Dual 4Ω

Automotive Speakers and Subwoofers with Dual 4-Ohm Voice Coils

Automotive Speakers and Subwoofers with Dual 4-Ohm Voice Coils

46 products

  • Alpine R2-W10D : 750W 10" Subwoofer Driver, Dual Voice Coil Alpine R2-W10D : 750W 10" Subwoofer Driver, top side.

    Alpine R2-W10D : 750W 10" Subwoofer Driver, Dual Voice Coil

    Pre-Order Today!

    R-Series 10-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W10D2 and R2-W10D4 is compatible with the KTE-10G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap  Kevlar Reinforced Pulp Cone High-Performance subwoofers   Twist-Lock Grille Mount System  High-Amplitude Multi-Roll (H.A.M.R.) Surround  Large Double-Stacked Magnets Specifications 750W RMS  2250W Peak Power Handling  Frequency Response: 26Hz-200Hz  Sensitivity (1W/1m): 82.4dB   Nominal Impedance: 4Ω Voice Coil: 65mm   X-Max: 20mm Magnet Weight: 123oz  Mounting Depth: 6” (152mm) Cutout Size: 9-1/16” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant  Alpine R2-W10D Manual

    Pre-Order Today!

    $329.99

  • Alpine R2-W12D : 750W 12" Subwoofer Driver, Dual Voice Coil Alpine R2-W12D : 750W 12" Subwoofer Driver, front view.

    Alpine R2-W12D : 750W 12" Subwoofer Driver, Dual Voice Coil

    Pre-Order Today!

    R-Series 12-Inch 750-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W12D2 and R2-W12D4 is compatible with the KTE-12G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap  Kevlar Reinforced Pulp Cone High-Performance subwoofers   Twist-Lock Grille Mount System  High-Amplitude Multi-Roll (H.A.M.R.) Surround  Large Double-Stacked Magnets Specifications 750W RMS  2250W Peak Power Handling  Frequency Response: 24Hz-200Hz  Sensitivity (1W/1m): 84.5dB   Nominal Impedance: 4Ω Voice Coil: 65mm   X-Max: 20mm Magnet Weight: 144oz  Mounting Depth: 6-1/2” (152mm) Cutout Size: 10-7/8” (231mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant  Alpine R2-W12D Manual

    Pre-Order Today!

    $379.99

  • Alpine R2-W8D : 350W 8" Subwoofer Driver, Dual Voice Coil Alpine R2-W8D : 350W 8" Subwoofer Driver, top view.

    Alpine R2-W8D : 350W 8" Subwoofer Driver, Dual Voice Coil

    Pre-Order Today!

    R-Series 8-Inch 350-Watt Subwoofer Driver, 2-Ohm or 4-Ohm Dual Voice Coil Since the Type R platform, Alpine’s R-Series sound system family has been known for its incredible output and reliable performance. Now Alpine introduces the next-generation of sound performance with the 2nd-Gen R-Series Subwoofers with even more bass output. The 2nd-Gen R-Series Subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control from the subwoofer cone compared to the previous generation. An integrated Faraday ring minimizes distortion for cleaner bass output. A Kevlar-treated cone ensures durability in the subwoofer for reliable performance, even at high volumes. A new polypropylene/ceramic composite dust cap ensures rigidity while also providing incredible internal damping (vibration absorption) to smooth out the bass response and reproduce tight bass. This premium, unique material also has higher heat reliability that ensures non- stop bass performance. The 2nd-Gen R-Series Subwoofers contain a Dual Voice Coil (DVC) with easy configuration jumpers that allow for flexible applications. A new “EZ- Change” twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone. The R2-W8D2 and R2-W8D4 is compatible with the KTE-8G Grille System (sold separately). The 2nd-Gen R-Series Subwoofers contain Alpine’s High Amplitude Multi- Roll (HAMR) Surround Technology. This rubber surround allows the subwoofer cone to efficiently move air while staying cool. This technology allows for 20mm of total cone excursion and motion that creates incredible accuracy from the subwoofer. Features Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers Polypropylene/Ceramic Composite Dust Cap  Kevlar Reinforced Pulp Cone High-Performance subwoofers   Twist-Lock Grille Mount System  High-Amplitude Multi-Roll (H.A.M.R.) Surround  Large Double-Stacked Magnets Specifications 350W RMS  1000W Peak Power Handling  Frequency Response: 30Hz-200Hz  Sensitivity (1W/1m): 83.5dB   Nominal Impedance: 4Ω Voice Coil: 35mm  X-Max: 12mm Magnet Weight: 56oz  Mounting Depth: 4-3/8” (118mm) Cutout Size: 6-15/16” (176mm) Push-Type Speaker Terminals (Up to 8AWG Wire Size) CTA-2031 Compliant  Alpine R2-W8D Manual

    Pre-Order Today!

    $249.99

  • Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Alpine S-W10D : 10" 600W Subwoofer Driver, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 600-Watt 10-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications 10" DVC High Performance Subwoofer Power Handling: 600W RMS/1800W Peak Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 28Hz-200Hz Mounting Depth 4-11/16” Alpine S-W10D2, S-W10D4 Manual

    Pre-Order Today!

    $179.99

  • Alpine S-W12D : 12" 600W Subwoofer, 2Ω or 4Ω DVC

    Alpine S-W12D : 12" 600W Subwoofer, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 600-Watt 12-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. Specifications Power Handling: 600W RMS/1800W Peak @ 2Ω Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System (*Grille sold separately) Frequency Response: 26Hz-200Hz Mounting Depth 5-1/16” Alpine S-W12D2, S-W12D4 Manual

    Pre-Order Today!

    $199.99

  • Alpine S-W8D : 8" 300W Subwoofer, 2Ω or 4Ω DVC

    Alpine S-W8D : 8" 300W Subwoofer, 2Ω or 4Ω DVC

    Pre-Order Today!

    Alpine S-Series 300-Watt 8-Inch Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications. Specifications 8" DVC High Performance Subwoofer Power Handling: 300W RMS/900W Peak Push-type Insert Terminals with DVC jumper system Concealed Mount Gasket/Grille* System(*Grille sold separately) Frequency Response: 34Hz-200Hz Mounting Depth 3-3/4” Alpine S-W8D2, S-W8D4 Manual

    Pre-Order Today!

    $159.99

  • JL Audio 10TW3 : 400W 10" Thin Subwoofer Driver, 4Ω or 8Ω Dual Voice Coil JL Audio 10TW3 : 400W 10" Thin Subwoofer Driver, 4Ω or 8Ω Dual Voice Coil, top side.

    JL Audio 10TW3 : 400W 10" Thin Subwoofer Driver, 4Ω or 8Ω Dual Voice Coil

    Pre-Order Today!

    TW3-Series 10-Inch 400-Watt Automotive Subwoofer Driver, 4Ω or 8Ω DVC  The 10" TW3 thin subwoofer driver by JL Audio delivers a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than JL's W3v3 subwoofers! JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW3 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional 10-Inch thin subwoofer designs. The 10TW3-D4 and 10TW3-D8 subwoofers are optimized for small enclosures and offer JL's tab-ear mounting design to maximize cone area within their mounting footprints. Very shallow mounting depth (3.25 / 3.50 Inches) No pole vent: permits mounting close to rear wall of enclosure. Very small sealed enclosure volume requirements Very long linear excursion capability (0.60 In / 15.2 mm, one-way) DMA-optimized motor designs “concentric tube” architecture Patented “floating cone attach method” technology Cast alloy frame Injection molded, mica-filled polypropylene cone Rubber surround Aluminum-alloy dust cap and rear cap with JL Audio logo Precision-built in USA at JL Audio’s Miramar, Florida factory with global components General Specifications Continuous Power Handling 400W RMS Recommended Amplifier Power 200W - 400W RMS Nominal Impedance Dual 4Ω/8Ω JL Audio 10TW3 Manual

    Pre-Order Today!

    $449.99

  • 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil : JL Audio 10W6v3, shown with grille. JL Audio 10W6v3 : 10-inch 600-Watt Subwoofer Driver, 4-Ohm DVC

    JL Audio 10W6v3 : 600W 10" Subwoofer Driver, 4Ω Dual Voice Coil

    Pre-Order Today!

    W6-Series 10-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 10W6v3 subwoofer driver offers several technologies similar to JL Audio's W7AE top line of subwoofers to provide powerful advantages in motor linearity and suspension behavior. This 10" automotive sub has a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. This 10" W6v3 driver is best used with an amplifier in the 200W - 600W RMS range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. The JL Audio 10W6V3-D4 subwoofer driver comes with Dual 4Ω voice coils that allow the 10W6v3 to be installed in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200 - 600W RMS Nominal Impedance Dual 4Ω JL Audio 10W6v3 Manual

    Pre-Order Today!

    $799.99

  • JL Audio 12TW3 : 12-Inch 400-Watt Thin Subwoofer Driver, 4-Ohm or 8-Ohm DVC, front side view. 400W 12" Thin Subwoofer Driver, 4Ω or 8Ω Dual Voice Coil : JL Audio 12TW3

    JL Audio 12TW3 : 400W 12" Thin Subwoofer Driver, 4Ω or 8Ω Dual Voice Coil

    Pre-Order Today!

    TW3-Series 12-Inch 400-Watt Thin Subwoofer Driver, 4-Ohm or 8-Ohm DVC The 12" TW3 thin subwoofer driver by JL Audio offers a shallow mounting depth with an excursion capability that is remarkably capable of greater excursion than JL's W3v3 full size subwoofers. JL Audio’s TW3 sub utilizes a patented thin-line woofer technology that compresses the architecture of the 12TW3 woofer using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and spider, while allowing the placement of the large motor structure to be moved further forward on the chassis than with conventional designs. JL Audio 12TW3-D4 and 12TW4-D8 are optimized for small enclosures and offers JL's tab-ear mounting design to maximize cone area within their mounting footprints. Deep, powerful and accurate JL Audio bass is now possible in more applications than ever. Very shallow mounting depth (3.25 / 3.50 Inches) No pole vent: permits mounting close to rear wall of enclosure. Very small sealed enclosure volume requirements Very long linear excursion capability (0.60 In / 15.2 mm, one-way) DMA-optimized motor designs “concentric tube” architecture Patented “floating cone attach method” technology Cast alloy frame Injection molded, mica-filled polypropylene cone Rubber surround Aluminum-alloy dust cap and rear cap with JL Audio logo Precision-built in USA at JL Audio’s Miramar, Florida factory with global components General Specifications Continuous Power Handling 400W RMS Recommended Amplifier Power 200W - 400W RMS Nominal Impedance Dual 4Ω/8Ω JL Audio 12TW3 Manual

    Pre-Order Today!

    $499.99

  • JL Audio 12W6v3 : 12-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC 600W 12" Subwoofer Driver, 4Ω Dual Voice Coil : JL Audio 12W6v3, top side view.

    JL Audio 12W6v3 : 600W 12" Subwoofer Driver, 4Ω Dual Voice Coil

    Pre-Order Today!

    W6-Series 12-Inch 600-Watt Subwoofer Driver, 4-Ohm DVC The 12" W6v3 subwoofer driver is an audiophile subwoofer that offers powerful advantages in motor linearity and suspension behavior. The 12W6v3 sub offers a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The JL 12W6v3-4 automotive sub is best used with an amplifier in the 200-Watt - 600-Watt RMS range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Greater excursion capability and higher power handling distinguish the 12" JL W6v3 subwoofer from the 12W3v3 12-inch subwoofer driver, allowing for higher output. Dual 4Ω voice coils allow the W6v3 to be wired in a 2Ω or 8Ω configuration. General Specifications Continuous Power Handling 600W RMS Recommended Amplifier Power 200W - 600W RMS Nominal Impedance Dual 4Ω JL Audio 12W6v3 Manual

    Pre-Order Today!

    $899.99

  • 750W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 41L710 750W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil : Kicker 41L710, rear view.

    Kicker 41L710 : 750W 10" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    10-Inch 750-Watt Square Subwoofer, 2-Ohm or 4-Ohm DVC The 10" L7 series automotive subwoofer driver by Kicker stands alone as the most unique subwoofer on the market, with a cone shape that is exclusively designed to produce more output. The Kicker 41L7102 and the 41L7104 subwoofers again reach new heights in technology and design. A 2015 CES® Innovation Award winner, Kicker L7 branded itself as the crown jewel among competition subwoofers. For more than a decade, Kicker’s square woofer earned numerous awards including several CES accolades, and the 2015 version once again makes distinctive improvements on its way to another honor. These 10-Inch L7 square subwoofers deliver 20% more surface area than a comparable circular 10" sub. A bigger cone means more air gets dispersed for each excursion cycle thus producing more sound! Kicker included oversized magnets and an aluminum voice coil, to help keep heat to a minimum. The Uniplate™ is a KICKER original design, combining the pole piece and back plate as a single, seamless unit to pull damaging heat away from the sub. Kicker's patented Santoprene™ corners allow your KICKER subs to play smooth, distortion-free music at any volume level. Kicker's Blue Lace™ spider and ribbed surround work together to give you the best suspension for your L7. You get unparalleled accuracy and volume to feel every note - every time. Specifications Rated Impedance [Ω] 2 or 4 DVC Fs [Hz] 37.5 Sensitivity [1W, 1m] 85.9 Qts 0.507 Qms 9.791 Qes 0.535 Re [Ω] 7.9 Vas [ft³, L] 1, 28.32 Recommended Amplifier Power (watts RMS) 750 Outer Frame Dimension [in, cm] 10 11/16, 27.2 Mounting Depth [in, cm] 6 7/8, 17.5 Mounting Cutout [in, cm] 9 5/16, 23.7 Frequency Response [Hz] 24 - 100 Minimum Sealed Volume ft3 (L) .8 (22.65) Maximum Sealed Volume ft3 (L) 1.25 (35.4) Kicker L7 Subwoofer Manual

    Pre-Order Today!

    $299.99

  • Kicker 41L712 : 12-Inch 900-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC Kicker 41L712 : 12-Inch 900-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC, side view.

    Kicker 41L712 : 900W 12" Square Subwoofer Driver, 2Ω or 4Ω Dual Voice Coil

    Pre-Order Today!

    12-Inch 900-Watt Square Subwoofer Driver, 2-Ohm or 4-Ohm DVC The 12" L7 square subwoofer driver by Kicker stands alone as the most unique subwoofer on the market, with a cone shape that is exclusively designed to produce more output. The Kicker 41L712 and 41L714 subwoofers again reaches new heights in technology and design. A winner of the 2015 CES® Innovation Award, the Kicker L7 series solidified itself as the crown jewel among competition subwoofers. For more than a decade, Kicker’s square woofer design has earned numerous awards including several CES accolades, and the 2015 version once again makes distinctive improvements on its way to another honor. A KICKER® original design, their square subwoofers deliver 20% more surface area than a comparable circular sub. A larger cone area disperses more air for each excursion thus producing more sound! Oversized magnets and an aluminum voice coil ensures maximum output while remaining cool. The Uniplate™ is a Kicker original design, combining the pole piece and back plate as a single, seamless unit to pull damaging heat away from the sub. Kicker's patented Santoprene™ corners allow the Kicker 12-Inch L7 series subs to play smooth, distortion-free music at any volume level. Kicker's Blue Lace™ spider and ribbed surround work together to give you the best suspension for your L7. You get unparalleled accuracy and volume to feel every note - every time. Specifications Rated Impedance [Ω] 2 or 4 DVC Fs [Hz] 34 Sensitivity [1W, 1m] 86.9 Qts 0.539 Qms 9.488 Qes 0.571 Re [Ω] 6.8 Vas [ft³, L] 1.92, 54.274 Recommended Amplifier Power (watts RMS) 900 Outer Frame Dimension [in, cm] 12 9/16, 32 Mounting Depth [in, cm] 7 7/8, 20 Mounting Cutout [in, cm] 11 1/16, 28.1 Frequency Response [Hz] 20 - 100 Kicker L7 Subwoofer Manual

    Pre-Order Today!

    $349.99


You have seen 12 out of 46 products

Login

Forgot your password?

Don't have an account yet?
Create account