [cu. ft, L]:
0.18, 5.1
MAX SEALED BOX VOL [cu. ft, L]:
0.75, 21.24
Kicker CompRT Subwoofer Manual
JD-Series 75-Watt x 4-Channel Class-D Full-Range Amplifier
Utilizing JL Audio's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms.
The JD400/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment.
Onboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier.
General Specifications
@ 4 Ω
75 W RMS x 4
@ 2 Ω
100 W RMS x 4
Bridged @ 4Ω
200 W RMS x 2
Frequency Response
12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power
>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W
>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>150 / 50 Hz
Damping Factor @ 2 Ω
>75 / 50 Hz
THD+N @ Rated Power
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
40 A (AFS, AGU or MaxiFuse™)
Filter Mode(s)
Low-Pass or High-Pass
Filter Slope(s)
12 dB/octave
Filter Frequency Range
50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers
No
Filter Defeat Function
Yes
Remote Level Control
No
Remote Level Modes
N/A
Channel Input Mode Switch
Yes (2/4 ch.)
Pass-Through Preamp Output
Buffered
Source Channel Selection for PreOuts
No (always 2 Ch)
JL Audio JD400/4 Manual
SiriusXM Radio Dock & Play Vehicle Kit
Move your Dock & Play Radio from another location to listen in your vehicle with one subscription
Hear SiriusXM through your existing vehicle stereo with easy do-it-yourself installation
Compatible with SiriusXM, XM and Sirius Dock & Play Radios working on either the XM or Sirius network
If you want to hear your SiriusXM programming through your vehicle stereo, this kit provides all you need.
Using PowerConnect™and the color-coded dock, installation is a snap and now you'll be listening satellite radio in a second car.
Single Seat Heater Kit with Hi/Low Settings. Save $50 on the installation of a new seat heater, with purchase and installation of a new Automatic Remote Start System in your vehicle.
Single Seat Heater Kit
Carbon Fiber Technology
Illuminated 3 Position Switch
OE Build Grade
2 - 18'' X 9'' Trimable Pads
3yr Warranty
ECHO Remote Upgrade kit with 2-way Communication and a 1-button remote. 1,500 ft of Range
The Omega ECHO upgrade kits are modular two-way remote controller transceivers that simply plug into any compatible Omega vehicle security system. The ECHO-1 upgrade kit will put the status of your vehicle at your finger tips. This powerful transceiver extends operating range to as much as 1,500 feet so every command can be confirmed, even when your vehicle is out of sight. The ECHO-5 is compatible with any "E, EDP, or EDPB" system.Features:• Flashing LED and audible confirmation for remote start and unlock• 433 MHZ super heterodyne technology• Up to 1,500 feet of range• Uses 1 CR2032 battery• Beep & mute modes• Runtime expiration warning • Antenna with integrated LED's & valet
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2005-2011 Toyota-Tacoma Vehicles, textured gray
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard. This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio. The dash kit is painted gray and “golf ball” textured to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” or 4” (with an ISO-mount provision) tall aftermarket radio utilizing our patented quick-release, snap-in ISO mount system with custom trim ring
Painted gray and “golf ball” textured (also available in black: 99-8214TB)
Factory climate controls are retained in their current location
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and hardware parts needed with detailed installation instructions
Applications
TOYOTA
Tacoma
w/ gray color dash
2005-2011
Metra 99-8214TB Installation Manual
DIN-Size Head-Unit Replacement Dash-Kit for Select 1974-2003 Chrysler, Dodge, Eagle, Ford, Jeep, and Plymouth Vehicles
This stereo installation kit has been engineered to help you install a 2” tall (Single-DIN) aftermarket radio into the original vehicle dashboard, making radio replacement simple. The dash kit is designed to match the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
Stereo installation kit designed to fit any standard 2” tall aftermarket radio utilizing our patented “Side Arm Support System” for radio side support
Provides a recessed radio opening with an adjustable depth feature
Made from the highest quality ABS plastic for an original factory-like fit and finish
Includes brackets and the hardware parts needed with detailed installation instructions
A tech support number is available for installation help 7 days a week
Applications
CHRYSLER
Cordoba
1975-1983
E-Class
1983-1984
Fifth Avenue
1979-1993
Horizon
1978-1983
Imperial
1990-1993
Laser
1984-1989
LeBaron
1977-1995
LeBaron GTS
1984-1995
Newport
1977-1980
New Yorker
1975-1996
Town & Country
1990-2000
DODGE
Aries
1981-1989
Aspen
1976-1980
Avenger
1995-2000
Caravan
1984-2000
Charger
1974-1987
Dakota
1987-2000
Daytona
1984-1993
Diplomat
1980-1989
Durango
1998-2000
Dynasty
1988-1993
Lancer
1986-1989
Mirada
1979-1983
Neon
1995-1999
Omni
1978-1990
Ram Pickup 1500
1994-2001
Ram Pickup 2500, 3500
1994-2002
Ram Pickup 150, 250, 350
1974-1993
Ram Charger
1981-1993
Ram Van
1978-2003
Shadow
1987-1994
Spirit
1989-1995
St. Regis
1979-1981
EAGLE
Vision
1993-1997
JEEP
Cherokee
1997-2001
Grand Cherokee
1993-1998
Wrangler
1997-2002
PLYMOUTH
400
1982-1983
600E Class
1983-1987
Acclaim
1989-1995
Caravelle
1985-1988
Gran Fury
1978-1989
Horizon
1984-1990
Neon
1995-1999
Reliant
1981-1989
Sundance
1987-1994
TC3
1981-1982
Trail Duster
1975-1981
Turismo
1983-1987
Volare
1976-1980
Voyager
1984-2000
Metra 99-6501 Installation Manual
Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 2000-2007 Toyota and Lexus Vehicles
Wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Retains factory analog amplifier and speakers
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Amplified Applications
TOYOTA
4Runner
2000-2002
Avalon
2000-2004
Camry
2002-2006
Camry Solara
2000-2003
Celica
2000-2005
Highlander
2001-2007
Land Cruiser
2000-2007
Sequoia
2001-2004
Sienna
2000-2003
Solara
1999-2003
Tacoma
2000-2004
Tundra
2000-2005
LEXUS
ES 330
2002-2006
ES 300
2000-2001
Head-Unit Replacement Wiring-Harness Adapter for Select 1991-2001 Toyota and Lexus Vehicles
Factory amplifier integration wiring harness for fast and easy radio installation
Plugs into the car’s original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Applications
TOYOTA
4Runner
1992-1999
Avalon
1995-1999
Camry
1992-2001
Camry Solara
1999
Celica
1994-1999
Land Cruiser
1993-1999
MR2
1991-1995
Previa
1991-1997
Sienna
1996-1999
Supra
1994-1998
Tacoma
1995-1999
LEXUS
ES 300
1992-1999
LS 400
1993-1994
LX 450
1996-1997
SC 300
1992-2000
SC400
1992-2000
Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1985-2002 Ford, Lincoln, Mazda and Mercury Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
FORD
Aerostar
1985-1997
Aspire
1995-1997
Bronco
1986-1996
Bronco II
1989-1990
Contour
1995-2000
Crown Victoria
1992-1994
Econoline
1986-1997
Escort
1991-1996
Escort, Escort EXP
1986-1990
Explorer
1991-1994
F-150
1997-1998
F-250
1998
F-250/350
1997
F-Series Pickup
1986-1996
LTD/LTD Crown Victoria
1986-1991
Mustang
1986-1998
Probe
1988-1997
Ranger
1986-1997
Taurus
1986-1995
Tempo
1986-1994
Thunderbird
1986-1997
Windstar
1995-1998
JAGUAR
S-type
2000-2002.5
LINCOLN
Continental
1986-1994
Mark VII
1986-1992
Town Car
1986-1994
MAZDA
B-Series Pickup
1994-1997
Navajo
1991-1994
MERCURY
Capri
1986-1994
Cougar
1986-1997
Grand Marquis
1986-1994
Lynx
1986-1987
Mystique
1995-2000
Sable
1986-1995
Topaz
1986-1994
Tracer
1991-1996
Villager
1993-1998
NISSAN
Quest
1993-1998
Amplified or Non-Amplified Head-Unit Replacement Wiring-Harness Adapter for Select 1998-2013 Honda, Acura and Suzuki Vehicles
Install a new car radio faster with this wiring harness that plugs right into the vehicle's connectors, allowing you to hook up the radio into the vehicle's electrical system. On one side, the wiring harness is color-coded with wires that you'll connect or solder into the aftermarket radio/receiver. The other side has a vehicle-specific adapter that connects directly into the original radio connectors for a quicker installation without having to cut each of the wires.
Keep in mind that you may need additional parts to complete your installation, including a dash kit, antenna adapter, and, depending on your vehicle, a special interface adapter to retain audio controls on your steering wheel or other important vehicle functions like navigation, video, and more. Look up your vehicle for more information.
Wiring harness for fast and easy radio installation
Plugs into the car's original radio connectors on one side
Color-coded wires on the other side are connected to the aftermarket radio
No wire cutting needed for factory radio connectors
Provides electrical power to the radio for a four-speaker connection
Non-Amplified Applications
ACURA
CL
2001-2003
MDX
2001-2006
NSX
2005
RSX
2002-2006
TL
1999-2008
HONDA
Accord
1998-2002
Civic
1999-2011
CR-V
1999-2006
Element
2003-2011
Insight
2001-2006
Odyssey
1999-2007
Pilot
2003-2008
Prelude
1999-2001
Ridgeline
2005-2008
S2000
2000-2009
ISUZU
Oasis
1999
SUZUKI
Aerio
2005-2007
Aerio 5-door
2002-2004
Aerio Sedan
2002-2004
Grand Vitara
2003-2011
Kizashi
2010-2013
SX4
2007-2013
XL-7
2003-2006
Amplified Applications
HONDA
Pilot
(without factory subwoofer)
2003-2008
SUZUKI
SX4
2007-2013
Head-Unit Replacement Adapter Cable for Select 1973-2017 Audi, BMW, Mercedes VW and Other Vehicles
If you are replacing the radio in your vehicle, this antenna cable adapter ensures that you can continue to use your factory antenna. It is a simple yet necessary cable that adapts the vehicle’s original antenna cable to plug into an aftermarket radio with a male Motorola™ connector on one end and a female Volkswagen/Audi European-style connector on the other.
Antenna adapter cable
Used to adapt the vehicle’s antenna cable to use with an aftermarket radio
Male Motorola™ connector on one end
Female Volkswagen/Audi European-style connector on the other end
Enter your vehicle model to see if this is compatible with your vehicle
NOTE: Some newer European radios also have capacitors which do not allow this adaptor to work properly, use 40-VW12
Applications
AUDI
80 Series
1988-1992
90 Series
1988-1995
100 Series
1989-1994
200 Series
1989-1991
A4
1996-1997
A6
1998-2001
S8
2000-2003
A8
1997-2003
allroad quattro
2001-2003
BMW
3 Series
1992-2006
ALPINA D10
1997-2000
5 Series
1990-2000
7 Series
1990-2001
M
1998-2002
M3
1995-2006
M5
1991-1993
Z3
1996-2002
Z8
2000-2003
BUICK
LeSabre
2000-2005
CADILLAC
CTS
2003-2007
CTS-V
2003-2007
SRX
2004-2006
DODGE
Sprinter
2007-2009
FORD
Focus
2003-2004
Transit Connect
2010-2012
FREIGHTLINER
Sprinter
2007-2013
LAND ROVER
Freelander
2002-2005
Range Rover
1995-2002
MERCEDES
Sprinter
w/Radio Delete only
2010-2017
MERCURY
Cougar
1999-2002
OLDSMOBILE
Aurora
2001-2003
PONTIAC
Bonneville
2000-2005
GTO
2004-2006
PORSCHE
911 (996)
1999-2002
911 (993)
1994.5-1998
911
1973-1994
928
1994-1996
968
1992-1996
Boxter (986)
1997-2004
RAM
ProMaster
2014-2017
SAAB
9-2x
2005
9-3
1999-2006
9-5
1998-2005
SMART
ForTwo
2008-2015
VOLKSWAGEN
Cabrio
1995-2002
Corrado
1990-1993
Euro Van
1993-2003
Golf
1986-1997
GTI
1986-1994
Jetta
1993-1997
Passat
1990-1997
Quantum
1982-1987
Mono Amplifier, 300-Watts at 2-Ohm, 150-Watts at 4-Ohm
This CX-Series 1-channel amplifier by Kicker has an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ™ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Vertical mounting hardware included for another unique look
This Kicker 46CXA4001t amplifier delivers as much as 400W into one bass channel at 1-Ohm.
Specifications
MODEL
CXA400.1
Power (watts/ch) 4 Ohm
150x1
Power (watts/ch) 2 Ohm
300x1
Power (watts/ch) 1 Ohm
400x1
CXRC Remote Bass Capable (sold sep.)
yes
Dimensions (in, cm): (all models 2 3/8, 5.9H x 6 3/4, 17W x ...L)
8 1/8, 20.6
Frequency Response (Hz):
25-200, +0/-1dB
Input Sensitivity:
250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio:
>95dB, a-weighted, re: rated power
Active Crossover:
Variable Lo-pass 50Hz–200Hz, 12dB/octave
Subsonic Filter:
25Hz @24dB/octave
KickEQ™ Boost
Variable 0-6dB @40Hz
Kicker CXA Mono Amplifier Manual
TW1-Series 400-Watt Amplified 10-Inch Subwoofer System
In PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs JL's exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.
Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.
Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)Nominal Impedance: 0.25 Ω
Enclosure and Subwoofer Built in USA with global components
General Specifications
Continuous Power Handling (RMS)
Built-in amplifier 400 W @ 0.25 Ω
System Nominal Impedance
0.25 Ω
Input Voltage Range @ RCA Inputs
70 mV - 1.40 V RMS
Input Voltage Range @ High-Level Inputs
280 mV - 5.4 V RMS
Recommended Copper Power / Ground Wire Gauge
8 AWG wire
Fuse Rating
30 A (ATO or ATC)
Enclosure Type
Sealed
Finish
Black carpet
Grille Included
Black Steel Mesh
JL Audio MicroSub+/PowerWedge+ Manual
W1-Series 10-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC
The JL Audio 10" W1v3 subwoofer driver is a very suitable option when space is limited with smaller amplifiers. It features a low mounting depth of 4.6 inches and a compact motor structure that allows it to comfortably fit in tight mounting locations. There is no pole vent on the rear of the subwoofer which allows the motor structure to be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow the 10W1v3 to reproduce sub-bass with shocking extension and quality.
The JL Audio 10W1v3 is best used with an amplifier in the 75W - 300W RMS range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.
General Specifications
Continuous Power Handling
300W RMS
Recommended Amplifier Power
75W - 300W RMS
Nominal Impedance
2Ω/4Ω
JL Audio 10W1v3 Manual
Tailgate-Mountable Backup-Camera for Select 1997-2004 Ford F-150 and 1999-2007 F-150 Super-Duty Pickups
Upgrade the factory tailgate handle with an unobtrusive rearview backup camera. This CMOS .25” sensor provides a sharp, clear picture and is rated IP69. With a wide field of view, 0.1 lux night vision and defeatable parking lines, it allows the driver to backup their vehicle day or night with confidence.
Fits Ford F-150 1997-2005 & Super Duty 1999-2007
Replaces OE handle
CMOS 1/4 sensor
Resolution: 400 TV lines
Field of view: diagonal 168 degrees, horizontal 136 degrees, Vertical 100 degrees
0.1 LUX
IP69
defeatable parking lines
26 ft extension cable
3 year warranty
Applications
FORD
F-150
1997-2004
F-250, F-350, F-450, F-550
SuperDuty
1999-2007
iBeam TE-FDFTG Manual
You can rely on INE-W970HD’s navigation system for access to the most up-to-date maps of the United States and Canada. Choose 3D mapping for a realistic viewing option that allows you to see your map in vivid detail or get fast and easy directions from start to finish with turn-by-turn instructions delivered by Text-to-Speech (TTS) technology.
Listen to your music, answer calls, respond to texts, and get directions hands-free with Apple CarPlay and Android Auto. Connect your smartphone via a USB input (additional bluetooth connection required for Android Auto).
Keep your eyes on the road and hands on the wheel with the INE-W970HD’s built-in bluetooth hands-free calling and streaming. The external pre-tuned microphone reduces noise interference and feedback for the best sound quality possible, so you can stay focused on your drive.
Now there are even more ways to listen to your favorite music with the INE-W970HD’s built-in HD Radio and SiriusXM capable (tuner and subscription required). The INE-W970HD also comes with a built-in DVD and CD mechanism and included HDMI input for non-stop entertainment (HDMI cable sold separately).
The INE-W970HD “Works with Apple CarPlay” and lets iPhone users make and receive calls, access text messages, play music, and get directions in a way that allows them to stay focused on the road. Apple CarPlay is accessed through the WVGA touchscreen and is compatible with iPhone 5 and later (iPhone must be connected via USB input).The INE-W970HD includes Android Auto and works with the Google Assistant (requires both a USB cable and bluetooth connection; requires an Android phone running 5.0 [Lollipop] or higher and the Android Auto app). Google Assistant in Android Auto allows users to play their favorite music, get driving directions to their destination, interact with smart home devices and reply to text messages – hands-free.
Features
6.5” Touchscreen
Apple CarPlay® (requires USB connection)
Android Auto™ (requires USB connection)
Bluetooth® Audio with Hands-Free
Built-in Navigation
Built-in HD Radio™
DVD/CD Player
SiriusXM-Ready™ (tuner sold separately)
Smartphone Mirroring via HDMI
Quick Access Sound Key
Specifications
Dimensions (WxHxD): 7" x 3.9" x 5.6"
Screen Resolution: WVGA (800x480)
Aspect Ratio: 16:9
Built-in Amplifier: 45W x 4
RCA Preouts: 3 (4V)
AUX Inputs: 1
USB Inputs: 2
Camera Inputs: 2 (Front and Rear)
HDMI Inputs: 1
Component Video Outputs: 1
16W RMS CEA-2006
Alpine INE-W970HD Manual Part 1Alpine INE-W970HD Manual Part 2Alpine INE-W970HD Installation Manual
Composite RCA to Direct Camera Adaptor for Alpine Head Units
Add an additional universal camera to your Alpine Head Unit with the KCX-CAM1 Additional Composite RCA to Direct Camera Adaptor (universal camera sold separately). The KCX-CAM1 is compatible with all Alpine Head Units that include a Direct Camera Input.
While all Alpine Head Units with Direct Camera Input include one Composite RCA to Direct Camera Adaptor, an adaptor is now available to purchase separately to add an additional universal camera to your vehicle for increased safety during your drive or assistance when maneuvering in and out of parking spots.
DDIN-Size 6.8-Inch Touchscreen Digital Mechless Media Receiver with Bluetooth, Wireless Apple CarPlay and Android Auto
The DMH-W3000NEX 6.8-inch display offers cutting-edge connectivity solutions tailored for today's smartphone-centric lifestyle. Featuring a capacitive touchscreen display on an L-Shape 1-DIN Chassis, it ensures flexible installation for seamless integration into your vehicle's dash. Key features include built-in Bluetooth, Android Auto, Apple CarPlay, and WebLink compatibility.
Minimize distractions with the new direct access buttons located on the left side of the unit. Perform quick interactions like making calls, initiate voice actions, go to app screens, and return to the main menu in 1-click instead of 2 to 3 times more interactions.
Change the layout of your main menu and make it the way you like and put aside the things you don’t need. Pioneer’s new NEX receivers are offering a host of options for AV sources and other car AV features. But it is not because this offer is large that it must be heavy on visuals and complicated for the access.
This Pioneer receiver supports a cable free connection between your smartphone using Wi-Fi wireless connectivity and is compatible with Android Auto, Apple CarPlay and Wi-Fi certified Miracast. Its your choice, wireless or wired.
Back up safely in any crowded parking area. Install a rear-view camera (sold separately) to use the receiver’s built-in parking guides for easy parking, with adjustable parking lines and full screen image for ease of use.
Specifications
Continuous Power Output 22 W x 4-Channel
Load Impedance Allowance 4 Ohm (4 ohms to 8 ohms Allowable)
Max Power Output 50W x 4-ch 4 ohms / 50 W X 2-ch 4 ohm
RCA Preamp Outputs 4V
RCA Pre-out 6-Channel
RMS Power Output (CTA-2006) 14 W RMS x 4-ch 4 ohms
DISPLAY
Back Light LED
Brightness Control Yes
Color Customization 5 Key Colors
Device (Non-DIN/Modular Unit) 1-DIN “L-Shape” Short Chassis
Dimmer Yes
Display Off Mode Yes
Home Screen Customization Yes
Monitor Mechanism Fixed
Resolution WVGA (800 x 480)
Screen Size/Aspect Ratio 6.8"/16:9
Touch Screen Capacitive Multi-Touch
NAVIGATION
External GPS Antenna Yes
BLUETOOTH
Advanced Audio Distribution Profile (A2DP) Yes
AVRCP 1.6
Built-in Bluetooth® Yes
Dual Phone Connection Yes
Hands Free Version 1.6
Hands-Free Yes
Microphone Included Included
Phone Registration 5 Phones
Secure Simple Pairing (SSP) Yes
Serial Port Profile (SPP) Yes
TUNER
Best Station Memory Yes
Local Seek tuning Yes
Presets 12 FM, 12 AM
PS (Preset Scan) Yes
RDS RBDS
SiriusXM-Ready™ (Tuner Sold Separately) Yes
INTEGRATION
Amazon Alexa via Pioneer Vozsis
Android Auto™ Wireless Connection or Wired USB Connection
Apple® CarPlay Wireless Connection or Wired USB Connection
Mobile Operating System Android / Apple iOS
Siri® Eyes Free (VR) (Internet Required) iPhone Only
Voice Control Yes
WiFi Tethering, WiFi Hotspot
DIGITAL MEDIA PLAYBACK
Audio Playback via USB WMA/MP3/WAV/AAC/FLAC
Audio Video Playback via USB H.264/H.263/VC-1/Mpeg4(MP4/AVI)/AVI/ MPEG1,2(PS)/Quick Time/WMV/MKV/FLV/TS
Image Display via USB BMP, JPEG, PNG
AUDIO
Bass Boost Yes
Balance Yes
Built-in Amplifier MOSFET 50 W x 4
Crossover Network Mode Yes
Crossover Standard Mode Yes
Customizable Graphic Equalizer 13 BAND, 6 PRESET
Fade Yes
Listening Position Selector Yes
Loudness High/Mid/Low/Off
Speaker Output 4-ch
Subwoofer Control Yes
EXPANDABILITY
Parking Assist Lines Yes
INPUTS
Input 1 Backup Camera Dedicated
Input 2 AUX (Minijack)
GENERAL
Detachable Face Security Fixed
Multi-Language Display English, French, Spanish Portuguese, Chinese (Simplified)
GPS AntennaYes
Remote Control No
Pioneer DMH-W3000NEX ManualPioneer DMH-W3000NEX Installation Manual
DIN or DDIN-Size Head-Unit Replacement Dash-Kit for Select 2014-2020 Dodge Durango Vehicles
ISO DIN radio provision with pocket
ISO DDIN radio provision
HVAC Interface and wiring harness included
Built-in ASWC-1 technology retains steering wheel controls
Painted black to match factory finish.
Touchscreen display for climate and personalization features
Wiring and Antenna Connections
Harness
Axxess interface built into touchscreen
Antenna Adapter
Included with kit
Steering wheel control interface
Included with kit
Applications
DODGE
Durango
2014-2020
Metra 99-6537B Installation Manual
