TW3-Series 10-Inch 400-Watt Automotive Subwoofer Driver, 4Ω or 8Ω DVC
The 10" TW3 thin subwoofer driver by JL Audio delivers a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than JL's W3v3 subwoofers!
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW3 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional 10-Inch thin subwoofer designs.
The 10TW3-D4 and 10TW3-D8 subwoofers are optimized for small enclosures and offer JL's tab-ear mounting design to maximize cone area within their mounting footprints.
Very shallow mounting depth (3.25 / 3.50 Inches)
No pole vent: permits mounting close to rear wall of enclosure.
Very small sealed enclosure volume requirements
Very long linear excursion capability (0.60 In / 15.2 mm, one-way)
DMA-optimized motor designs
“concentric tube” architecture
Patented “floating cone attach method” technology
Cast alloy frame
Injection molded, mica-filled polypropylene cone
Rubber surround
Aluminum-alloy dust cap and rear cap with JL Audio logo
Precision-built in USA at JL Audio’s Miramar, Florida factory with global components
General Specifications
Continuous Power Handling
400W RMS
Recommended Amplifier Power
200W - 400W RMS
Nominal Impedance
Dual 4Ω/8Ω
JL Audio 10TW3 Manual
10-Inch 300-Watt Subwoofer Driver, 2-Ohm or 4-Ohm SVC
The JL Audio 10" TW1 automotive thin subwoofer driver chassis offers a shallow mounting depth and excellent linear excursion capability while requiring a small enclosure (0.35 cu.ft. / 10 liters). The cast alloy frame design on the JL 10TW1 is capable of operating in very tight spaces like under-seat installations in trucks.
The 10TW1 design uses a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 10TW1 thin subwoofer also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Although the JL Audio 10TW1-2 and 10TW1-4 thin subwoofer drivers are optimized for an enclosure much smaller than most other 10 inch subwoofer drivers, they never sound like a big woofer struggling in a tiny box...instead, the 10TW1's delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
Very shallow mounting depth (4.36 in / 111 mm)
No pole vent: permits mounting close to rear wall of enclosure
Extremely small sealed enclosure volume requirements
Long linear excursion capability (0.40 in / 10 mm, one-way)
DMA-optimized motor design
Patented "concentric tube" architecture
Patented "floating cone attach method" technology
Cast alloy frame with flat edges for tight driver grouping
Injection molded, mica-filled polypropylene cone
Rubber surround
Steel mesh grille included with each driver
Precision-built in USA at JL Audio’s Miramar, Florida factory with global components
General Specifications
Continuous Power Handling
300W RMS
Recommended Amplifier Power
75W - 300W RMS
Nominal Impedance
2Ω/4Ω
JL Audio 10TW1 Manual
Head-Unit Replacement T-harness and Chime-Speaker for Select 2006-UP GM Vehicles
Radio replacement T-harness and chime speaker for select GM vehicles 2006 and up. Greatly simplifies the installation of the Maestro RR module sold separately.
Click Here to View Vehicle Coverage Information
Dual-Camera Channel Quick-Disconnect Add-On Trailer Wiring
2 camera connection – 1 audio and video 1 video only
32 foot extension to monitor
4-pin din connections for camera
6.5 ft trailer coil
1.5 ft dual camera cable
IP68
The TE-TCEX-1 gives the user the ability to add on two cameras for added visibilty to the sides, back, front, or even inside the trailer.
One camera connection even allows a provision for audio feed with a compatible camera. The thread-sealed water resistant connectors provide a safe and secure connection at the trailer hitch in all types of weather. Pair this universal trailer camera cable with any of our iBEAM commercial monitors and cameras.
Commercial RCA to 4-Pin Din Adapter Cable
Converts RCA to 4-Pin Din cable
Allows RCA camera to be used with commercial monitors
3.28 feet (1 meter) in length
Connect a 4-Pin Din camera to a RCA input monitor display for easy installation with iBeams Commercial RCA to 4-Pin Din Adapter Cable.
This adapter cable features a female 4-Pin Din connector on one end and a standard male RCA plug-in on the opposite end allowing RCA cameras to be used with a commercial monitor. Connects audio video and power for RCA cameras to your display. Generous 3.28 feet (1 meter) of cable length to accommodate larger vehicle applications.
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2014-2017 Chevy and GMC Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3 inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
Chrome finished handle
1/3in CMOS Camera
150 Degree Viewing Angle
Replaces the OEM tailgate handle
0.5 lux night vision
Defeatable parking lines
26 foot harness included
Applications
CHEVEROLET
Silverado 1500
2014-2017
Silverado 2500
2015-2017
Silverado 3500
2015-2017
Colorado
2015-2017
GMC
Sierra 1500
2014-2017
Sierra 2500
2015-2017
Sierra 3500
2015-2017
Canyon
2015-2017
iBeam TE-GMCH Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2015-2020 Ford F-150 Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3 inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
1/3in CMOS Camera
150 Degree Viewing Angle
Replaces the OEM tailgate handle
0.5 lux night vision
Defeatable parking lines
Applications
FORD
F-150
2015-2020
iBeam TE-FDH Manual
Tailgate-Handle Style Backup-Camera with Chrome-Finish for Select 2005-2016 Ford F-Series Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
Chrome finished handle
1/3in CMOS Camera
150 Degree Viewing Angle
Replaces the OEM tailgate handle
0.5 lux night vision
Defeatable parking lines
26 foot harness included
Applications
FORD
F-150, F-250, F-350, F-450
Excludes 2004 Heritage model
2005-2014
F-250, F-350, F-450, F-550
Superduty
2008-2016
iBeam TE-FCTGC Manual
Add-on or Replacement Tailgate-Handle Style Backup-Camera for Select 2009-2018 Ram Pickups
Add an unobtrusive rear-view backup camera that matches your vehicles factory tailgate with iBeams new replacement tailgate handle camera. A 150 degree viewing angle with 0.5 LUX night vision and defeatable parking lines offer added visibility for drivers to see what is behind them. A 1/3 inch CMOS camera provides a sharp clear picture during the day or night. A 26 foot harness is included to connect the camera to your aftermarket radio (radio not included) for video input.
Chrome finished handle
1/3in CMOS Camera
150 Degree Viewing Angle
Replaces the OEM tailgate handle
0.5 lux night vision
Defeatable parking lines
26 foot harness included
Applications
DODGE
RAM 1500
2009-2011
RAM 2500
2010-2011
RAM
1500
2012-2018
2500
2012-2018
iBeam TE-DGHC Manual
7-Inch Video-Monitor with 4-Channel Camera-Inputs
7 inch color LCD screen
Display 1 to 4 cameras simultaneously
Multiple display layouts
4-Pin DIN camera input connectors
Compatible with TE-WTR wireless camera kit
Includes remote control
Built-in speaker for audio from camera
View up to four camera feeds simultaneously with this 7 inch color LCD monitor.
Our iBeam 7 inch color monitor provides the most complete view of every angle surrounding your vehicle. Choose from multiple display layouts to find the personalized display option that is best for you. Compatible with TE-WTR wireless camera kit and offering connection for four of our 4-Pin DIN heavy duty cameras this monitor is truly cutting edge safety equipment. Includes convenient remote control for toggling between camera displays. An ideal solution for RVs and commercial vans trucks or larger vehicles that have more blind spots.
iBeam TE-7VS-4 Manual
OEM OBDII T-Harness Wiring Adapter
OBDII T-harness
All wires pinned
For use with additional accessories that require to be plugged into the OBDII plug but still provides a factory mounted plug for vehicle maintenance.
To be used with vehicles where the OBDII plug is a push-in mount, NOT screw mounted
Alpine 350-Watt Thin 10-Inch Subwoofer Driver, 2Ω or 4Ω Impedance
The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing big output to build the ideal sound system for your truck. At 4-1/8” deep, these subs provide deep bass performance where it normally couldn’t fit in a truck. And the vented pole optimized for 4-1/8” deep box is the ideal enclosure size meaning great bass performance can fit just about anywhere in your truck.
The FEA-Optimized Motor Structure together with Alpine's revolutionary High-Amplitude Multi Roll (HAMR) Suspension Design gives the new SWT Truck Subwoofers the highest X-max and SPL output in its category.
The new SWT Truck Subwoofers deliver the best-in-class bass output, ultra-low distortion, and unparalleled sound quality. With a real world, measured 11mm of X-max, the SWT subwoofers perform like traditional models, yet fit in smaller spaces.
4 UNIQUE ALPINE TECHNOLOGIES
Radial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system.
FEA Optimized Dual-Sided Machined CRC Motor StructureCreates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output.
FEA Optimized Injection Molded TPE Spider with Pass-Through Gap DesignProvides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package
FEA Optimized HAMR SurroundThe High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.
Specifications
350W RMS, 1000W Peak Power Handling
Frequency Response: 30Hz-200Hz
Mounting Depth 4-3/16"
2Ω or 4Ω Voice Coil
Alpine 75-Watt 2-Way Component Speaker-System for 2007-2018 Jeep Wrangler-JK
These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.
The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.
Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.
Specifications
6.5” Component or Coaxial 2-Way Speaker System w/ Convertible Design
Weather Resistant (IP55 rating)
Power Handling: 75W RMS/225W Peak
Nominal Impedance 4Ω
Frequency Response: 65-22kHz
1” Teteron Dome Tweeter
CustomSteel Frame w/ factory speaker mounting tabs
OEM speaker connectors
Alpine 350-Watt Loaded 10-Inch Subwoofer-Enclosure for 2007-2018 Jeep-Wrangler JK-Unlimited, 2Ω Final Impedance
When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger’s seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet)
Enjoy impactful bass, with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends.
Specifications
10” Pre-loaded Sealed Custom-fit Enclosure
Weather Resistant (IP66 rating)
Power Handling: 350WRMS/1050W Peak
Nominal Impedance 2Ω
Frequency Response: 45-200Hz
OEM-grade Molex 2-pin connector w/pigtail wire harness
Alpine SBV-10-WRA Manual
Alpine 350-Watt 10-Inch Truck Subwoofer Enclosure, 2Ω Final Impedance
With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. Radial Vented VC Heat Sink & Airflow Management System actively manages voice coil temperatures by forcing air directly across the heat sink system.
FEA Optimized Dual-Sided Machined CRC Motor Structure creates a symmetrical magnetic field with evenly distributed flux density to greatly reduce distortion, while further improving power handling and output. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.
Specifications
2Ω Impedance
Ported Enclosure Design
Frequency Response: 28Hz-200Hz
Dimensions 21-5/8" Wide x 15-1/4" Tall x 7-1/4" Deep 1x 3-15/16"
Alpine SBT-S10V Manual
Alpine S-Series 300-Watt 8-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications.
Specifications
8" DVC High Performance Subwoofer
Power Handling: 300W RMS/900W Peak
Push-type Insert Terminals with DVC jumper system
Concealed Mount Gasket/Grille* System(*Grille sold separately)
Frequency Response: 34Hz-200Hz
Mounting Depth 3-3/4”
Alpine S-W8D2, S-W8D4 Manual
Alpine S-Series 600-Watt 12-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
Specifications
Power Handling: 600W RMS/1800W Peak @ 2Ω
Push-type Insert
Terminals with DVC jumper system
Concealed Mount Gasket/Grille* System (*Grille sold separately)
Frequency Response: 26Hz-200Hz
Mounting Depth 5-1/16”
Alpine S-W12D2, S-W12D4 Manual
Alpine S-Series 600-Watt 10-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
Specifications
10" DVC High Performance Subwoofer
Power Handling: 600W RMS/1800W Peak
Push-type Insert Terminals with DVC jumper system
Concealed Mount Gasket/Grille* System (*Grille sold separately)
Frequency Response: 28Hz-200Hz
Mounting Depth 4-11/16”
Alpine S-W10D2, S-W10D4 Manual
Alpine 5X7-Inch Coaxial 2-Way Speakers, 75-Watt RMS
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.
Specifications
75W RMS/230W Peak
Nominal Impedance 4Ω
Frequency Response: 73-22kHz
1” Silk Dome Tweeter
CFRP (Carbon Fiber Reinforced Plastic) Cone
H.A.M.R. Surround
CustomStamped Steel Frame
30mm voice coil
Alpine 5-1/4" Coaxial 2-Way Speakers, 55-Watts RMS
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.
Specifications
55W RMS/170W Peak
Nominal Impedance 4Ω
Frequency Response: 80-22kHz
1” Silk Dome Tweeter
CFRP (Carbon Fiber Reinforced Plastic) Cone
H.A.M.R. Surround
CustomStamped Steel Frame
25mm voice coil
Optional grille sold separately (KTE-S50G)
Alpine 4-Inch Coaxial 2-Way Speakers, 45-Watts RMS
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.
Specifications
45W RMS/140W Peak
Nominal Impedance 4Ω
Frequency Response: 97-22kHz
3/4” Silk Dome Tweeter
CFRP (Carbon Fiber Reinforced Plastic) Cone
H.A.M.R. Surround
Custom Stamped Steel Frame
25mm voice coil
Alpine Mono Subwoofer Amplifier, 600-Watts @ 2-Ohm or 330-Watts @ 4-Ohm Impedance
The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside. At 600 watts RMS, the S-A60M is a powerful partner to drive the versatile S-Series subwoofers.
The S-Series amplifiers contain technology that was previously only available in our premium line up of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you.
Specifications
330W RMS x 1 (4Ω, 14.4V, ≤ 1% THD+N)
600W RMS x 1(2Ω, 14.4V, ≤ 1% THD+N)
S/N >85dB (ref. 1W into 4Ω)
THD+N ≤ 0.03% (ref. 1W into 4Ω)
Frequency response =10Hz to 400Hz (+/-3dB)
Damping Factor: >1000
Alpine S-A60M Manual
Alpine S-Series 40-Watt x 4-Channel Power Amplifier with 300-Watt Sub Channel @ 2Ω
The S-Series amplifiers are designed to fit anywhere. The S-A55V 5-Channel model measures at 11.25” W x 8” H x 2.25” D and can be mounted under seats or behind panels. It proves to be the all-in-one solution for a multi-amp system, so you can enjoy big power output in a limited installation space.
The S-Series amplifiers contain technology that was previously only available in our premium line up of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you.
Specifications
Alpine's Class D amplifier circuit
40W RMS x 4 +200W RMS x 1(4Ω, 14.4V, ≤ 1% THD+N)
60W RMS x 4 +300W RMS x 1(2Ω, 14.4V, ≤ 1% THD+N)
Bridged: 120W RMS x 2 (4Ω, 14.4V, ≤ 1% THD+N)
S/N >83dB (ref. 1W into 4Ω)
THD+N ≤ 0.03% (ref. 1W into 4Ω)
Frequency response =10Hz to 30kHz (+/-3dB)
Damping Factor: CH 1/2/3/4 >100, CH 5 >750
Alpine S-A55V Manual
Alpine S-Series 55-Watt x 4-Channel Power Amplifier
The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside The S-A32F 4-Channel Amplifier boasts the perfect amount of power to drive the newly redesigned S-Series speakers to their optimal performance for clean and accurate sound.
The S-Series amplifiers contain technology that was previously only available in our premium line up of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you.
Specifications
Alpine's Class D amplifier circuit
55W RMS x 4 (4Ω, 14.4V, ≤ 1% THD+N)
80W RMS x 4 (2Ω, 14.4V, ≤ 1% THD+N)
Bridged: 160W RMS x 2 (4Ω, 14.4V, ≤ 1% THD+N)
S/N >83dB (ref. 1W into 4Ω)
THD+N ≤ 0.03% (ref. 1W into 4Ω)
Frequency response =10Hz to 30kHz (+/-3dB)
Damping Factor >100
Alpine S-A32F Manual
Alpine 8-Inch 120-Watt Compact Powered Subwoofer-System for 2011-UP 4-Door Jeep-Wrangler Unlimited
The small, but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watt amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space.
Subwoofer controls like Phase, Gain, LP Crossover and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to easily make bass level adjustments.
Specifications
120 Watts bass upgrade for 2011-UP 4-door Jeep Wrangler*
Under driver seat plug & play system for improved bass/mid-bass performance
Works with an Alpine or aftermarket head unit, or with the factory Jeep radio
Includes powered 8" subwoofer, remote bass knob, harnesses and mounting brackets
Not compatible with the factory equipped subwoofer system
Alpine PWE-S8-WRA Manual
The compact PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle.
With the PWE-S8, the high-excursion 8-inch subwoofer and 120W gives strong bass output.
Specifications
RCA and speaker level inputs
120 Watt amp
Frequency Response: 25Hz-152Hz
Dimensions 13- 7/16" Wide x 9-1/16" Long x 2-13/16" Deep
Alpine PWE-S8 Manual
The PWD-X5’s subwoofer increases the sound system’s overall bass output and when the product is installed under the front seat, it brings the sound stage forward in the vehicle for the best bass and imaging experience. With 165-watts available to the subwoofer and 25-watts x 4 to the speakers, this all-in-one solution lets you create a truly enjoyable and customizable sound experience in just about any in-vehicle cabin space.
The PWD-X5 can also be used in non-traditional ways thanks to the Bluetooth® streaming capabilities. In situations where the car radio cannot be replaced, such as in a classic car, music can be streamed to the PWD-X5’s Bluetooth® connection then played through the car’s speakers while utilizing the PWD-X5’s bass and amplified power. If a head unit does not exist, such as on a motorcycle or a side-by-side, the music streamed from a smartphone to the PWD-X5’s Bluetooth® connection is used as the vehicle’s music source.
Specifications
25W x 4 +165W RMS
50W x 4 +240W Peak
4 RCA/Speaker Level Inputs
10-Band Parametric EQ
Digital Time Correction
Bluetooth Signal Inputs
Remote Commander Included
OS/Android and Desktop PC Tuning Software
13-13/16” x 9-11/16” x 3-3/16”
CES 2019 Innovations Award Winner
Alpine PWD-X5 Manual
Alpine 300-Watt Powered Speaker-System Upgrade with Built-in Subwoofer for Select 2018-2022 Jeep-Wrangler and Gladiator-JT Vehicles
Enjoy premium sound quality even with your JL’s top off! The PSS-23WRA is a 300 watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler-Unlimited-JL and Gladiator-JT vehicles without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.
The PWE-S8 subwoofer is engineered to load and disperse lower frequency sound into the passenger’s foot well area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off.
The PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy, bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.
The SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high performance tweeters add much needed high frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios.
Specifications
Direct fit for non-amplified 2018–Up 4-door Jeep Wrangler JL Unlimited
Direct fit for non-amplified 2019–Up 2-door Jeep Wrangler
Direct fit for non-amplified 2020–Up Jeep Gladiator JT
300 Watts RMS
Plug & Play Sound System
Compatible with aftermarket radio, or with factory Jeep Radio
Includes remote bass knob, vehicle specific harnesses and mounting bracket
Alpine PSS-23WRA Manual
A premium sound system for your Jeep Wrangler JK Unlimited is. The PSS-22WRA is a 1200-watt, 9-speaker sound system for 2011-2018 Jeep Wrangler JK Unlimited, providing excellent sound performance with the top on or off.
Caught with the top off in inclement weather? Not to worry. The PSS-22WRA is IP55 rated, so it can withstand rain and dust. The subwoofer uses rust resistant hardware and can handle water from off-roading adventures or a quick rinse down.
The PSS-22WRA’s subwoofer and amplifier don’t take up any usable space since they mount under the passenger’s seat for an easy bolt-in installation with simple wire routing. All necessary installation accessories are included.
The included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-22WRA is compatible with any Alpine Restyle Jeep Wrangler dash system, the Jeep factory base radio, or other aftermarket radio.
Specifications
Direct fit weather resistant (IP55) speaker package for non-amplified 2011– 2018 4-door Jeep® Wrangler JK Unlimited
600W RMS System
SPV-65X-WRA 6.5-inch Convertible Component/Coax water resistant speaker kit
SBV-10-WRA 10-inch under passenger seat water resistant enclosed subwoofer
KTA-30FW – 75W X 4ch Water Resistant Amplifier
KTA-30MW – 300W Water Resistant Mono Amplifier
Plug & play sound system
Compatible with an Alpine Restyle In-Dash system, aftermarket head unit, or with the factory Jeep radio
Includes remote bass knob, vehicle specific harnesses and mounting brackets
Alpine PSS-22WRA Manual
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycles saddlebags.
The KTA-30MW is ready for your adventures. It is weather resistant, rated at IP66 for protection again dust ingress and high-pressure water spray. Its rugged chassis and high-quality waterproof connector can be used in installations where it will be exposed to the outdoor elements.
Specifications
Alpine's Class D amplifier circuit with Dynamic Peak Power (DPP)
300W RMS x 1@ 2Ω, 14.4V, ≤ 1% THD+N
600W DPP x 1@ 2Ω, 14.4V, ≤1% THD+N
>83dB S/N (ref. 1W into 4Ω)
0.1% THD (ref 1W into 4Ω)
20-400Hz Frequency response (+/-1dB)
Cast Aluminum chassis
Weather resistant (IP66 rating) OEM-grade connector wire harness
Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:LP filter – Off/LP, Fc=50-400Hz @ -24dB/Oct. (variable); Subsonic filter: Fc=5-40Hz (variable); Input gain settings (variable); Bass EQ: 0 to +12dB, Fc=50Hz (variable)
No Manual Available
The KTA-F30W is perfect for when you want to boost your sound system but don’t have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
The KTA-30FW features Alpine’s exclusive Dynamic Peak Power (DPP) technology which uses a new dynamic power supply design that delivers bursts of power during rigorous musical passages. When the amplifier senses that more power is required, the power supply quickly increases the internal gain level, effectively doubling the power for a significant increase in dynamic range at high music volumes.
Specifications
Alpine's Class D amplifier circuit w/ Dynamic Peak Power (DPP)
75W RMS x 4 @ 2Ω/4Ω, 14.4V, ≤ 1% THD+N
150W DPP x 4 @ 2Ω/4Ω, 14.4V, ≤ 1% THD+N
>85dB S/N (ref. 1W into 4Ω)
>0.1% THD (ref. 1W into 4Ω)
20-20kHz Frequency response (+/-1dB)
Weather resistant (IP66 rating) OEM-grade connector wire harness
Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control: Crossovers – Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable); Input gain settings (variable); 2ch/4ch input (selectable)
Alpine KTA-30FW Manual
Front and Rear Camera with view mode selection by external control button (included)
2 Direct Inputs for front and rear cameras
1 RCA Input for other cameras (Exclusive with Direct Input Rear Camera)
Universal RCA Output for other display devices
Compatible with all Alpine direct and universal cameras (sold separately)
Easily control your single view camera or Alpine direct multi-view cameras with the KCX-C2600B Front and Rear Camera Switcher.
Use the two-button controller to choose the desired camera and toggle through the various viewing modes from the camera (when connected to a multi-view camera). The controller can be mounted on your dashboard for easy access.
The KCX-C2600B features two direct inputs for the front and rear cameras, and one RCA input for a non-Alpine rear camera. It also has one universal RCA output for other display devices such as a factory screen (third party factory camera interface required).
Alpine KCX-C2600B Manual
Allows up to 3 cameras to be added to Alpine Head Units like the X209 series, i209-WRA, INE-W977HD and iLX-2077 3M direct camera input cable included
No Manual Available
Does your vehicle have electrical controls such as a winch, lights, air suspension, automatic trunk, motorized tonneau cover, etc? No need to add switches that clutter your dash anymore. Now you can conveniently control these accessories directly from your Alpine Dash System* touchscreen!
The KAC-001 Accessory Controller turns your Alpine Dash System* into a hub to connect and control these accessories. This module includes eight individual outputs are available to control eight relay-connected 12V accessories, and the accessories can be configured as Pulsed, Latched or Momentary Outputs. Graphical icons can be assigned to each accessory for quick identification on the screen.
Specifications
(8) 250mA (-) accessory outputs
Pulsed, latched, or momentary output selection
Compatible with Alpine Head Units like the X209 series, i209 series, i207-WRA, iLX-107, iLX-207, iLX-F309, X110-SLV, X110-SRA, X109D, X108U, INE-W967HD
Alpine KAC-001 Manual
The ALP-HRN-CAMCH is a Wrangler JK specific custom wiring harness and is just the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership.
Alpine ALP-HRN-CAMCH Manual
