All

  Add-On ANC Integration Wiring-Harness for Select 2015-2019 Chrysler, Dodge, Jeep and RAM Vehicles Many late model Chrysler, Jeep, and RAM vehicles are equipped with an Active Noise Canceling (ANC) module. When adding aftermarket amplifiers in these vehicles, this factory ANC module must be bypassed for proper operation of the aftermarket audio equipment and avoid possible damage to the ANC module. The PAC ANC-CH01 provides a plug-and-play solution for bypassing the ANC module in these vehicles, eliminating the need to cut factory wiring. Quickly and easily bypass the ANC Module. Keeps ANC module on data-bus for vehicle diagnostics health Factory fit plug-in connectors Prevents cutting of factory wires Applications - confirmed as of 2/1/2023 Year(s) Make Model Trim Level Additional Info 2017-2019 CHRYSLER PACIFICA ALL TRIM LEVELS — 2019 DODGE RAM TRUCK NON-CLASSIC — 2019 JEEP CHEROKEE ALL TRIM LEVELS — 2015-2016 JEEP GRAND CHEROKEE ALL TRIM LEVELS — 2019 RAM RAM TRUCK NON-CLASSIC — Pac Audio ANC-CH01 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2018 Amplified Chrysler, Dodge, Jeep and RAM Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation It prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it, thanks to the original amplifier's retention. Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER TOWN & COUNTRY ALL TRIM LEVELS 2008-2016 DODGE CHALLENGER ALL TRIM LEVELS 2008-2014 CHARGER ALL TRIM LEVELS 2008-2010 DURANGO ALL TRIM LEVELS 2009, 2011-2013 GRAND CARAVAN ALL TRIM LEVELS 2008-2018 RAM TRUCK ALL TRIM LEVELS 2009-2012 JEEP GRAND CHEROKEE ALL TRIM LEVELS 2008-2013 WRANGLER ALL TRIM LEVELS 2007-2017 WRANGLER JK 2018 WRANGLER UNLIMITED ALL TRIM LEVELS 2007-2017 WRANGLER UNLIMITED JK 2018 RAM RAM TRUCK ALL TRIM LEVELS 2010-2012 Pac Audio AP4-CH21 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2011-2016 Amplified Chrysler, Dodge and Maserati Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 22-pin harness (Dual MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats, or Harman Kardon. Vehicle manufacturers do not always brand compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. CHRYSLER 300 ALL TRIM LEVELS 2011-2014 DODGE CHARGER ALL TRIM LEVELS 2011-2014 JOURNEY ALL TRIM LEVELS 2011-2015 MASERATI GHIBLI ALL TRIM LEVELS 2015 QUATTROPORTE ALL TRIM LEVELS 2014-2016 Pac Audio AP4-CH31 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2013-UP Chrysler, Dodge, Jeep, Maserati and RAM Vehicles This latest version of the Pac-Audio AmpPRO simplifies the installation of upgraded amplifiers in select non-amplified and amplified sound systems  With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifier Enables the addition of a subwoofer to an amplified sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately)  Includes AmpPRO module 52-pin harness (MS-CAN) Bass knob with harness Manual Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Compatible with both amplified and non-amplified factory systems. Jeep Cherokee, Chrysler 200, and Maserati: These vehicles must be equipped with a factory amplifier as the AP4 cannot reprogram the factory radio to think that an amplifier is present. When installing into any of the following vehicles, the APHCH42 is required (sold separately): CHRYSLER 200 ALL TRIM LEVELS 2015-2017 300 ALL TRIM LEVELS 2015-2022 PACIFICA ALL TRIM LEVELS 2017-2022 DODGE CHALLENGER ALL TRIM LEVELS 2015-2022 CHARGER ALL TRIM LEVELS 2015-2022 DURANGO ALL TRIM LEVELS 2014-2020 DURANGO ALL TRIM LEVELS w/10.1" Screen 2021 DURANGO ALL TRIM LEVELS w/8.4" Screen 2021 RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 JEEP CHEROKEE ALL TRIM LEVELS 2015-2021 GLADIATOR ALL TRIM LEVELS 2020-2022 GRAND CHEROKEE ALL TRIM LEVELS 2014-2020 GRAND CHEROKEE WK 2021-2023 WRANGLER JL 2018-2023 WRANGLER 4XE 2021-2022 WRANGLER ALL TRIM LEVELS 2024 WRANGLER UNLIMITED JL 2018-2023 WRANGLER UNLIMITED ALL TRIM LEVELS 2024 MASERATI LEVANTE ALL TRIM LEVELS 2018 QUATTROPORTE ALL TRIM LEVELS 2017 RAM RAM TRUCK ALL TRIM LEVELS 2013-2021 RAM TRUCK NON-CLASSIC 2022 Pac Audio AP4-CH41 R.2 ManualPac Audio AP4-CH41 ANC and Amplifier LocationsPac Audio AP4-CH41 R.2 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2014 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish, and features. Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio, and all warning chimes Plug & play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin (MS-CAN) Bass knob Knob harness Manual Also available for fast, easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus-controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers, or the subwoofer to confirm if the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system, please contact an authorized Ford service center for further clarification. FORD F-150 ALL TRIM LEVELS 2009-2012 FLEX ALL TRIM LEVELS 2009-2012 FUSION ALL TRIM LEVELS 2010-2012 TAURUS ALL TRIM LEVELS 2010-2012 LINCOLN MKS ALL TRIM LEVELS 2009-2012 MKT ALL TRIM LEVELS 2010-2012 MKX ALL TRIM LEVELS 2007-2010 MKZ ALL TRIM LEVELS 2007-2012 NAVIGATOR ALL TRIM LEVELS 2007-2014 Pac Audio AP4-FD11 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2011-2020 Amplified Ford and Lincoln Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Can be used to upgrade the entire sound system or just part of it thanks to retention of original amplifier Enables the addition of a subwoofer system to the original sound system Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid and treble center frequency selection Retains Sync, Bluetooth audio and all warning chimes Plug & play installation Sub level controller Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module 24-pin and 54-pin harness (MS CAN) (Dual MS CAN) Bass knob Knob harness Manual Also available for fast easy install: APH-FD01 harness (sold separately) Applications This product is compatible with data-bus controlled amplified systems only. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm that the vehicle has a compatible amplified system. If you are unsure of your vehicle having an amplified system please contact an authorized Ford service center for further clarification. 2018-2019 Super Duty Trucks can have either Sony or B&O systems to be compatible. 2019+ Mustang must have B&O System to be compatible. If the amp looks like the one pictured, it is compatible. The amp can be found in the driver's kick panel. If the system is amplified and not badged then the AP4 is not compatible as this is a completely analog system.  FORD EDGE ALL TRIM LEVELS 2015-2017 ESCAPE ALL TRIM LEVELS 2016 EXPEDITION ALL TRIM LEVELS 2015-2017 EXPLORER ALL TRIM LEVELS 2011-2018 F-150 ALL TRIM LEVELS 2013-2017 F-250 ALL TRIM LEVELS 2013-2019 F-350 ALL TRIM LEVELS 2013-2019 F-450 ALL TRIM LEVELS 2013-2019 F-550 ALL TRIM LEVELS 2013-2019 FOCUS ALL TRIM LEVELS 2012-2017 FUSION ALL TRIM LEVELS 2013-2016 MUSTANG ALL TRIM LEVELS 2019-2020 TAURUS ALL TRIM LEVELS 2013-2015 Pac Audio AP4-FD21 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2018-UP Amplified Ford  Vehicles AmpPRO simplifies the installation of upgraded amplifiers in data-bus controlled amplified sound systems. With AmpPRO, you can improve audio performance while keeping an original radio’s fit, finish and features. Benefits Simplifies amplifier installation Prevents need for summing and DSP devices Provides factory sound system upgrade solution Features Simplifies amplifier installation in data-bus controlled factory sound systems Provides variable volume, control, fade, balance, bass, mid, and treble audio settings Retains warning chimes, navigation prompts, Bluetooth®, and telematics audio (if equipped) Front, rear, and sub preamp outputs (5V RMS) Plug-and-play installation with factory-matched harness Sub level controller included Optical output included Applications Vehicle must be equipped with factory B&O system to be compatible Factory amplifier must be removed from vehicle when installing this interface FORD BRONCO ALL TRIM LEVELS 2021-2023 BRONCO SPORT ALL TRIM LEVELS 2021 ECO SPORT ALL TRIM LEVELS 2021 EDGE ALL TRIM LEVELS 2019-2022 ESCAPE ALL TRIM LEVELS 2021-2022 EXPEDITION ALL TRIM LEVELS 2018-2020 EXPLORER ALL TRIM LEVELS 2020-2023 F-150 ALL TRIM LEVELS 2018-2023 F-250 ALL TRIM LEVELS 2020-2023 F-350 ALL TRIM LEVELS 2020-2023 F-450 ALL TRIM LEVELS 2020 LIGHTNING ALL TRIM LEVELS 2022 MAVERICK ALL TRIM LEVELS 2022 MUSTANG MACH E ALL TRIM LEVELS 2021 RANGER ALL TRIM LEVELS 2020-2023 Pac Audio AP4-FD31 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC  Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems.AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Factory sound system upgrade Time-saving design Prevents the need for summing and audio correction devices Reliable PAC quality Features Upgrade solution for factory, fixed level, data-bus controlled sound systems The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes Front, rear, sub, and center channel preamp outputs (5 volt RMS) Provides full range, flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation Remote sub level controller INCLUDED Optional TOSLINK optical output with APA-TOS1 (sold separately) Includes AmpPRO module Harness Bass knob Knob harness Manual Also available for fast, easy install: APH-GM02 harness (sold separately) Applications Must have BOSE factory sound system. Must have Infotainment system RPO code IO5 or IO6 to be compatible. To verify the "IO" RPO code on your vehicle, check the glove compartment or spare tire well for a silver sticker with these codes. If this sticker is not present, you must scan the QR code on the GM label found in the driver's door jamb. The RPO codes will be listed in alphabetical order in either scenario. CADILLAC ATS ALL TRIM LEVELS 2015 CT6 ALL TRIM LEVELS 2017 ESCALADE ALL TRIM LEVELS 2015-2019 CHEVEROLET CAMARO ALL TRIM LEVELS 2016-2018 COLORADO ALL TRIM LEVELS 2015-2018 CORVETTE ALL TRIM LEVELS 2014-2019 CRUZE ALL TRIM LEVELS 2017-2018 EQUINOX ALL TRIM LEVELS 2018 IMPALA NON-CLASSIC 2014-2016 IMPALA ALL TRIM LEVELS 2017-2019 MALIBU NON-CLASSIC 2016 MALIBU ALL TRIM LEVELS 2017-2018 SILVERADO ALL TRIM LEVELS 2014-2018 SILVERADO CLASSIC 2019 SILVERADO HD ALL TRIM LEVELS 2015-2019 SUBURBAN ALL TRIM LEVELS 2015-2019 TAHOE ALL TRIM LEVELS 2015-2019 TRAVERSE ALL TRIM LEVELS 2018-2019 VOLT ALL TRIM LEVELS 2016-2018 GMC ACADIA ALL TRIM LEVELS 2018-2019 CANYON ALL TRIM LEVELS 2015-2018 SIERRA ALL TRIM LEVELS 2014-2018 SIERRA HD ALL TRIM LEVELS 2015-2019 TERRAIN ALL TRIM LEVELS 2018 YUKON ALL TRIM LEVELS 2015-2019 YUKON XL ALL TRIM LEVELS 2015-2019 Pac Audio AP4-GM61 ManualPac Audio AP3-GM61 Radio Locations

Read more less

Add-On Amplifier OEM Integration Interface for Select 2002-2015 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Toyota vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles must be equipped with a center channel and a subwoofer in order for the AP4-TY11 to be compatible: Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY11 to be compatible, the radio must have the 20-pin BHA8113 style connector. Vehicles equipped with the 10 / 6-pin BHA1761 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2011-2013 ES 300 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2002-2003 ES 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2013-2014 ES 330 ALL TRIM LEVELS For AmpPRO: With Double DIN Radio 2004-2006 ES 350 ALL TRIM LEVELS — 2007-2009 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2014 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2009-2013 GX 470 ALL TRIM LEVELS — 2004-2009 HS 250H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 IS 250 ALL TRIM LEVELS — 2006-2009 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS 350 ALL TRIM LEVELS — 2006-2009 IS 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2013 IS F ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2012 LS 430 ALL TRIM LEVELS — 2001-2006 RX 330 ALL TRIM LEVELS — 2004-2006 RX 350 ALL TRIM LEVELS — 2007-2009 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 RX 400H ALL TRIM LEVELS — 2006-2008 RX 450H ALL TRIM LEVELS For AmpPRO: Without Navigation 2010-2015 TOYOTA 4RUNNER ALL TRIM LEVELS — 2003-2013 AVALON ALL TRIM LEVELS — 2005-2012 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 CAMRY ALL TRIM LEVELS — 2007-2011 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2014 COROLLA ALL TRIM LEVELS — 2005-2011 FJ CRUISER ALL TRIM LEVELS — 2011-2014 HIGHLANDER ALL TRIM LEVELS — 2008-2013 LAND CRUISER ALL TRIM LEVELS — 2008 PRIUS ALL TRIM LEVELS — 2004-2011 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2012-2015 RAV4 ALL TRIM LEVELS — 2004-2013 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2005-2012 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style radio harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2014 SIENNA ALL TRIM LEVELS — 2004-2014 TACOMA ALL TRIM LEVELS — 2005-2013 TUNDRA ALL TRIM LEVELS — 2005-2013 VENZA ALL TRIM LEVELS — 2009-2012 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 20-pin BHA8113 style harness 2013-2014 Pac Audio AP4-TY11 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2012-2019 Amplified Lexus and Toyota Vehicles Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered AmpPRO to dramatically simplify the installation of upgraded amplifiers in data-bus-controlled amplified sound systems. AmpPRO allows you to keep the original radio's fit, finish, and features while giving you the freedom to improve the audio performance in record time! Benefits Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Enables the addition of a subwoofer system to the original sound system Upgrade solution for factory, fixed level, data-bus controlled sound systems Everything you need in one box to install your choice of aftermarket amplifier(s) The time-saving design prevents the need for summing and audio correction devices. Variable volume, fade, balance, bass, mid, and treble audio settings Retains Bluetooth, navigation, safety system, and all warning chimes Front, rear, sub preamp outputs (5 volt RMS) Provides flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation with two 20-pin connectors (IE Bus) Remote sub level controller included Optional TOSLINK optical output (APA-TOS1 sold separately) Includes AmpPRO module Harness (IE Bus) Bass knob Knob harness Manual Applications Vehicles with Telematics (ie: SOS, Enform, etc) will require some additional wiring. See manual for details. Vehicle must be equipped with a JBL system. There must be an actual visible label that says JBL or JBL Synthesis. If the vehicle is equipped with a factory amplifier but does not say JBL, it is not compatible because the amplifier is analog and not digital. Lexus vehicles equipped with the Mark Levinson system are not compatible. Lexus vehicles equipped with navigation are not compatible. Lexus CT200h: Must be equipped with a center channel and a subwoofer Between 2012-2015 Toyota used two different styles of connectors. In order for the AP4-TY12 to be compatible, the radio must have the 10 / 6-pin BHA1761 style connector. Vehicles equipped with the 20-pin BHA8113 style connector are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference.   LEXUS CT 200H ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 ES 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 GX 460 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2017 IS 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 IS 250 ALL TRIM LEVELS For AmpPRO: Without Navigation 2014-2015 IS 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 NX 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 NX 300H ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RC 200T ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 300 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 RC 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2015-2017 RX 350 ALL TRIM LEVELS For AmpPRO: Without Navigation 2016-2017 TOYOTA 4RUNNER ALL TRIM LEVELS — 2014-2018 AVALON ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 AVALON ALL TRIM LEVELS — 2015-2018 CAMRY ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2014 CAMRY ALL TRIM LEVELS — 2015-2017 HIGHLANDER ALL TRIM LEVELS — 2014-2018 PRIUS ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2012-2015 PRIUS ALL TRIM LEVELS — 2016-2017 RAV4 ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 RAV4 ALL TRIM LEVELS — 2015-2018 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2013 SEQUOIA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2014 SEQUOIA ALL TRIM LEVELS — 2015-2018 SIENNA ALL TRIM LEVELS — 2015-2017 TACOMA ALL TRIM LEVELS — 2014-2018 TUNDRA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10 / 6-pin BHA1761 Style Radio Harness 2014-2015 TUNDRA ALL TRIM LEVELS — 2016-2019 VENZA ALL TRIM LEVELS For AmpPRO: Equipped with JBL and 10/6-pin BHA1761 style harness 2013-2014 VENZA ALL TRIM LEVELS — 2015-2016 Pac Audio AP4-TY12 ManualPac Audio AP4-TY12 Technical Bulletin

Read more less

Add-On Amplifier OEM Integration Interface for Select 2018-2021 Amplified Lexus and Toyota Vehicles Quickly and seamlessly add aftermarket amplifier(s) for improved audio performance while retaining the factory radio. AmpPRO is a Plug-n-Play solution that plugs into the factory radio harness and provides Front/Rear/Sub RCA outputs (5 Volt RMS) to connect to your aftermarket amplifiers. The AmpPRO design avoids the disappointing results and hassle of interfacing after the factory amplifier.  The harness connects to the radio for easier installation. Provides variable volume, fade, and balance Provides bass, mid and treble audio settings Retains warning chimes and navigation prompts Retains Bluetooth and telematic audio (if equipped) Front/Rear/Sub RCA outputs (5 Volt RMS) Includes sub level controller Optional TOSLINK optical output (APA-TOS1) sold separately. Optional speaker connection harness (APH-TY02) sold separately. Applications Lexus ES250, ES350, and NX300: Only compatible in models equipped with the 8" screen Lexus RX350 and RX450: Not compatible in models equipped with navigation In 2018+ models Toyota used three different styles of connectors on the factory radios. In order for the AP4-TY13 to be compatible, the radio must have the 28 / 10-pin new Toyota style connector. Vehicles equipped with the 20-pin BHA8113  or the 10 / 6 pin BHA1761 style connectors are not compatible. The only way to know what connector the radio has is to physically remove it from the dash and look at it. Please see pictures below for reference. LEXUS ES 250 ALL TRIM LEVELS 2019-2021 ES 350 ALL TRIM LEVELS 2019-2021 NX 300 ALL TRIM LEVELS 2019-2021 RX 350 ALL TRIM LEVELS 2019-2021 RX 450H ALL TRIM LEVELS 2019-2020 TOYOTA 4RUNNER ALL TRIM LEVELS 2019-2020 AVALON ALL TRIM LEVELS 2019-2021 CAMRY ALL TRIM LEVELS 2018-2021 COROLLA ALL TRIM LEVELS 2019 HIGHLANDER ALL TRIM LEVELS 2020-2021 RAV4 ALL TRIM LEVELS 2019-2020 SEQUOIA ALL TRIM LEVELS 2019-2021 SIENNA ALL TRIM LEVELS 2018-2020 TACOMA ALL TRIM LEVELS 2019-2021 TUNDRA ALL TRIM LEVELS 2020-2021 Pac Audio AP4-TY13 (R.2) Manual

Read more less

Add-On Fiber Optic Output for Select Pac-Audio AmpPro Interfaces The APA-TOS1 is a fiber-optic audio output add-on accessory for use with an AmpPRO interface. The APA-TOS1 easily installs in your AmpPRO interface and instantly provides a digital Toslink output. APA-TOS1 is compatible with any brand and length of Toslink cable for connection into a Toslink equipped DSP, or amplifier. Benefits APA-TOS1 provides a pure digital output for aftermarket amplifier and/or DSP installationDigital audio signals are less susceptible to noise/hiss or interference Features Quick and easy installation into any AmpPRO interfaceProvides digital fiber-optic variable audio signal outputCompatible with Toslink equipped DSPs or amplifiers NOTE: Toslink cable is not included Pac Audio AP4-TOS1 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2020 Amplified Alfa-Romeo, Chrysler, Dodge, Fiat, Jeep, Maserati, RAM and Volkswagen Vehicles Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's speaker connection harnesses. This adapter can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. Features: Works with PAC AmpPRO: AP4-CH21, AP4-CH31, and AP4-CH41 Can use it for other installations requiring plug-n-play speaker wire connections Easily add amplifiers without cutting or modifying the vehicle’s original wiring. Provides a plug-n-play connection at the vehicle’s original amplifier location Saves time by quickly utilizing the original speaker wires Harness length 18 inches Applications ALFA ROMEO 4C ALL TRIM LEVELS 2018-2020 CHRYSLER 200 ALL TRIM LEVELS 2015-2017 300 ALL TRIM LEVELS 2012-2019 TOWN & COUNTRY ALL TRIM LEVELS 2008-2016 DODGE CHALLENGER ALL TRIM LEVELS 2015-2020 CHARGER ALL TRIM LEVELS 2012-2020 DART ALL TRIM LEVELS 2013-2016 DURANGO ALL TRIM LEVELS 2011-2020 GRAND CARAVAN ALL TRIM LEVELS 2008-2020 JOURNEY ALL TRIM LEVELS 2009-2020 NITRO ALL TRIM LEVELS 2007-2011 RAM TRUCK ALL TRIM LEVELS 2010-2018 FIAT 500 ALL TRIM LEVELS 2014-2019 JEEP CHEROKEE ALL TRIM LEVELS 2015-2020 GRAND CHEROKEE ALL TRIM LEVELS 2014-2017 LIBERTY ALL TRIM LEVELS 2008-2012 WRANGLER ALL TRIM LEVELS 2008-2017 WRANGLER JK 2018 WRANGLER UNLIMITED ALL TRIM LEVELS 2008-2017 WRANGLER UNLIMITED JK 2018 RAM RAM TRUCK ALL TRIM LEVELS 2010-2015 VOLKSWAGEN ROUTAN ALL TRIM LEVELS 2010-2014 Pac Audio APH-CH01 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2009-2019 Amplified Ford Vehicles Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's Speaker Connection Harness. Can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. Features: Works with PAC AmpPRO: AP4-FD11 and AP4-FD21 It can be used for other installations requiring plug-n-play speaker wire connections. Easily add amplifiers without cutting or modifying the vehicle’s original wiring. Provides a plug-n-play connection at the vehicle’s original amplifier location Saves time by quickly utilizing the original speaker wires Harness length 10 feet Applications Not compatible in 2016-2017 Ford Explorer Platinum Edition FORD EDGE ALL TRIM LEVELS 2015-2017 EXPEDITION ALL TRIM LEVELS 2015-2017 EXPLORER ALL TRIM LEVELS 2011-2017 F-150 ALL TRIM LEVELS 2009-2017 F-250 ALL TRIM LEVELS 2013-2019 F-350 ALL TRIM LEVELS 2013-2019 F-450 ALL TRIM LEVELS 2013-2019 F-550 ALL TRIM LEVELS 2013-2017 FLEX ALL TRIM LEVELS 2009-2012 FOCUS ALL TRIM LEVELS 2012-2017 FUSION ALL TRIM LEVELS 2010-2016 TAURUS ALL TRIM LEVELS 2010-2015 Pac Audio APH-FD01 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2014-2019 Amplified Cadillac, Chevy and GMC Vehicles Simplify speaker wire connections when adding aftermarket amplifiers with Pac-Audio's Speaker Connection Harness. Can easily add amplifiers with no need to cut or modify a vehicle’s original wiring. APH-GM02 works with PAC AmpPRO module: AP4-GM61 Features: Can be used for other installations requiring plug-n-play speaker wire connections Easily add amplifiers without cutting or modifying the vehicle’s original wiring. Provides a plug-n-play connection at the vehicle’s original amplifier location Saves time by quickly utilizing the original speaker wires Harness length 18" Applications CADILLAC ESCALADE ALL TRIM LEVELS 2015-2018 CHEVROLET CAMARO ALL TRIM LEVELS 2016-2018 COLORADO ALL TRIM LEVELS 2015-2018 CORVETTE ALL TRIM LEVELS 2014-2019 CRUZE ALL TRIM LEVELS 2017-2018 EQUINOX ALL TRIM LEVELS 2018 IMPALA NON-CLASSIC 2014-2016 IMPALA ALL TRIM LEVELS 2017-2019 MALIBU NON-CLASSIC 2016 MALIBU ALL TRIM LEVELS 2017-2018 SILVERADO ALL TRIM LEVELS 2014-2018 SILVERADO CLASSIC 2019 SILVERADO HD ALL TRIM LEVELS 2015-2019 SUBURBAN ALL TRIM LEVELS 2015-2018 TAHOE ALL TRIM LEVELS 2015-2019 TRAVERSE ALL TRIM LEVELS 2018-2019 GMC ACADIA ALL TRIM LEVELS 2018-2019 CANYON ALL TRIM LEVELS 2015-2018 SIERRA ALL TRIM LEVELS 2014-2018 SIERRA HD ALL TRIM LEVELS 2015-2019 TERRAIN ALL TRIM LEVELS 2018 YUKON ALL TRIM LEVELS 2015-2019 YUKON XL ALL TRIM LEVELS 2015-2019 Pac Audio APH-GM02 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2005-2021 Amplified Toyota Vehicles Easily add amplifier(s) to Toyota factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY01 speaker connection harness when adding aftermarket amplifier(s) to select Toyota vehicles. Featuring OEM quality, factory style plugs, the APH-TY01 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY01 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY01 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications TOYOTA AVALON ALL TRIM LEVELS 2005-2010 CAMRY ALL TRIM LEVELS 2007-2011 COROLLA ALL TRIM LEVELS 2009-2011 HIGHLANDER ALL TRIM LEVELS 2008-2013 PRIUS ALL TRIM LEVELS 2006-2011 RAV4 ALL TRIM LEVELS 2006-2011 TACOMA ALL TRIM LEVELS 2009-2011 TACOMA ALL TRIM LEVELS 2018-2021 TUNDRA ALL TRIM LEVELS 2007-2021 Pac Audio APH-TY01 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2007-2022 Amplified Toyota and Lexus Vehicles Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY02 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY02 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY02 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 or AP4-TY12 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY02 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications 2018 Toyota Avalon: Only compatible in models with 11 speaker system 2019-2020 Toyota Avalon: Only compatible in models with the 14 speaker system LEXUS CT 200H ALL TRIM LEVELS 2014-2017 ES 250 ALL TRIM LEVELS 2019-2021 ES 300H ALL TRIM LEVELS 2013-2020 ES 350 ALL TRIM LEVELS 2013-2021 GS 350 ALL TRIM LEVELS 2013-2020 GS 450H ALL TRIM LEVELS 2013-2018 GX 460 ALL TRIM LEVELS 2014-2017 IS 200T ALL TRIM LEVELS 2016-2017 IS 250 ALL TRIM LEVELS 2014-2015 IS 300 ALL TRIM LEVELS 2016-2020 NX 200T ALL TRIM LEVELS 2015-2017 NX 300 ALL TRIM LEVELS 2019-2021 NX 300H ALL TRIM LEVELS 2015-2017 RC 200T ALL TRIM LEVELS 2016-2017 RC 300 ALL TRIM LEVELS 2016-2020 RC 350 ALL TRIM LEVELS 2015-2020 RX 350 ALL TRIM LEVELS 2013-2021 RX 450H ALL TRIM LEVELS 2016-2021 TOYOTA AVALON ALL TRIM LEVELS 2013-2020 CAMRY ALL TRIM LEVELS 2012-2021 COROLLA ALL TRIM LEVELS 2019-2021 HIGHLANDER ALL TRIM LEVELS 2014-2021 LAND CRUISER ALL TRIM LEVELS 2013-2021 PRIUS ALL TRIM LEVELS 2012-2021 RAV4 ALL TRIM LEVELS 2013-2021 SIENNA ALL TRIM LEVELS 2021 TUNDRA ALL TRIM LEVELS 2007-2013 TUNDRA ALL TRIM LEVELS 2022 Pac Audio APH-TY02 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2003-2010 Amplified Toyota Vehicles Easily add amplifier(s) to Toyota factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections using the APH-TY03 speaker connection harness when adding aftermarket amplifier(s) to select Toyota vehicles. Featuring OEM quality, factory style plugs, the APH-TY03 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY03 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY03 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications TOYOTA 4RUNNER ALL TRIM LEVELS 2003-2008 COROLLA ALL TRIM LEVELS 2005-2008 PRIUS ALL TRIM LEVELS 2004-2005 RAV4 ALL TRIM LEVELS 2004-2005 SEQUOIA ALL TRIM LEVELS 2005-2007 SIENNA ALL TRIM LEVELS 2004-2010 TACOMA ALL TRIM LEVELS 2005-2008 TUNDRA ALL TRIM LEVELS 2005-2006 Pac Audio APH-TY03 Manual

Read more less

Add-On Amplifier OEM Integration Interface for Select 2006-2021 Amplified Lexus and Toyota Vehicles Easily add amplifier(s) to Toyota and Lexus factory amplified systems without cutting or modifying the original wiring.Simplify speaker wire connections by using the APH-TY04 speaker connection harness when adding aftermarket amplifier(s) to select Toyota and Lexus vehicles. Featuring OEM quality, factory style plugs, the APH-TY04 quickly and securely plugs into the factory amplifier harness allowing an aftermarket amplifier to be more easily installed. Industry-standard wire colors on the APH-TY04 harness make identifying the factory speakers faster and also ensures proper speaker wiring polarity. Key Features Perfect for use with AmpPRO AP4-TY11 and AP4-TY12 EIA standard color-coded wires make identifying factory speaker wires and phase easier APH-TY04 harness eliminates having to run speaker wire throughout the car 18” Harness length Applications 2018-2020 Toyota Sequoia: Only compatible in models equipped with the 14 speaker system LEXUS CT 200H ALL TRIM LEVELS 2011-2013 ES 350 ALL TRIM LEVELS 2007-2012 GS 350 ALL TRIM LEVELS 2007-2011 GS 450H ALL TRIM LEVELS 2007-2011 GX 460 ALL TRIM LEVELS 2010-2013 HS 250H ALL TRIM LEVELS 2010-2012 IS 250 ALL TRIM LEVELS 2006-2013 IS 350 ALL TRIM LEVELS 2006-2013 RX 350 ALL TRIM LEVELS 2008-2012 RX 400H ALL TRIM LEVELS 2007-2008 RX 450H ALL TRIM LEVELS 2012 TOYOTA 4RUNNER ALL TRIM LEVELS 2010-2017 4RUNNER ALL TRIM LEVELS 2019-2021 AVALON ALL TRIM LEVELS 2011-2012 LAND CRUISER ALL TRIM LEVELS 2008-2011 SEQUOIA ALL TRIM LEVELS 2008-2020 SIENNA ALL TRIM LEVELS 2011-2020 TACOMA ALL TRIM LEVELS 2012-2017 VENZA ALL TRIM LEVELS 2009-2016 Pac Audio APH-TY04 Manual

Read more less

Add-On OE Amplifier-Integration Wiring-Harness for Select 2021-UP Amplified Chrysler, Dodge, Jeep and RAM Vehicles with uConnect5 Factory Audio Systems  Must be used with AP4-CH41 R.2 Plug and play solution for UConnect5 that allows you to use an AmpPRO with most Chrysler vehicles.  Benefits  Simplifies amplifier installation Prevents the need for summing and DSP devices Provides factory sound system upgrade solution Provides flat audio output for a solid audio foundation Features It can be used to upgrade the entire sound system or just part of it thanks to the retention of the original amplifier Variable volume, fade, balance, bass, mid and treble audio settings Front, rear, sub preamp outputs (5 volt RMS) Customized OE bass, mid and treble center frequency selection Retains uConnect, Bluetooth audio, Navigation prompts, and all warning chimes Plug-n-Play installation Sublevel controller Optional TOSLINK optical output (APA-TOS1 sold separately) Also available for fast, easy install: APH-CH01 harness (sold separately) Select non-amplified vehicles are equipped with an ANC system that requires bypass.  Plug-n-Play bypass harness: ANC-CH01  Applications Must be used with AP4-CH41 R.2 Amplified Vehicles Compatible with all data-bus controlled amplified systems, no matter the screen size. To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has a compatible amplified system: Alpine, Beats or Harman Kardon. Some vehicles may not always have branded compatible systems. Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer. Non-Amplified Vehicles All other models: Only compatible in vehicles equipped with the 7” or bigger screen. Vehicles equipped with the 5” screen are not compatible. If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4-channel variable output after it has been re-configured by the AmpPRO. For example, this will not work to add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly. CHRYSLER PACIFICA ALL TRIM LEVELS 2021-2022 DODGE DURANGO ALL TRIM LEVELS 2021 RAM TRUCK NON-CLASSIC 2022 JEEP WRANGLER ALL TRIM LEVELS 2024 WRANGLER UNLIMITED ALL TRIM LEVELS 2024 RAM RAM TRUCK NON-CLASSIC 2022 No Manual Available

Read more less

Factory Backup-Camera to Aftermarket Head-Unit Wiring Harness for Select 2012-2015 Toyota, Scion and Subaru Vehicles The CAM-TY11 is a reverse camera T-harness that gives the ability to add a reverse camera input for Toyota and select Scion and Subaru 6.1” touchscreen radios. The harness is Plug-and-Play with no need to connect to reverse lamps for the reverse trigger. Applications SCION FRS 2013-2015 IQ 2013-2015 TC 2014-2015 XB 2013-2015 XD 2013-2014 SUBARU BRZ 2013-2015 TOYOTA 4RUNNER 2012-2014 AVALON 2012-2014 CAMRY 2012-2014 COROLLA 2013 HIGHLANDER 2012-2014 PRIUS 2012-2015 PRIUS V 2012-2014 RAV4 2012-2014 SEQUOIA 2013 TACOMA 2012-2013 VENZA 2012-2014

Read more less

HDMI and USB-Port With Splash-Resistant Cover and Optional Mounting-Bracket Single piece design mounts both an HDMI and USB extension cable to your vehicle for use with your aftermarket head unit. Extension cables are each 3 feet long. The Splash-resistant cover is perfect for boats, or recreational vehicles. The optional dash-bracket provides an additional mounting surface if needed.

Read more less

Audio Line-Output Converter with Rotary Volume Control

Read more less

12-Volt Audio-System Ground-Loop Isolator

Read more less

RadioPRO Radio Replacement Interface Harness for Select 2013-2018 Mercedes Sprinter and Metris Vehicles The RP4.2-MB11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in Mercedes Sprinter or Metris vehicles. Steering wheel controls, 3.5mm AUX input, USB port and the back-up camera function are all retained with the RP4.2-MB11. By adding on the PAC VS41, you have the ability to add front and blind-spot cameras creating a complete camera system. PAC quality and engineering provides you the most professional installation solution available! Retains: Steering wheel controls 3.5mm AUX input USB port Back-up camera function Features: Includes wired outputs for navigation radio installation Rear camera activation while in motion 10 Amp ACC 12 volt output Direct USB updatable Camera system ready - requires PAC VS41 Includes: Vehicle specific harness Interface module Installation instructions Applications Sprinters with the radio delete option need the RP4.2-MB21 harness 2016 MERCEDES-BENZ METRIS 2013-2018 MERCEDES-BENZ SPRINTER Pac Audio RP4.2-MB11 ManualPac Audio RP4.2-MB11 Technical Bulletin

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2014-2019 Non-Amplified Silverado and Sierra Vehicles PAC's RadioPRO GM full-size truck kit is for Stinger's HEIGH10 multimedia head unit. The SR-GM14H kit enables you to replace a GM factory radio with a show-stopping HEIGH10 infotainment system while retaining most OEM features and maintaining a flush, factory look and feel, and adds upgraded features including Apple CarPlay, Android Auto, and more to your GM truck's stereo system *UN1810/HEIGH10 sold separately Complete feature retention: warning chimes, OnStar, factory WiFi, SWC  OEM safety: front park assist, rear park assist, reverse camera (if equipped) Custom-tuned vehicle settings with a PAC-UP USB adapter (sold separately) Complete plug-n-play system: no vehicle modifications needed! Flush-mounted plastics for a seamless OEM experience FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING The secure mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips while towing or carrying anything in your truck bed. KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-matched radio mounting panels for HEIGH10 (for any previous size of OEM radio) RP5-GM51 RadioPRO for GM vehicles* PAC CMX chime module Complete installation harnesses Dash-mount dual USB cable Antenna adapters for satellite and AM/FM radio *Not compatible with BOSE-equipped vehicles Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2014-2018 CHEVROLET SILVERADO ALL TRIM LEVELS — 2019 CHEVROLET SILVERADO CLASSIC — 2015-2019 CHEVROLET SILVERADO HD ALL TRIM LEVELS — 2014-2018 GMC SIERRA ALL TRIM LEVELS — 2015-2019 GMC SIERRA HD ALL TRIM LEVELS — Pac Audio SR-GM14H Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2011-2018 Amplified and Non-Amplified Wrangler Vehicles RadioPRO Jeep kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Jeep Wrangler JK factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your Jeep's stereo system! *UN1810/HEIGH10 sold separately Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included). Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped) Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals Dual USB connection ports Complete plug-and-play system: no vehicle modifications needed! Flush-mounted plastics for a seamless OEM experience FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING The rugged mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips, and potholes that are on your trail.  KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-Matched Radio Mounting Panels for HEIGH10  RP4-CH11 RadioPRO for Jeep Vehicles Complete Plug-N-Play Installation Harnesses Dash-Mount Dual USB Cable Antenna Adapters for Satellite and AM/FM Radio *HEIGH10 sold separately **Not compatible with Panoramic View Monitor (PVM) camera vehicles Due to continual development, features and specifications are subject to change. Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2011-2017 JEEP WRANGLER ALL TRIM LEVELS — 2018 JEEP WRANGLER JK — 2011-2017 JEEP WRANGLER UNLIMITED ALL TRIM LEVELS — 2018 JEEP WRANGLER UNLIMITED JK — Pac Audio SR-JK11H Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2016-2021 Amplified and Non-Amplified Toyota Tacoma Vehicles RadioPRO Tacoma kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Tacoma factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your truck's stereo system! *UN1810/HEIGH10 sold separately Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included). Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped) Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals Complete plug-n-play system: no vehicle modifications needed! Flush-mounted plastics for a seamless OEM experience FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING The secure mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips while towing or carrying anything in your truck bed. KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-Matched Radio Mounting Panels for HEIGH10 RP4.2-TY11 RadioPro for Toyota Vehicles Complete Plug-N-Play Installation Harnesses Adapters for AM/FM, GPS, USB, and Sirius XM (SXV Module Required) **Not compatible with Panoramic View Monitor (PVM) camera vehicles Due to continual development, features and specifications are subject to change. Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2016-2021 TOYOTA TACOMA ALL TRIM LEVELS — Pac Audio SR-TAC16H Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2014-2021 Amplified and Non-Amplified Toyota Tundra Vehicles RadioPRO Tundra kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace a Tundra factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your truck's stereo system! *UN1810/HEIGH10 sold separately Dash kit and mounting included for a beautiful factory look with the HEIGH10 Stinger display (not included). Complete feature retention: warning chimes, steering-wheel-mounted radio controls, factory amplifier (if equipped) Vehicle-to-radio connectivity: vehicle speed, illumination, reverse, and parking brake signals Complete plug-n-play system: no vehicle modifications needed! Flush-mounted plastics for a seamless OEM experience FLUSH-FITTED TO MINIMIZE VIBRATION & SHAKING The secure mounting system was engineered to hold your HEIGH10 system securely to withstand any bumps, dips while towing or carrying anything in your truck bed. KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-Matched Radio Mounting Panels for HEIGH10 RP4.2-TY11 RadioPro for Toyota Vehicles Complete Plug-N-Play Installation Harnesses Adapters for AM/FM, GPS, USB, and Sirius XM (SXV Module Required) Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2014-2021 TOYOTA TUNDRA ALL TRIM LEVELS — Pac Audio SR-TUN14H Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2015-2021 Amplified and Non-Amplified Dodge and Chrysler Vehicles RadioPRO Advanced fully integrated kit for Stinger’s HEIGH10 infotainment system. The kit enables you to replace your car's factory radio with a show-stopping HEIGH10 multimedia display, while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your car's stereo system!   *Not compatible with SRT or Hellcat Models *UN1810/HEIGH10 sold separately Flush-mounted plastics for a seamless OEM experience. Includes plastics for all OEM radio options.View and adjust vehicle information through customized screens: Complete climate controls Real-time performance gauges Tire pressures, door status, engine status, and other vehicle information Access to over 70+ customizable vehicle settings (when equipped) KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory matched mounting dash kits for HEIGH10 (sold separately)  CH4A-SRK RadioPRO Advanced vehicle integration module PAC-Link adapter for Stinger multimedia units High-definition factory camera retention module Vehicle specific plug-n-play wire harness Satellite antenna adapter AM/FM antenna adapter USB retention cables External chime speaker PERFORMANCE CONSOLE Speed RPM Current/Best 0-60-mph time Current/Best 60-0-mph brake distance Current/best ¼ mile time VEHICLE GAUGES Eight gauges on screen, save up to 2 presets Battery voltage Oil temperature Oil pressure Transmission temperature Coolant temperature and many more functions VEHICLE INFORMATION SCREEN Tire pressure with custom pressure threshold Current vehicle status - including door open/closed View and clear check engine status CLIMATE CONTROL SCREEN On-screen climate control retained Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2015-2021 CHRYSLER 300 ALL TRIM LEVELS — 2015-2021 DODGE CHALLENGER ALL TRIM LEVELS — 2015-2021 DODGE CHARGER ALL TRIM LEVELS — Pac Audio SRK-CHR15H Installer GuidePac-Audio SRK-CHR15H Charger Installation ManualPac-Audio SRK-CHR15H Challenger Installation ManualPac-Audio SRK-CHR15H Chrysler-300 Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2018-UP Amplified and Non-Amplified Wrangler-JL and Gladiator-JT Vehicles RadioPRO Advanced fully integrated Jeep kit for Stinger’s HEIGH10 multimedia head unit. SRK-JW18EH enables you to replace a Jeep Wrangler or Gladiator factory radio with a show-stopping HEIGH10 while retaining factory features and adding even more upgraded features! *UN1810/HEIGH10 sold separately Dash kit and mounting hardware included for a beautiful factory look with either the HEIGH10* Stinger multimedia head unit Enables interactive on-screen climate controls, vehicle settings, & customizable vehicle performance apps Provides more control over your installation with RadioPRO Advanced controlled camera triggers, steering wheel controls, and factory amplifier control All factory cameras in full high-definition Dual-zone and Manual factory climate control (please check Compatibility Notes tab) Factory amplifier Factory USB ports Safety group chimes, including ParkSense® Steering wheel controls Auxiliary switch panel settings Heated seats / heated steering wheel On-screen vehicle settings menu KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory-matched mounting dash kits for HEIGH10 RadioPRO Advanced vehicle integration module PAC-Link adapter for Stinger multimedia units High-definition factory camera retention module Vehicle-specific plug-n-play wire harness Satellite antenna adapter AM/FM antenna adapter USB retention cables External chime speaker Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2020-2022 JEEP GLADIATOR ALL TRIM LEVELS — 2018-2022 JEEP WRANGLER JL — 2018-2022 JEEP WRANGLER UNLIMITED JL — Pac Audio SRK-JW18EH Installation Manual

Read more less

Ten-Inch-Size Heigh10 Head-Unit Replacement Dash Kit for Select 2013-2021 Amplified and Non-Amplified RAM Pickups Compatible with all OEM radio options including base, 5-inch, and 8.4-inch infotainment systems RadioPRO Advanced fully integrated RAM kit for Stinger’s HEIGH10* infotainment system. The kit enables you to replace a RAM factory radio with a show-stopping HEIGH10 multimedia display while retaining most factory features and adding even more upgraded features, including Apple CarPlay, Android Auto, and more to your RAM Truck stereo system!  *UN1810/HEIGH10 sold separately Flush-mounted plastics for a seamless OEM experience. Includes plastics for all OEM radio options.View and adjust vehicle information through customized screens: Complete climate controls Real-time performance gauges Tire pressures, door status, engine status, and other vehicle information Access to over 70+ customizable vehicle settings (when equipped) KIT INCLUDES EVERYTHING NEEDED FOR THE INSTALLATION* INCLUDING:  Factory matched mounting dash kits for HEIGH10 (sold separately)  CH4A-SRK RadioPRO Advanced vehicle integration module PAC-Link adapter for Stinger multimedia units High-definition factory camera retention module Vehicle specific plug-n-play wire harness Satellite antenna adapter AM/FM antenna adapter USB retention cables External chime speaker Applications - confirmed as of 2/10/2023 Year(s) Make Model Trim Level Additional Info 2013-2018 DODGE RAM TRUCK ALL TRIM LEVELS — 2019-2021 DODGE RAM TRUCK CLASSIC — 2013-2018 RAM RAM TRUCK ALL TRIM LEVELS — 2019-2021 RAM RAM TRUCK CLASSIC — Pac Audio SRK-RAM13H Installation Manual

Read more less

Replacement Tip-Sleeve Microphone for Select Alpine Head-Units Replacement Microphone for Bluetooth enabled Alpine stereos with a tip and sleeve connector.

Read more less

Aftermarket Radio Add-on Vehicle USB-Port with 12-Inch Extension The female end of the cable features a flush mountable design. You can simply drill a 3/4” hole at the desired mounting location and snap the end of the cable in for an OEM look. Ideal for er aftermarket head units such as Pioneer, Kenwood and Alpine that feature a rear USB input

Read more less

Input Voltage of 10V to 24V*, Selectable Output to 3.3V, 5V, 6V or 9V No programming is required. Use the 4-position switch to select the desired voltage output and install the VOLT-39. Not intended for installation in 24V systems

Read more less